CISCO-PREFERRED-PATH-MIB Download
The MIB module for the management of
preferred path. This MIB enables managers
to configure and monitor Preferred Path
parameters.
Preferred path provides a method of routing
traffic over the selected paths, not necessarily
the preferred shortest path as chosen by routing
protocols such as FSPF. This kind of control allows
users to choose shortest paths based on
characteristics, such as frames received on a
selected interface or frames with selected source
FC-ID. This feature allows users to ensure paths
seperation between switches for different traffic
between a host and a target.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-PREFERRED-PATH-MIB
- cPrefPathRouteMapTable
- This table allows users to configure and monitor the preferred path fcroute-map parameters on all the VSANs configured on the local switch. A fcroute-map can be created per VSAN. For each fcroute-map users can create multiple routes which are identified b ...
- cPrefPathRouteMapEntry
- A conceptual row in the cPrefPathRouteMapTable. There is an entry in this table for each route within a fcroute-map.
- cPrefPathRouteMapVsanIndex
- The VSAN ID of this fcroute-map.
- cPrefPathRouteMapRouteIndex
- An arbitrary integer value which identifies a route in this fcroute-map.
- cPrefPathRouteMapIntfPrefStrict
- This object allows to change the way the preferred path selection logic would select the preferred path. Setting this object to 'true' will make the preferred path to select the outgoing interface strictly based on the preference set using the cPrefPathRM ...
- cPrefPathRouteMapRouteActive
- This object allows to activate/de-activate the route within a fcroute-map. If value of this object is set to 'true', then route will be activated. If set to 'false', then the route will be de-activated. After the route is activated, any incremental update ...
- cPrefPathRouteMapActive
- This object allows to activate/de-activate all the routes within a fcroute-map. If value of this object is set to 'true', then all the routes within this fcroute-map will be activated. If set to 'false', then all routes within this fcroute-map will be de- ...
- cPrefPathRouteMapStorageType
- The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
- cPrefPathRouteMapRowStatus
- The status of this conceptual row. There is no need to configure instances of other corresponding columnar objects in order to make the newly created row to active. Instances of all other corresponding columns can be modified for an active row.
- cPrefPathRouteMapGlobalTable
- This table allows users to configure and monitor the preferred path fcroute-map global parameters. Entries in this table are automatically created when the first route in a fcroute-map is created using the cPrefPathRouteMapTable table. An entry is deleted ...
- cPrefPathRouteMapGlobalEntry
- A row in the cPrefPathRouteMapGlobalTable table. There is an entry in this table for each fcroute-map created.
- cPrefPathRouteMapGlobalActive
- This object allows to activate/de-activate all the routes within a fcroute-map. This object is read-write for the values of 'all' and 'none', but cannot be set to 'partial'. If this object is set to 'all', then all the routes within this fcroute-map will ...
- cPrefPathRouteMapMatchTable
- This table allows to configure and monitor the match criteria for a route within a fcroute-map created using the cPrefPathRouteMapTable table. Each match criteria allows user to classify a traffic flow based on the the incoming frame's source FC-ID and de ...
- cPrefPathRouteMapMatchEntry
- An entry (conceptual row) in this table. There is an entry in this table for each match criteria of a route within a fcroute-map.
- cPrefPathRMapMatchSrcAddr
- The FC-ID which need to be matched with source address in a frame for the flow classification.
- cPrefPathRMapMatchSrcAddrMask
- This object represents the mask associated with the source address represented by cPrefPathRMapMatchSrcAddr. The value of this object is meaningful only if the corresponding instance of cPrefPathRMapMatchSrcAddr contains a valid FC-ID.
- cPrefPathRMapMatchSrcIntf
- This object represents an interface on the local device on which a frame should arrive for flow classification. The value of 0 indicates that source interface match is not selected.
- cPrefPathRMapMatchDstAddr
- The FC-ID which need to be matched with destination address in a frame for flow classification.
