CISCO-MGX82XX-PXM-CLOCK-MIB Download
The MIB module to describe the clock configuration
in Processor Switch Module(PXM) in MGX82xx product.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-MGX82XX-PXM-CLOCK-MIB
- pxmPrimaryMuxClockSource
- This object identifies the source of the Primary Mux Clock for PXM card.
- pxmPrimaryInbandClockSourceLineNumber
- This object indicates the inband line number. This is applicable when pxmPrimaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
- pxmPrimarySMClockSourceSlotNumber
- This object indicates the service module slot number. This is applicable when pxmPrimaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
- pxmSecondaryMuxClockSource
- This object identifies the source of the Secondary Mux Clock for PXM card.
- pxmSecondaryInbandClockSourceLineNumber
- This object indicates the inband line number. This is applicable when pxmSecondaryMuxClockSource is pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
- pxmSecondarySMClockSourceSlotNumber
- This object indicates the service module slot number. This is applicable when pxmSecondaryMuxClockSource is pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
- pxmCurrentClock
- This object represents the clock source currently selected for PXM card. primary(1): The primary clock source is described by pxmPrimaryMuxClockSource secondary(2): The secondary clock source is described by pxmSecondaryMuxClockSource. intOscillator(3): C ...
- pxmPreviousClock
- This object represents the clock source previously selected for PXM card.
- pxmExtClockPresent
- Status of External T1/E1 Clock on PXM card.
- pxmExtClkSrcImpedance
- Impedance on external clock input for PXM card.
- pxmExtClkConnectorType
- This object describes the type of connector available for connecting the external clock source to the PXM.
- pxmClkStratumLevel
- This object describes the lowest stratum level provided by the interface the external clock source to the PXM back card.
- pxmClkErrReason
- This object gives more information about clock status. The possible values are : goodClk(1) : Clock is good unkownReason(2) : reason not known noClkSignal(3) : Loss of signal(LOS) on clock source freqTooHigh(4) : frequency drifted too h ...
- pxmExtClock2Present
- This object indicates the status of external T1/E1 Clock on port 2 of PXMUI-S3 back card.
- pxmExtClk2SrcImpedance
- This object provides the impedance on external clock input on port 2 of PXMUI-S3 back card.
- pxmExtClk2ConnectorType
- This object describes the type of connector available for connecting the external clock source to the port 2 of PXM-UI-S3 back card of PXM.
- cmpClockInfoGroup
- The collection of objects which are used for providing information on PXM Clock configuration.
- cmpPrimaryClockInfoGroup
- The collection of objects which are used for providing information on Primary Clock configuration.
- cmpSecondaryClockInfoGroup
- The collection of objects which are used for providing information on Secondary Clock configuration.
- cmpExtClockInfoGroup
- The collection of objects which are used for providing general information on PXM Clock configuration.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
