CISCO-MEDIA-QUALITY-MIB Download

cmqVoIPCallActiveTable

This table is the VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.

cmqVoIPCallActiveEntry

An entry (conceptual row) in the cmqVoIPCallActiveTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when ...

cmqVoIPCallActiveConnectionId

The global connection identifier for the active VoIP leg of the call.

cmqVoIPCallActiveCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqVoIPCallActiveRxCodecId

The codec type of the endpoint for the established voice path.

cmqVoIPCallActiveRxSevConcealRatioPct

The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.

cmqVoIPCallActiveRxCallConcealRatioPct

The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.

cmqVoIPCallActiveRxPktLossRatioPct

The ratio of total effective received packet loss to the number of RTP packets expected.

cmqVoIPCallActiveRxRoundTripTime

The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.

cmqVoIPCallActiveRxCallDur

Duration of receive path open from this peer to voice gateway for the call leg.

cmqVoIPCallActiveRxVoiceDur

Duration of speech received from this peer to voice gateway for the call leg.

cmqVoIPCallActiveRxPktLossConcealDur

The sum of error predictive concealment and bad protocol concealment in milliseconds.

cmqVoIPCallActiveRxPktCntExpected

The expected number of packets to be received.

cmqVoIPCallActiveRxPktCntNotArrived

The expected number of packets minus the number of received packets.

cmqVoIPCallActiveRxPktCntComfortNoise

The number of received comfort noise packets for the call leg.

cmqVoIPCallActiveRxPktCntUnusableLate

The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.

cmqVoIPCallActiveRxPktCntDiscarded

The sum of the number of late packets and the number of bad protocol packets.

cmqVoIPCallActiveRxPktCntEffLoss

The total number of never-arrived packets and the number of discarded packets.

cmqVoIPCallActiveRxUnimpairedSecOK

The cumulative number of seconds during which there was no concealment and is considered as OK seconds.

cmqVoIPCallActiveRxConcealSec

The cumulative number of seconds during which there was some concealment.

cmqVoIPCallActiveRxSevConcealSec

The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.

cmqVoIPCallActiveRxJBufMode

The jitter buffer mode configured for the endpoint. adaptive (1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer i ...

cmqVoIPCallActiveRxJBufNomDelay

The nominal jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallActiveRxJBufDlyNow

The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.

cmqVoIPCallActiveRxJBufLowWater

The minimum jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallActiveRxJBuffHiWater

The maximum jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallActive3550JShortTermAvg

The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.

cmqVoIPCallActive3550JCallAvg

The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.

cmqVoIPCallActiveRxSignalLvl

The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.

cmqVoIPCallActiveRxPred107Rscore

The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPred107RMosListen

The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPred107RScoreConv

The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPred107RMosConv

Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPred107CodecIeBase

The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.

cmqVoIPCallActiveRxPred107CodecBPL

The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.

cmqVoIPCallActiveRxPred107DefaultR0

R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.

cmqVoIPCallActiveRxPred107IeEff

Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec t ...

cmqVoIPCallActiveRxPred107Idd

Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.

cmqVoIPCallActiveRxPredMosLqoAvg

The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPredMosLqoRecent

The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPredMosLqoBaseline

The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPredMosLqoMin

The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPredMosLqoNumWin

A window in 8 seconds of frame loss data required to calculate the MOS estimate.

cmqVoIPCallActiveRxPredMosLqoBursts

The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallActiveRxPredMosLqoFrLoss

The average frame loss count since call start.

cmqVoIPCallActiveRxPredMosLqoVerID

The MOS K-factor version ID, e.g. CVTQ v0.95

cmqVoIPCallActiveTxCodecId

The codec type of the endpoint for the established voice path.

cmqVoIPCallActiveTxVadEnabled

This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqVoIPCallActiveTxTmrCallDur

Duration of transmit path open from this peer to voice gateway for the call leg.

cmqVoIPCallActiveTxTmrActSpeechDur

Duration of speech transmitted from this peer to voice gateway for the call leg.

cmqVoIPCallActiveTxSignalLvl

The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.

cmqVoIPCallActiveTxNoiseFloor

The instantaneous noise floor level estimate if VAD is enabled.

cmqCommonCallActiveNRTable

This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.

cmqCommonCallActiveNREntry

An entry (conceptual row) in the cmqCommonCallActiveNRTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted w ...