- cPrefPathRMapMatchDstAddrMask
- This object represents the mask associated with the destination address represented by cPrefPathRMapMatchDstAddr. The value of this object is meaningful only if the corresponding instance of cPrefPathRMapMatchDstAddr contains a valid FC-ID.
- cPrefPathRMapMatchRowStatus
- The status of this conceptual row. There is no need to configure instances of other corresponding columnar objects in order to make the newly created row to active. Instances of all other corresponding columns can be modified for an active row.
- cPrefPathRouteMapSetTable
- This table allows to configure and monitor the set criteria for a route within a fcroute-map created using the cPrefPathRouteMapTable table. Each set criteria allows user to setup an action on the classified or matched traffic flow created using the cPref ...
- cPrefPathRouteMapSetEntry
- An entry (conceptual row) in this table. There is an entry in this table for each set criteria of a route within a fcroute-map.
- cPrefPathRMapSetIntfPref
- Preference level, which indicates the metric or cost, associated with the cPrefPathRMapSetIntf outgoing interface. The lower the number the higher the preference.
- cPrefPathRMapSetIntf
- This object represents an interface on the local device on which the matched or classified frame will be forwarded.
- cPrefPathRMapSetIvrNextHopVsanId
- This object represents the IVR next hop VSAN ID.
- cPrefPathRMapSetRowStatus
- The status of this conceptual row. It is required to configure instances of cPrefPathRMapSetIntf column before or concurrently in order to make the newly created row to active. Instances of all other corresponding columns can be modified for an active row ...
- cPrefPathRouteMapInfoTable
- This table contains information of the 'preferred path' that is currently active and selected for a route within a fcroute-map. The 'preferred path' is the selected preference level, and its associated interface which will be the outgoing interface for tr ...
- cPrefPathRouteMapInfoEntry
- An entry which contains information about the preferred path of a route within a fcroute-map.
- cPrefPathRMapSelectedPref
- The selected preference level.
- cPrefPathRMapSelectedIntf
- This object represents an interface on the local device which is selected to forward the classified or matched flow.
- cPrefPathRMapSelIvrNextHopVsanId
- This object represents the IVR next hop VSAN ID.
- cPrefPathRouteMapMatchInfoTable
- This table allows to monitor the status of the the match criteria of the route within a fcroute-map that are activated using the cPrefPathRouteMapGlobalActive or cPrefPathRouteMapRouteActive objects. Each match criteria entry in this table is indexed by - ...
- cPrefPathRouteMapMatchInfoEntry
- An entry which contains information about the match criteria of an 'active' route within a fcroute-map.
- cPrefPathRMapMatchStatus
- The status of the indexed match entry.
- cPrefPathRouteMapSetInfoTable
- This table allows to monitor the status of the the set criteria of the route within a fcroute-map that are activated using the cPrefPathRouteMapGlobalActive or cPrefPathRouteMapRouteActive objects. Each entry in this table is indexed by - cPrefPathRouteMa ...
- cPrefPathRouteMapSetInfoEntry
- An entry which contains information about the set criteria of an 'active' route within a fcroute-map.
- cPrefPathRouteMapSetInfoIntf
- This object represents an interface on the local device on which the matched or classified frame will be forwarded.
- cPrefPathRouteMapSetInfoIvrNextHopVId
- This object represents the IVR next hop VSAN ID.
- cPrefPathRouteMapSetStatus
- The status of the indexed set entry.
- cPrefPathHwFailureNotifEnable
- This variable indicates whether the system produces the ciscoPrefPathHWFailureNotify. A 'false' value for this object will prevent ciscoPrefPathHWFailureNotify notification being generated by the device.
- ciscoPrefPathConfigGroup
- A collection of objects for configuring and displaying Preferred Path parameters.
- ciscoPrefPathInfoGroup
- A collection of objects for providing information for preferred path notifications.
- ciscoPrefPathNotifyConfigGroup
- A collection of objects for displaying and configuring preferred path notifications.
- ciscoPrefPathConfigGroupRev1
- A collection of objects for configuring and displaying Preferred Path parameters.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
