CISCO-POP-MGMT-MIB Download

cpmDS0UsageTable

The DS0 usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects include analog calls coming over ISDN, Channelized T1, and Channelized E1. This table is created for every DS1 line in the device.

cpmDS0UsageEntry

An entry in the DS0 Usage table.

cpmDS1SlotIndex

The slot index indicates the slot number on the device where the DS1 card resides.

cpmDS1PortIndex

The port index indicates the port number of a specific DS1 on the DS1 card in the slot

cpmChannelIndex

The channel index that distinguishes the DS0 timeslot of the DS1 port. The range of the channel index is based on the number of T1/E1 channels: 1-24(T1) and 1-31(E1).

cpmConfiguredType

The configured technology for the channel: ISDN(2), Channelized T1 (3) or Channelized E1 (4).

cpmDS0CallType

The type of the current call carried by this DS0. idle - This DS0 is currently idle. unknown - The data type of the call currently occupying this DS0 is not one of the types listed here. analog - The data type of the call currently occupying this D ...

cpmL2Encapsulation

The data link encapsulation of the call currently occuppying this DS0: idle - This DS0 is currently idle. unknown - The encapsulation of the currently active call on this DS0 is not one of the options following. PPP - slip - arap - hdlc - ...

cpmCallCount

The number of calls that have occupied this DS0.

cpmTimeInUse

The amount of time that this DS0 has been in use. This is computed by summing up the call durations of all past calls that have occupied this DS0.

cpmInOctets

The total number of octets received on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the received 'raw' octets are counted, including any protocol headers which may or may not be present ...

cpmOutOctets

The total number of octets transmitted on this DS0 for data calls (cpmDS0CallType has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the transmitted 'raw' octets are counted, including any protocol headers which may or may not be p ...

cpmInPackets

The total number of packets received on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)').

cpmOutPackets

The total number of packets transmitted on this DS0 for data calls (cpmDS0CallTyp has the value 'analog(3)' or 'digital(4)' or 'v110(5)' or 'v120(6)').

cpmAssociatedInterface

This is the value of ifIndex when the specific channel has an active call with a corresponding interface in the ifTable. For example, a digital ISDN call has a value pointing to the B-Channel entry in the ifTable. A modem call over ISDN or CT1/CE1 has a ...

cpmISDNCfgBChanInUseForAnalog

The number of configured ISDN B-Channels that are currently occupied by analog calls.

cpmISDNCfgBChannelsInUse

The number of configured ISDN B-Channels that are currently occupied by both Digital and Analog calls.

cpmActiveDS0s

The number of DS0s that are currently in use.

cpmPPPCalls

The current number of active PPP calls received by the managed device

cpmV120Calls

The current number of active V.120 calls received by the managed device

cpmV110Calls

The current number of active V.110 calls received by the managed device

cpmActiveDS0sHighWaterMark

The high water mark for number of DS0s that are active simultaneously

cpmDS1DS0UsageTable

The DS1-DS0-usage table is for hardware and software objects not used as interfaces, and not covered in rfc1213. These objects provide information on timeslots usage for a particular DS1.

cpmDS1DS0UsageEntry

An entry in the DS0 Usage table.

cpmDS1UsageSlotIndex

The slot index indicates the slot number on the device where the DS1 card resides. The slot index of the first slot is starting from 0 and increment by 1 for the next slot in the device.

cpmDS1UsagePortIndex

The port index indicates the port number of a specific DS1 on the DS1 card in the slot. The port index of the first port is starting from 0 and increment by 1 for the next port on the DS1 card.

cpmDS1ActiveDS0s

The number of DS0s that are currently in use for a particular DS1.

cpmDS1ActiveDS0sHighWaterMark

The highest number of simultaneously actived DS0s on a specified DS1.

cpmDS1TotalAnalogCalls

The accumulated number of analog data calls (cpmDS0CallType has the value 'analog(3)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls.

cpmDS1TotalDigitalCalls

The accumulated number of digital data calls (cpmDS0CallType has the value 'digital(4)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls.

cpmDS1TotalV110Calls

The accumulated number of v.110 data calls (cpmDS0CallType has the value 'v110(5)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls.

cpmDS1TotalV120Calls

The accumulated number of v.120 data calls (cpmDS0CallType has the value 'v120(6)') on all ds0s within this DS1 since system startup. The object includes active and terminated calls.

cpmDS1TotalCalls

The total number of calls on all the DS0s within this DS1 since last system re-initialization. The object includes active and terminated calls. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channe ...