cmqCommonCallActiveNRConnectionId

The global connection identifier for the active leg of the call.

cmqCommonCallActiveNRCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqCommonCallActiveNRCallType

This object indicates the call type of the active call leg. tdm(1): TDM call leg. voip (2): VoIP call leg.

cmqCommonCallActiveNREnabledMic

This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallActiveNREnabledEar

This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallActiveNRDirMic

This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallActiveNRDirEar

This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallActiveNRLibVer

The library version of noise reduction module being used.

cmqCommonCallActiveNRIntensity

The intensity of the noise reduction being applied to audio signals.

cmqCommonCallActivePreNRNoiseFloorEstMic

The estimated noise floor level before noise redunction is applied in the MIC direction.

cmqCommonCallActivePostNRNoiseFloorEstMic

The estimated noise floor level after noise redunction is applied in the MIC direction.

cmqCommonCallActivePreNRNoiseFloorEstEar

The estimated noise floor level before noise redunction is applied in the ear direction.

cmqCommonCallActivePostNRNoiseFloorEstEar

The estimated noise floor level after noise redunction is applied in the ear direction.

cmqCommonCallActiveASPTable

This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.

cmqCommonCallActiveASPEntry

An entry (conceptual row) in the cmqCommonCallActiveASPTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted ...

cmqCommonCallActiveASPConnectionId

The global connection identifier for the active leg of the call.

cmqCommonCallActiveASPCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqCommonCallActiveASPCallType

This object indicates the call type of the active call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.

cmqCommonCallActiveASPEnabledMic

This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallActiveASPEnabledEar

This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallActiveASPDirMic

This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallActiveASPDirEar

This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallActiveASPMode

The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.

cmqCommonCallActiveASPVer

The version of acoustic shock protection applied to the audio signal.

cmqCommonCallActiveNumSigASPTriggMic

The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.

cmqCommonCallActiveDurSigASPTriggMic

The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.

cmqCommonCallActiveTotNumASPTriggMic

The total number of acoustic shock protection triggers in the MIC direction.

cmqCommonCallActiveTotASPDurMic

The total duration of active acoustic shock protection suppression in milliseconds in the MIC direction.

cmqCommonCallActiveLoudestFreqEstForLongEpiMic

The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.

cmqCommonCallActiveLongestDurEpiMic

The duration of the longest acoustic shock protection episode in the MIC direction.

cmqCommonCallActiveNumSigASPTriggEar

The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.

cmqCommonCallActiveDurSigASPTriggEar

The cumulative duration of all significant aooustic shock protection triggers in the ear direction.

cmqCommonCallActiveTotNumASPTriggEar

The total number of acoustic shock protection triggers in the ear direction.

cmqCommonCallActiveTotASPDurEar

The total duration of active acoustic shock protection suppression in milliseconds in the ear direction.

cmqCommonCallActiveLoudestFreqEstForLongEpiEar

The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.

cmqCommonCallActiveLongestDurEpiEar

The duration of the longest acoustic shock protection episode in the ear direction.

cmqVoIPCallHistoryTable

This table is the VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.

cmqVoIPCallHistoryEntry

An entry (conceptual row) in the cmqVoIPCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is del ...

cmqVoIPCallHistoryConnectionId

The global connection identifier for the VoIP leg of the call.

cmqVoIPCallHistoryCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqVoIPCallHistoryRxCodecId

The codec type of the endpoint for the established voice path.

cmqVoIPCallHistoryRxSevConcealRatioPct

The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.

cmqVoIPCallHistoryRxCallConcealRatioPct

The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.

cmqVoIPCallHistoryRxPktLossRatioPct

The ratio of total effective received packet loss to the number of RTP packets expected.

cmqVoIPCallHistoryRxRoundTripTime

The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.

cmqVoIPCallHistoryRxCallDur

Duration of receive path open from this peer to voice gateway for the call leg.

cmqVoIPCallHistoryRxVoiceDur

Duration of speech received from this peer to voice gateway for the call leg.

cmqVoIPCallHistoryRxPktLossConcealDur

The sum of error predictive concealment and bad protocol concealment in milliseconds.

cmqVoIPCallHistoryRxPktCntExpected

The expected number of packets to be received.

cmqVoIPCallHistoryRxPktCntNotArrived

The expected number of packets minus the number of received packets.

cmqVoIPCallHistoryRxPktCntComfortNoise

The number of received comfort noise packets for the call leg.

