CISCO-RHINO-MIB Download

ciscoLS1010ChassisSysType

The chassis system type.

ciscoLS1010ChassisBkplType

The chassis backplane type.

ciscoLS1010ChassisPs0Type

Type of power supply number 1.

ciscoLS1010ChassisPs0AdminStatus

Enable or disable power supply 1.

ciscoLS1010ChassisPs0Status

Status of power supply number 1.

ciscoLS1010ChassisPs0Led

LED Status of power supply number 1.

ciscoLS1010ChassisPs1Type

Type of power supply number 2.

ciscoLS1010ChassisPs1AdminStatus

Enable or disable power supply 2.

ciscoLS1010ChassisPs1Status

Status of power supply number 2.

ciscoLS1010ChassisPs1Led

LED Status of power supply number 2.

ciscoLS1010ChassisFanStatus

Status of the chassis fan.

ciscoLS1010ChassisFanLed

LED Status of fan.

ciscoLS1010ChassisCardStatusLed

LED Status of CPU card.

ciscoLS1010ChassisEnetLinkLed

Ethernet link status LED of CPU card.

ciscoLS1010Chassis12VoltStatus

The chassis 12V status.

ciscoLS1010ChassisTempStatus

The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temperature. C6400 will never report overTemperature(2) status. In C6400 there are two temperature sensors: core and inlet. C6400 us ...

ciscoLS1010ChassisPcmciaSlot0Type

Type of PCMCIA slot 0 type.

ciscoLS1010ChassisPcmciaSlot1Type

Type of PCMCIA slot 1 type.

ciscoLS1010ChassisNumSlots

The number of slots in the chassis for plug-in modules.

ciscoLS1010ChassisLastChange

The last time chassis physical content get changed.

ciscoLS1010ChassisFailureAction

which includes either power supply, voltage, temperature and fan failure.

ciscoLS1010ChassisChangeAction

which includes either power supply, fan and boards.

ciscoLS1010ChassisClockingMode

the mode is non-revertive, which means that the clock will stick to the current priority, even though higher priority clock is available.

ciscols1010SystemClockSourceStatus

The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerunning(system) is selected as network clock source.

ciscols1010SystemClockSourcePriority

The highest priority at which 'system' is configured as a network clock source.

ciscoLS1010ChassisInletTempStatus

inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to represent the core temperature.

ciscoLS1010ModuleTable

given by the value of ciscoLS1010ChassisNumSlots.

ciscoLS1010ModuleEntry

slot of the chassis.

ciscoLS1010ModuleIndex

A unique value for each module.

ciscoLS1010ModuleType

The type of module.

ciscoLS1010ModuleSerialNumber

Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric numbering scheme.

ciscoLS1010ModuleHwVersion

The hardware version of the module.

ciscoLS1010ModuleSwVersion

The software version number.

ciscoLS1010ModuleDescr

to describe the module.

ciscoLS1010ModuleNumSubModules

The max number of sub-modules supported by this module.

ciscoLS1010ModuleAdminStatus

ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the module's control logic enable: enable the module disable: disable the module Setting this object to any other values results in an error.

ciscoLS1010ModuleOperStatus

Operational status of the module.

ciscoLS1010ModuleHwVersionMinor

The minor hardware version of the module.

ciscoLS1010ModuleSerialNumberString

The serial number of the module.

ciscoLS1010SubModuleTable

given by the value of ciscoLS1010SlotNumSubModules.

ciscoLS1010SubModuleEntry

sub-slot of the module.

ciscoLS1010SubModuleIndex

This value is determined by sub-slot number where the sub-module is inserted.

ciscoLS1010SubModuleType

The type of sub-module.

ciscoLS1010SubModuleSerialNumber

Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphanumeric numbering scheme.

ciscoLS1010SubModuleHwVersion

Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-module.

ciscoLS1010SubModuleSwVersion

The software version number.

ciscoLS1010SubModuleDescr

to describe the module.

ciscoLS1010SubModuleNumPorts

this sub-module.

ciscoLS1010SubModuleAdminStatus

This object can be read/written as reset or ok.

ciscoLS1010SubModuleHwVersionMinor

Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module.

ciscoLS1010SubModuleOperStatus

Operational status of the submodule.

ciscoLS1010SubModuleSerialNumberString

The serial number of the sub-module.

ciscoLS1010PortTable

determined by the number of modules in the chassis, the number of sub-module in the module and the number of ports on each sub-module.

ciscoLS1010PortEntry

a sub-module.

ciscoLS1010PortIndex

a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module.

ciscoLS1010PortIfIndex

The ifIndex value assigned to this port.

clsEnetPortTable

is mainly to support ethernet port only.

clsEnetPortEntry

ethernet port.

clsEnetPortDuplex

in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined.

clsEnetPortAdminSpeed

in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree with the far end on port speed, the port will be in auto(2) mode, which will force the port to transmit in speed whichever is lower. Unknow ...

clsEnetPortType

interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that the port is not present.

clsEnetPortLinkStatus

of the port came up. autoNegotiate(2) -- the port will try to negotiate the link with the partner port. If successful, the link will come up, otherwise the link will remain down. forceUp(3) -- the port will force the link up irrespective of its partner po ...

clsPortLedTable

A list of LED entries associated with a port.

clsPortLedEntry

LED associated with a particular port which is identified by ifIndex.

clsPortLedIndex

among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of the LED, and is in ascending order from top to bottom, left to right.

clsPortLedType

Indicates the type or label of the LED.

clsPortLedStatus

Unknown(1) indicates either the LED status is not supported or the status is none of the defined.

ciscoAtmCpuAdminStatus

Reset will reload the CPU board.

ciscoAtmSwitchTotalBuffer

The total cell buffer count in switch's shared memory.

ciscoAtmSwitchFreeBuffer

The free cell buffer count in switch's shared memory.

ciscoAtmSwitchDiscardCells

The total discarded cells of the switch.

ciscoAtmSwitchInvalidCells

The total invalid cells of the switch.

ciscoAtmSwitchInvalidCellHeaderTable

A list of invalid cell header entries.

ciscoAtmSwitchInvalidCellHeaderEntry

a entry of invalid cell header.

ciscoAtmSwitchInvalidCellHeaderIndex

entry in the table.

ciscoAtmSwitchInvalidCellHeader

octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VCI.

ciscoAtmCpuTerminateOamFlow

Terminate all the incoming OAM cells to the CPU port.

ciscoAtmInterceptEndToEndOamFlow

cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including those on transit connections, are sent to the switch CPU. This value may be modified at any time. The modified value will apply to all existing con ...

ciscoLS1010ChassisMIBGroup

A collection of objects providing rhino chassis information

ciscoLS1010ChassisMIBObsoleteGroup

A collection of objects providing rhino chassis information which are obsolete.

ciscoLS1010ChassisMIBRev1Group

A collection of objects useful for reporting the hardware version of sub-modules in the chassis.

ciscoLS1010ChassisMIBClockingGroup

A collection of objects useful for managing clocking.

ciscoLS1010ChassisMIBGroup1

A collection of objects for managing the LS1010 chassis.

clsEnetPortGroup1

A collection of objects for managing ethernet ports.

clsPortLedGroup1

A collection of objects for showing port LEDs.

clsOperStatusGroup

A collection of objects for displaying operational status of modules and sub-modules in the chassis.

clsInletTempGroup

A collection of objects for reporting inlet temperature.

ciscoLS1010ChassisMIBGroup2

A collection of objects for managing the LS1010 chassis.

ciscoLS1010ChassisMIBDeprecatedGroup

A collection of objects providing rhino chassis information which are obsolete.