cpmDS1TotalTimeInUse

The total call duration on all the DS0s within this DS1 since last system re-initialization. This only includes DS0s configured as bearer channels, not those configured for signaling, such as PRI D-channel.

cpmDS1CurrentIdle

The total number of DS0s currently in idle state within this DS1. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. See cpmDS0OperStatus in the cpmDS0StatusTable for individual DS0s.

cpmDS1CurrentOutOfService

The total number of DS0s in this DS1 currently placed out of service. This only includes DS0s configured as bearer and CAS channels, not those configured for signaling, such as PRI D-channel. See cpmDS0OperStatus in the cpmDS0StatusTable for individual DS ...

cpmDS1CurrentBusyout

The total number of DS0s in this DS1 which currently have been requested to be busied out, but are not yet out of service. When an active call on a busied out DS0 terminates, the DS0 will be out of service, this object will be decremented and cpmDS1TotalO ...

cpmDS1InOctets

The total number of octets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInOctets objects in the cpmDS0UsageTable for this DS1.

cpmDS1OutOctets

The total number of octets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutOctets objects in the cpmDS0UsageTable for this DS1.

cpmDS1InPackets

The total number of data packets received over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmInPackets objects in the cpmDS0UsageTable for this DS1. It consists of PPP or PCM voice data ...

cpmDS1OutPackets

The total number of data packets transmitted over all the DS0 bearer channels within this DS1 since last system re-initialization. This value is a sum of all the cpmOutPackets objects in the cpmDS0UsageTable for this DS1. It consists of PPP or PCM voice d ...

cpmSW56CfgBChannelsInUse

The number of configured SW56 B-Channels that are currently occupied by Digital calls.

cpmISDNCfgBChanInUseForVoice

The number of configured ISDN B-Channels that are currently occupied by Voice calls.

cpmCASCfgBChanInUseForVoice

The number of configured CAS Channels that are currently occupied by Voice calls.

cpmISDNCfgActiveDChannels

The number of ISDN signaling channels which are active.

cpmISDNCfgBChannelsTimeInUse

The total call duration on all the ISDN B-channels since last system re-initialization.

cpmISDNCfgBChannelsTimeInUseAnlg

The total analog call duration on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType.

cpmISDNCfgBChannelCalls

The total number of calls on all the ISDN B-channels since last system re-initialization.

cpmISDNCfgBChannelAnalogCalls

The total number of analog calls on all the ISDN B-channels since last system re-initialization. Analog call type is identified in cpmDS0CallType.

cpmTotalISDNSyncPPPCalls

The total number of ISDN-sync PPP calls received by the managed device since last system re-initialization.

cpmDS0BusyoutNotifyEnable

This variable controls generation of cpmDS0BusyoutNotification. When this variable is 'true(1)', generation of cpmDS0BusyoutNotification is enabled. When this variable is 'false(2)', generation of cpmDS0BusyoutNotification is disabled. The default value ...

cpmISDNCallsRejected

The number of rejected ISDN calls in this managed device.

cpmModemCallsRejected

The number of rejected modem calls in this managed device.

cpmISDNCallsClearedAbnormally

The number of connected ISDN calls that have been abnormally cleared, that is, they were cleared by some event other than the following: a - The transmission of a normal disconnect message by the local end. b - The reception of a normal disconnect message ...

cpmModemCallsClearedAbnormally

The number of connected modem calls that have been abnormally cleared, that is, they were not cleared with the proper modem protocol handshakes.

cpmISDNNoResource

The number of ISDN calls that have been rejected because there is no B-Channel available to handle the call.

cpmModemNoResource

The number of modem calls that have been rejected because there is no modem available to handle the call.

cpmCallVolSuccISDNDigital

The number of incoming and outgoing successful ISDN digital data calls (cpmDS0CallType has the value 'digital(4)'), since system startup. A successful call is a terminated call that has a disconnect cause of 'normal call clearing(16)'.

cpmCallVolAnalogCallClearedNormally

The number of incoming and outgoing successful analog data calls which use modem resource (cpmDS0CallType has the value 'analog(3)'), since system startup. A successful call is a terminated call who is cleared by the proper modem protocol handshake.

cpmActiveCallSummaryTable

The active call summary table is needed to track currently active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB, and the DIAL-CONTROL_MIB is not yet available.

cpmActiveCallSummaryEntry

An entry in the Call Summary table.

cpmActiveCallStartTimeIndex

The start time of the current call.

cpmActiveCallSummaryIndex

Arbitrary small integer to distinguish calls that occured at the same time tick.

cpmActiveUserID

The User login ID or zero length string if unavailable.

