CISCO-LWAPP-QOS-MIB Download
This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information provided by this MIB is used to study
the quality of service in the voice and video traffic
on the WLAN.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-LWAPP-QOS-MIB
- cLQd11aVoiceAdmCtrlSupport
- This object is used to enable or disable admission control for voice traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11aVoiceMaxAdmBandwidth) and roaming-bandwidth ...
- cLQd11aVoiceMaxAdmBandwidth
- This object denotes the maximum bandwidth that can be allocated by controller for voice traffic when admission control is enabled for for 802.11a interfaces in the controller. Please note that the write operation on this object will be successful only if ...
- cLQd11aVoiceMaxRoamBandwidth
- This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVoiceMaxAdmBandwidth, that can be allocated to roaming clients for voice traffic, when admission control is enabled for 802.11a interfaces in the controll ...
- cLQd11aVideoAdmCtrlSupport
- This object is used to enable or disable admission control for video traffic flowing through the 802.11a interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11aVideoMaxAdmBandwidth) and roaming-bandwidth ...
- cLQd11aVideoMaxAdmBandwidth
- This object denotes the maximum bandwidth that can be allocated by controller for video traffic when admission control is enabled for 802.11a interfaces in the controller. When set to 0, all available bandwidth in 802.11a interfaces can be allocated to v ...
- cLQd11aVideoMaxRoamBandwidth
- This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11aVideoMaxAdmBandwidth, that can be allocated to roaming clients for video traffic, when admission control is enabled for 802.11a interfaces in the controll ...
- cLQd11bVoiceAdmCtrlSupport
- This object is used to enable or disable admission control for voice traffic flowing through the 802.11b/g interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11bVoiceMaxAdmBandwidth) and roaming-bandwid ...
- cLQd11bVoiceMaxAdmBandwidth
- This object denotes the maximum bandwidth that can be allocated by controller for voice traffic when admission control is enabled for 802.11b/g interfaces in the controller. Please note that the write operation on this object will be successful only if th ...
- cLQd11bVoiceMaxRoamBandwidth
- This object represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11bVoiceMaxAdmBandwidth, that can be allocated to roaming clients for voice traffic, when admission control is enabled for 802.11b interfaces in the controll ...
- cLQd11bVideoAdmCtrlSupport
- This object is used to enable or disable admission control for video traffic flowing through the 802.11b/g interfaces in the controller. When set to 'true', controller will reserve and manage max-bandwidth (cLQd11bVideoMaxAdmBandwidth) and roaming-bandwid ...
- cLQd11bVideoMaxAdmBandwidth
- This object denotes the maximum bandwidth that can be allocated by controller for video traffic when admission control is enabled for 802.11b/g interfaces in the controller. When set to 0, all available bandwidth in 802.11b/g interfaces can be allocated ...
- cLQd11bVideoMaxRoamBandwidth
- This objects represents the bandwidth relative to the maximum allocated bandwidth indicated by cLQd11bVideoMaxAdmBandwidth, that can be allocated to roaming clients for video traffic, when admission control is enabled for 802.11b interfaces in the control ...
- cLQd11aGprProbeInterval
- This object is used to set GPR probe interval period to be used by all 802.11a interfaces in the controller, when the radios are advertising any WLAN with GPR support enabled. Please note that the write operation on this object will be successful only if ...
- cLQd11aVoiceCtrl
- When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11aVoic ...
- cLQd11aExpeditedBw
- This object specifies if expedited BW feature is enabled or not. A value of 'true' will ensure that the APs advertise the expedited BW support in their beacons and association responses. A value of 'false' will ensure that the APs do not advertise the exp ...
- cLQd11bGprProbeInterval
- This object is used to set GPR probe interval period to be used by all 802.11b/g interfaces in the controller, when the radios are advertising any WLAN with GPR support enabled. Please note that the write operation on this object will be successful only i ...
- cLQd11bVoiceCtrl
- When admission control is enabled these parameters can be modified. loadBased - controller will reserve and manage max-bandwidth and roaming-bandwidth based on the load on the WLAN. static - controller will reserve and manage max-bandwidth (cLQd11bVoic ...
