CISCO-LWAPP-REAP-MIB Download
This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
Information represented by this MIB is passed by the
controller to those Cisco LWAPP APs, that can
operate in stand-alone mode.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-LWAPP-REAP-MIB
- cLReapWlanConfigTable
- This table represents the WLAN configuration sent by the controller to REAPs so that the APs can operate in stand-alone mode. LWAPP APs operating in REAP mode locally switch the data frames of the associated clients, rather than tunneling them through to ...
- cLReapWlanConfigEntry
- Each entry represents a conceptual row in cLReapWlanConfigTable and corresponds to the packet switching configuration for a particular WLAN.
- cLReapWlanEnLocalSwitching
- This object indicates the behavior of the REAP when switching the data frames of the clients associated to it through the WLAN identified by cLWlanIndex. A value of 'true' indicates that the AP, on which this WLAN is configured, may locally switch the dat ...
- cLReapApConfigTable
- This table represents the VLAN configuration of REAPs. The agent adds a row to this table corresponding to each row representing a REAP in cLApTable of the CISCO-LWAPP-AP-MIB. The agent deletes the row either when the AP dissociates from the controller o ...
- cLReapApConfigEntry
- Each entry represents a conceptual row in cLReapApConfigTable and corresponds to the VLAN configuration of a REAP.
- cLReapApNativeVlanId
- This object defines the Native VLAN ID for the particular AP identified by cLApSysMacAddress. Note that this particular object can be modified through a Set request only if the AP is a REAP. The agent is expected to reject the attempt to set this object f ...
- cLReapApVlanEnable
- This object indicates the availability of Native VLAN configured through cLReapApNativeVlanId on this REAP. A value of 'true' indicates that the VLAN configured as native through cLReapApNativeVlanId is enabled on the REAP and that the REAP can reach the ...
- cLReapApVlanIdTable
- This table defines the WLAN / VLAN Id mappings to be configured for the REAP identified by cLApSysMacAddress. VLAN Id configured through this table is passed to the respective REAP through the 'Add WLAN' LWAPP message, sent as part of the 'Configure Respo ...
- cLReapApVlanIdEntry
- Each entry represents a conceptual row that corresponds to one WLAN / VLAN Id mapping to be applied to the REAP identified by cLApSysMacAddress.
- cLReapApVlanId
- This object represents the VLAN ID to be mapped to the WLAN identified by cLWlanIndex.
- cLReapGroupConfigTable
- This table represents the configuration for REAPs so that the APs can be configured as a group. Entries are added or deleted by the user through the use of cLReapGroupRowStatus.
- cLReapGroupConfigEntry
- Each entry represents a conceptual row in cLReapGroupConfigTable.
- cLReapGroupName
- This object uniquely identifies an entry in cLReapGroupConfigTable.
- cLReapGroupPrimaryRadiusIndex
- The object represents the value that maps to the primary RADIUS server for this group. A value of 0 indicates that the primary RADIUS server is not configured for this group.
- cLReapGroupSecondaryRadiusIndex
- The object represents the value that maps to the secondary RADIUS server for this group. A value of 0 indicates that the primary RADIUS server is not configured for this group.
- cLReapGroupStorageType
- This object represents the storage type for this conceptual row.
- cLReapGroupRowStatus
- This object represents the status column for a conceptual row in this table.
- cLReapGroupApConfigTable
- This table represents the group associated with an AP. Entries are added or deleted by the user through the use of cLReapGroupApRowStatus.
- cLReapGroupApConfigEntry
- Each entry represents a conceptual row in cLReapGroupApConfigTable.
- cLReapGroupApStorageType
- This object represents the storage type for this conceptual row.
- cLReapGroupApRowStatus
- This object represents the status column for a conceptual row in this table.
- ciscoLwappReapWlanConfigGroup
- This collection of objects represent the WLAN configuration to be passed to the REAP.
- ciscoLwappReapApConfigGroup
- This collection of objects represent the information needed by the REAP AP to locally switch the client data packets. The collection also includes the VLAN configuration on the REAP.
- ciscoLwappReapGroupConfigGroup
- This collection of objects represent the information needed by the REAP APs to configure REAP groups.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