cpmActiveUserIpAddr

The IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS.

cpmActiveCallType

The call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call

cpmActiveModemSlot

Identification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemPort uniquely identifies a modem. Value is -1 if call does not utilize a modem.

cpmActiveModemPort

Identification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmActiveModemSlot uniquely identifies a modem. Value is -1 if call does not utilize a modem.

cpmActiveCallDuration

The duration of the current call.

cpmActiveEntrySlot

The logical slot in which the DS1 line that the user connected on resides.

cpmActiveEntryPort

The logical port for the DS1 line that the user connected on.

cpmActiveEntryChannel

The channel within the DS1 that is allocated to the call.

cpmActiveRemotePhoneNumber

The remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero.

cpmActiveLocalPhoneNumber

The local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero.

cpmActiveTTYNumber

The TTY number associated with this call. This information comes from the IOS 'show line' command.

cpmCallHistorySummaryTableMaxLength

The upper limit on the number of entries that the cpmCallHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and the new one will be created.

cpmCallHistorySummaryRetainTimer

The minimum amount of time that an cpmCallHistoryEntry will be maintained before being deleted. A value of 0 will prevent any history from being retained, but will not prevent callCompletion traps being genarated.

cpmCallHistorySummaryTable

The call history summary table is needed to track ended active calls. This table is needed because modem calls are not in CALL-HISTORY-MIB; the CISCO-ISDN-MIB objects do not contain information about the active calls; and the DIAL-CONTROL_MIB is not yet ...

cpmCallHistorySummaryEntry

An entry in the Call Summary table.

cpmCallDisconnectTimeIndex

The disconnect time of the call.

cpmCallStartTimeIndex

The start time of the current call.

cpmCallHistorySummaryIndex

Arbitrary small integer to distinguish calls that occured at the same time tick.

cpmUserID

The User login ID or zero length string if unavailable. This object comes directly from IOS.

cpmUserIpAddr

The IP address of the call or 0.0.0.0 if unavailable. This object comes directly from IOS.

cpmCallType

The call type: unknown - None of the following analog - Modem call digital - Digital call v110 - V110 Call v120 - V120 Call voice - Voice Call

cpmModemSlot

Identification of modem resource allocated to call. This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemPort uniquely identifies a modem. Value is -1 if call does not utilize a modem.

cpmModemPort

Identification of modem resource allocated to call. This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB. This value along with cpmModemSlot uniquely identifies a modem. Value is -1 if call does not utilize a modem.

cpmCallDuration

The duration of the current call.

cpmEntrySlot

The physical system slot in which the DS1 line that the user connected on resides.

cpmEntryPort

The logical port for the DS1 line that the user connected on.

cpmEntryChannel

The channel within the DS1 that is allocated to the call.

cpmRemotePhoneNumber

The remote telephone number. For a call into the device, this is the originating number. For a call out of the device, this is the dialed number. If not available the string length is zero.

cpmLocalPhoneNumber

The local telephone number. For a call into the device, this is the dialed number. For a call out of the device, this is the originating number. If not available the string length is zero.

cpmTTYNumber

The TTY number associated with this call. This information comes from the IOS 'show line' command.

cpmDS1LoopbackNotifyEnable

This variable controls the generation of cpmDS1LoopbackNotification When this variable is 'true(1)', generation of these notification is enabled. When this variable is 'false(2)', generation is disabled The default value is 'false(2)'. ::= { cpmDS1Loopbac ...

cpmDS0UsageGroup

A collection of objects providing the analog and digital statistics for a DS1.

cpmCallFailureGroup

A collection of objects providing aggregate totals of call failures

cpmActiveCallSummaryGroup

A collection of objects providing the summary of the currently active calls.

cpmCallHistorySummaryGroup

A collection of objects providing the summary of calls that were recently terminated.

cpmDS0UsageGroupRev1

A collection of objects providing the analog and digital statistics for a DS1.

cpmDS0UsageGroupRev2

A collection of objects providing the analog and digital statistics for a DS1.

cpmDS1UsageGroup

A collection of objects providing statistics aggregation across DS0s within a DS1.

cpmSystemGroup

A collection of objects providing statistics aggregation for the entire system.

cpmDS0StatusGroup

A collection of objects providing the status for a DS0.

cpmDS1LoopbackNotifyConfigGroup

A collection of objects providing the notification configuration ::= { cpmMIBGroups 11 } OBJECTS { cpmCallVolSuccISDNDigital, cpmCallVolAnalogCallClearedNormally } STATUS current DESCRIPTION A collection of objects providing aggregate totals of call succe ...