- cLQd11bExpeditedBw
- This object specifies if expedited BW feature is enabled or not. A value of 'true' will ensure that the APs advertise the expedited BW support in their beacons and association responses. A value of 'false' will ensure that the APs do not advertise the exp ...
- cLQd11GprTable
- This table populates the GPR configuration on the WLANs configured on this controller. There exists a row in this table for each WLAN configured through cLWlanConfigTable. A row is added is to this table by the agent when a WLAN is created by the user th ...
- cLQd11GprEntry
- Each entry represents a conceptual row in cLQd11GprTable and corresponds to the GPR configuration on a WLAN.
- cLQd11GprSupport
- If 'true', then the corresponding radios that advertise this WLAN, will send Gratuitous Probe Response. If 'false', then the corresponding radios that advertise this WLAN, will not send Gratuitous Probe Response.
- cLQd11CACStatsTable
- This table populates the call admission control metrics collected by observing the voice or video traffic on the dot11 interface of a particular AP. There exists a row in this table for each row corresponding to a dot11 interface found in cLApDot11IfTable ...
- cLQd11CACStatsEntry
- Each entry represents a conceptual row in CLQd11CACStatsTable and corresponds to the admission control statistics for a particular dot11 interface.
- cLQd11CacVoiceBwInUse
- This object indicates the voice bandwidth in use as a percentage of the bandwidth configured through cLQd11aVoiceMaxAdmBandwidth or cLQd11bVoiceMaxAdmBandwidth, depending on the type of this dot11 interface.
- cLQd11CacVideoBwInUse
- This object indicates the video bandwidth in use as a percentage of the bandwidth configured through cLQd11aVideoMaxAdmBandwidth or cLQd11bVideoMaxAdmBandwidth, depending on the type of this dot11 interface.
- cLQd11CacVoiceCallsInProgress
- This object indicates the count of the number of voice calls currently in progress on this dot11 interface.
- cLQd11CacRoamVoiceCallsInProg
- This object indicates the count of the number of voice calls initiated from roaming clients currently in progress on this dot11 interface.
- cLQd11CacTotalVoiceCallsAP
- This object indicates the count of the number of voice calls observed on this dot11 interface ever since this AP has joined the controller.
- cLQd11CacTotalRoamCallsAP
- This object indicates the count of the number of voice and video calls initiated from roaming clients observed on this dot11 interface ever since this AP has joined the controller.
- cLQd11CacVoiceCallsRejectedAP
- This object indicates the count of the number of voice calls observed as rejected on this dot11 interface, ever since this AP has joined the controller.
- cLQd11CacRoamCallsRejectedAP
- This object indicates the count of the number of voice and video calls initiated from roaming clients observed as rejected on this dot11 interface, ever since this AP has joined the controller.
- cLQd11CacRejCallsInsufBw
- This object indicates the count of the number of calls observed as rejected on this dot11 interface due to insufficient bandwidth, ever since this AP has joined the controller.
- cLQd11CacRejCallsBadParams
- This object indicates the count of the number of calls observed as rejected on this dot11 interface due to mismatch in call parameters, ever since this AP has joined the controller.
- cLQd11CacRejCallsPhyRate
- This object indicates the count of the number of calls observed as rejected on this dot11 interface due to mismatch in 802.11 data rates, ever since this AP has joined the controller.
- cLQd11CacRejCallsQosPolicy
- This object indicates the count of the number of calls observed as rejected on this dot11 interface due to restrictions imposed by QOS policies, ever since this AP has joined the controller.
- ciscoLwappQosDot11aConfigGroup
- This collection of objects represents the quality-of-service parameters 802.11a networks.
- ciscoLwappQosDot11bConfigGroup
- This collection of objects represents the quality-of-service parameters 802.11b networks.
- ciscoLwappQosDot11WlanConfigGroup
- This collection of objects represents the quality-of-services parameters on a particular WLAN.
- ciscoLwappQosDot11CacStatsGroup
- This collection of objects provide the call admission control statistics observed on the dot11 interfaces of an AP.
- ciscoLwappQosDot11aConfigGroupSup1
- This collection of objects represents the quality-of-service parameters 802.11a networks.
- ciscoLwappQosDot11bConfigGroupSup1
- This collection of objects represents the quality-of-service parameters 802.11b networks.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