cmqVoIPCallHistoryRxPktCntUnusableLate

The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.

cmqVoIPCallHistoryRxPktCntDiscarded

The sum of the number of late packets and the number of bad protocol packets.

cmqVoIPCallHistoryRxPktCntEffLoss

The total number of never-arrived packets and the number of discarded packets.

cmqVoIPCallHistoryRxUnimpairedSecOK

The cumulative number of seconds during which there was no concealment and is considered as OK seconds.

cmqVoIPCallHistoryRxConcealSec

The cumulative number of seconds during which there was some concealment.

cmqVoIPCallHistoryRxSevConcealSec

The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.

cmqVoIPCallHistoryRxJBufMode

The jitter buffer mode configured for the endpoint. adaptive(1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer is ...

cmqVoIPCallHistoryRxJBufNomDelay

The nominal jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallHistoryRxJBufDlyNow

The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.

cmqVoIPCallHistoryRxJBufLowWater

The minimum jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallHistoryRxJBuffHiWater

The maximum jitter buffer playout delay in milliseconds configured for the endpoint.

cmqVoIPCallHistory3550JShortTermAvg

The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.

cmqVoIPCallHistory3550JCallAvg

The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.

cmqVoIPCallHistoryRxSignalLvl

The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.

cmqVoIPCallHistoryRxPred107Rscore

The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPred107RMosListen

The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPred107RScoreConv

The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPred107RMosConv

Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPred107CodecIeBase

The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in killobits per second.

cmqVoIPCallHistoryRxPred107CodecBPL

The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.

cmqVoIPCallHistoryRxPred107DefaultR0

R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.

cmqVoIPCallHistoryRxPred107IeEff

Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec t ...

cmqVoIPCallHistoryRxPred107Idd

Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.

cmqVoIPCallHistoryRxPredMosLqoAvg

The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPredMosLqoRecent

The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPredMosLqoBaseline

The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPredMosLqoMin

The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPredMosLqoNumWin

A window in 8 seconds of frame loss data required to calculate the MOS estimate.

cmqVoIPCallHistoryRxPredMosLqoBursts

The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.

cmqVoIPCallHistoryRxPredMosLqoFrLoss

The average frame loss count since call start.

cmqVoIPCallHistoryRxPredMosLqoVerID

The MOS K-factor version ID, e.g. CVTQ v0.95

cmqVoIPCallHistoryTxCodecId

The codec type of the endpoint for the established voice path.

cmqVoIPCallHistoryTxVadEnabled

This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqVoIPCallHistoryTxTmrCallDur

Duration of transmit path open from this peer to voice gateway for the call leg.

cmqVoIPCallHistoryTxTmrActSpeechDur

Duration of speech transmitted from this peer to voice gateway for the call leg.

cmqVoIPCallHistoryTxSignalLvl

The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.

cmqVoIPCallHistoryTxNoiseFloor

The instantaneous noise floor level estimate if VAD is enabled.

cmqCommonCallHistoryNRTable

This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.

cmqCommonCallHistoryNREntry

An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is d ...

cmqCommonCallHistoryNRConnectionId

The global connection identifier for the history leg of the call.

cmqCommonCallHistoryNRCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqCommonCallHistoryNRCallType

This object indicates the call type of the history call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.

cmqCommonCallHistoryNREnabledMic

This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallHistoryNREnabledEar

This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallHistoryNRDirMic

This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallHistoryNRDirEar

This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallHistoryNRLibVer

The library version of noise reduction module being used.

cmqCommonCallHistoryNRIntensity

The intensity of the noise reduction being applied to audio signals.

cmqCommonCallHistoryPreNRNoiseFloorEstMic

The estimated noise floor level before noise redunction is applied in the MIC direction.

cmqCommonCallHistoryPostNRNoiseFloorEstMic

The estimated noise floor level after noise redunction is applied in the MIC direction.

cmqCommonCallHistoryPreNRNoiseFloorEstEar

The estimated noise floor level before noise redunction is applied in the ear direction.

cmqCommonCallHistoryPostNRNoiseFloorEstEar

The estimated noise floor level after noise redunction is applied in the ear direction.

cmqCommonCallHistoryASPTable

This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.

cmqCommonCallHistoryASPEntry

An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is d ...

cmqCommonCallHistoryASPConnectionId

The global connection identifier for the history leg of the call.

cmqCommonCallHistoryASPCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a referenc ...

cmqCommonCallHistoryASPCallType

This object indicates the call type of the history call leg. tdm (1): TDM call leg voip (2): VoIP call leg.

cmqCommonCallHistoryASPEnabledMic

This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallHistoryASPEnabledEar

This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.

cmqCommonCallHistoryASPDirMic

This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallHistoryASPDirEar

This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.

cmqCommonCallHistoryASPMode

The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.

cmqCommonCallHistoryASPVer

The version of acoutsic shock protection applied to audio signals.

cmqCommonCallHistoryNumSigASPTriggMic

The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.

cmqCommonCallHistoryDurSigASPTriggMic

The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.

cmqCommonCallHistoryTotNumASPTriggMic

The total number of acoustic shock protection triggers in the MIC direction.

cmqCommonCallHistoryTotASPDurMic

The total duration of acoustic shock protection suppression in milliseconds in the MIC direction.

cmqCommonCallHistoryLoudestFreqEstForLongEpiMic

The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.

cmqCommonCallHistoryLongestDurEpiMic

The duration of the longest acoustic shock protection episode in the MIC direction.

cmqCommonCallHistoryNumSigASPTriggEar

The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.

cmqCommonCallHistoryDurSigASPTriggEar

The cumulative duration of all significant aooustic shock protection triggers in the ear direction.

cmqCommonCallHistoryTotNumASPTriggEar

The total number of acoustic shock protection triggers in the ear direction.

cmqCommonCallHistoryTotASPDurEar

The total duration of acoustic shock protection suppression in milliseconds in the ear direction.

cmqCommonCallHistoryLoudestFreqEstForLongEpiEar

The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.

cmqCommonCallHistoryLongestDurEpiEar

The duration of the longest acoustic shock protection episode in the ear direction.

cmqVideoCallActiveTable

This table is the video extension to the call active table of DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.

cmqVideoCallActiveEntry

An entry (conceptual row) in the cmqVideoCallActiveTable. An entry is added to the table when the below conditions are met: 1. A call active entry in callActiveTable of the IETF Dial Control MIB with video callActiveInfoType is created. 2. An entry in c ...

cmqVideoCallActiveConnectionId

The global connection identifier for the video leg of the call.

cmqVideoCallActiveCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint.

cmqVideoCallActiveRxMOSInstant

Instantaneous aggregated MOS in the receive direction, where 0 is an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.

cmqVideoCallActiveRxCompressDegradeInstant

The percentage of quality loss (indicated by RX instantaneous MOS) due to the initial compression of video at an end point introduced by a video encoder.

cmqVideoCallActiveRxNetworkDegradeInstant

The percentage of quality loss (indicated by RX instantaneous MOS) due to network factors, such as jitter, delay and packet loss.

cmqVideoCallActiveRxTransscodeDegradeInstant

The percentage of quality loss (indicated by RX instantaneous MOS) due to the transcoding, including transrating, of a video stream.

cmqVideoCallActiveRxMOSAverage

Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.

cmqVideoCallActiveRxCompressDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.

cmqVideoCallActiveRxNetworkDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.

cmqVideoCallActiveRxTransscodeDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.

cmqVideoCallHistoryTable

This table is the video extension to the call history table of CISCO-DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.

cmqVideoCallHistoryEntry

An entry (conceptual row) in the cmqVideoCallHistoryTable. An entry is added to the table when the below conditions are met: 1. A call history entry in cCallHistoryTable of the Cisco Dial Control MIB with video cCallHistoryInfoType is created. 2. An ent ...

cmqVideoCallHistoryConnectionId

The global connection identifier for the video leg of the call.

cmqVideoCallHistoryCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint.

cmqVideoCallHistoryRxMOSAverage

Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.

cmqVideoCallHistoryRxCompressDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.

cmqVideoCallHistoryRxNetworkDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.

cmqVideoCallHistoryRxTransscodeDegradeAverage

The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.

cmqVoiceCallActiveGroup

The collection of objects that provide voice quality statistics for active voice calls.

cmqVoiceCallHistoryGroup

The collection of objects that provide voice quality statistics for history voice calls.

cmqVideoCallActiveGroup

The collection of objects that provide video quality statistics for active video calls.

cmqVideoCallHistoryGroup

The collection of objects that provide video quality statistics for history video calls.