CISCO-LWAPP-WLAN-SECURITY-MIB Download
This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information provided by this MIB is for WLAN security
related features as specified in the CCKM, CKIP
specifications.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-LWAPP-WLAN-SECURITY-MIB
- cLWSecDot11EssCckmTable
- This table represents the CCKM configuration for the WLANs configured on this controller. There exist a row in this table corresponding to each row representing a WLAN in cLWlanConfigTable. The controller adds or deletes a row to this table whenever a WL ...
- cLWSecDot11EssCckmEntry
- Each entry represents a conceptual row in cLWSecDot11EssCckmTable and uniquely identified by cLWlanIndex.
- cLWSecDot11EssCckmWpaSupport
- This object is used to enable or disable layer-2 security using WPA1 or WPA2. When this object is set to 'true' layer-2 security is enabled. When this object is set to 'false' layer-2 security is disabled. When layer-2 security is enabled, the following ...
- cLWSecDot11EssCckmWpa1Security
- A value of 'true' indicates that WPA1 security is enabled on the controller. A value of 'false' disables WPA1 security.
- cLWSecDot11EssCckmWpa1EncType
- This object indicates the type of WPA1 encryption configured on this WLAN. The value populated by this object is applicable only when cLWSecDot11EssCckmWpa1Security populates a value of 'true'.
- cLWSecDot11EssCckmWpa2Security
- A value of 'true' indicates that WPA2 security is enabled on the controller. A value of 'false' disables WPA2 security.
- cLWSecDot11EssCckmWpa2EncType
- This object indicates the type of WPA2 encryption configured on this WLAN. The value populated by this object is applicable only when cLWSecDot11EssCckmWpa2Security populates a value of 'true'.
- cLWSecDot11EssCckmKeyMgmtMode
- This object indicates the type of authentication key management that is applicable only when cLWSecDot11EssCckmWpaSupport is set to a value of 'true'. The following are the possible key management configurations allowed and accepted by the system. dot1x + ...
- cLWSecDot11EssPskFmt
- This object indicates the type of the authentication preshared key configured through the object cLWSecDot11EssCckmPsk. Note that the key configuration is applicable only when psk is configured as the key management mechanism through the cLWSecDot11EssCc ...
- cLWSecDot11EssPsk
- This object indicates the authentication pre-shared key in the hex format that is applicable only when the 'psk' bit is specified in the cLWSecDot11EssCckmKeyMgmtMode object. The length of the key that can be specified for the cLWSecDot11EssPsk object dep ...
- cLWSecDot11EssCkipTable
- This table represents the CKIP parameters of a WLAN. This is a new layer-2 security policy similar to static WEP. User can select this policy on a WLAN. This policy will be allowed to be configured only when Aironet Extensions are enabled on the WLAN. On ...
- cLWSecDot11EssCkipEntry
- Each entry represents a conceptual row in cLWSecDot11EssCkipTable and uniquely identified by cLWlanIndex.
- cLWSecDot11EssCkipSecurity
- This object is used to enable to disable layer-2 CKIP as security policy for this WLAN. When this object is set to 'true', layer-2 CKIP security is enabled. When this object is set to 'false', layer-2 CKIP security is disabled.
- cLWSecDot11EssCkipKeyIndex
- This object represents the key index corresponding to the key being configured. A value of 0 indicates that the CKIP key hasn't been configured.
- cLWSecDot11EssCkipKeyLength
- This object indicates the length of CKIP key in bits that is applicable only when cLWSecDot11EssCkipSecurity is set as 'true'.
- cLWSecDot11EssCkipKeyFmt
- This object indicates the type of the key configured through the object cLWSecDot11EssCkipKey.
- cLWSecDot11EssCkipKey
- This object indicates the CKIP key that is applicable only when cLWSecDot11EssCkipSecurity is set as 'true'. The number of characters to be configured depends on the key length and the key type configured through the objects cLWSecDot11EssCkipKeyLength an ...
- cLWSecDot11EssCkipMMHMode
- This object is used to enable or disable MMH MIC mode for the CKIP for this WLAN. 'true' - MMH MIC mode is enabled 'false' - MMH MIC mode is disabled.
- cLWSecDot11EssCkipKPEnable
- When the value is set to 'true', the encryption keys will be generated by permuting the static CKIP key configured through cLWSecDot11EssCkipKey.
- ciscoLwappWlanSecurityCckmConfigGroup
- This collection of objects represents CCKM related security parameters on a WLAN. The collection also configures the pre-shared keys when PSK is configured as the key management type.
- ciscoLwappWlanSecurityCkipConfigGroup
- This collection of objects represents CKIP related security parameters on a WLAN.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
