CISCO-RPMS-MIB

CISCO-RPMS-MIB Download

MIBs list

This MIB contains objects pertinent to a Resource Policy Management System (RPMS) server. RPMS is a key component of Cisco Any Service Any Port (ASAP) solution and provides the ability to dynamically share resources across network access servers (NAS). RPMS enables enforcement of Service Level Agreements(SLA) between wholesale providers and their customers. Such SLA enforcement is done at call pre-authentication stage. An SLA is conceptually a set of clauses (limits) that dictate how voice, dial and/or virtual private data network (VPDN) services will be provided by the wholesaler.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-RPMS-MIB

crpmsSubsystemTable
This table contains currently working RPMS subsystems. Each row contains the name of the subsystem and its uptime since last initialization.
crpmsSubsystemEntry
A subsystem entry contains information of a RPMS subsystem. At the system startup, if a subsystem fails to initialize itself, it will not appear in this table. If a subsystem becomes unavailable, its corresponding row will be removed from this table.
crpmsSubsystemIndex
An unique value, greater than zero, for each subsystem. It is recommended that values are assigned contiguously starting from 1.
crpmsSubsystemName
The name of the subsystem entry.
crpmsSubsystemUptime
The time (in hundredths of a second) since the subsystem was last (re)initialized.
crpmsCpTable
The customer profile table contains information about all SLAs hosted on an SLA Server.
crpmsCpEntry
A customer profile (Cp) entry contains information about a specific customer. A customer profile is a set of limits associated with a customer. These limits control how RPMS will respond to an incoming call under various scenarios.
crpmsCpName
The name of the customer profile. This name uniquely identifies the customer profile in the RPMS system.
crpmsCpLimit
The maximum number of concurrent calls allowed in this customer profile. Once this limit is exceeded, RPMS will reject any new calls unless an overflow limit (crpmsCpOverflowLimit) is configured for this customer.
crpmsCpOverflowLimit
The maximum number of calls allowed after the customer profile limit(crpmsCpLimit) has been reached. Such calls are termed overflow calls.
crpmsCpActiveCalls
Number of current active calls for this customer profile.
crpmsCpActiveOverflowCalls
Number of current active overflow calls for this customer profile.
crpmsCpAttemptedCalls
Total number of attempted calls (both successful and failed) for this customer profile.
crpmsCpAttemptedOverflowCalls
Number of attempted overflow calls (both successful and failed) for this customer profile.
crpmsCpRejections
Total number of rejected calls for this customer profile (crpmsCpOverflowRejections plus rejections due to unavailable resources).
crpmsCpOverflowRejections
Number of rejected overflow calls for this customer profile.
crpmsCpLimitThreshold
A threshold defined for the customer profile limit (crpmsCpLimit). It represents the percentage of the limit which, when crossed triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more de ...
crpmsVpdnGroupTable
A VPDN group manages a number of sessions. A VPDN session may use a MLP link, which is contained within a particular MLP bundle. A VPDN group has a limit of maximal sessions, the number of bundles that this VPDN group can allocate, and the number of links ...
crpmsVpdnGroupEntry
A VPDN group entry contains information about a specific VPDN group. VPDN groups contain the necessary setting to establish a VPDN session (tunneling protocol, home gateway information, and other data) as well as limits on various parameters (maximum conc ...
crpmsVpdnGroupName
The name of the VPDN group. This name uniquely identifies a VPDN group in the RPMS system.
crpmsVpdnTunnelId
The tunnel Id of the VPDN group. For Cisco IOS 12.05T and later, the tunnel id matches the remote name configured on the HGW router. The following is an example: vpdn-group 1 accept dialin l2tp virtual-template 1 remote isp1 local name hg For old Cisco IO ...
crpmsVpdnOverflowLimit
Limit of the overflow pool for this VPDN group.
crpmsVpdnMlpBundleLimit
Limit of MLP (multilink protocol) bundles for this VPDN group.
crpmsVpdnLinksPerBundleLimit
Limit of links per bundle for this VPDN group.
crpmsVpdnBundles
The number of active MLP bundles in the tunnel of the VPDN group.
crpmsVpdnActiveCalls
The number of active calls that belong to this VPDN group.
crpmsVpdnActiveOverflowCalls
The number of active overflow calls that belong to this VPDN group.
crpmsVpdnRejections
The number of calls rejected because one of the group limits (crpmsVpdnOverflowLimit, crpmsVpdnMlpBundleLimit and crpmsVpdnLinksPerBundleLimit) was exceeded.
crpmsVpdnSizeRejections
The number of rejected calls of the VPDN group, because the max allowed size limit (crpmsVpdnOverflowLimit + crpmsVpdnLimit) was exceeded.
crpmsVpdnLimitThreshold
A threshold defined for the vpdn group limit (crpmsVpdnLimit) which, when crossed, triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be excee ...
crpmsVpdnGroupCpTable
A VPDN group can be associated with a number of customer profiles, this table represents this relationship. It's double indexed by index of crpmsVpdnGroupTable and index of crpmsCpTable. If rows are added to or removed from one of two tables, Its correspo ...
crpmsVpdnGroupCpEntry
A VPDN group customer profile entry contains information of SLA associated with this VPDN group.
crpmsVpdnGroupCpVpdnGroupName
The name of VPDN groups in the table.
crpmsVpdnGroupCpCpName
The name of customer profile in the table.
crpmsVpdnGroupCpEntryStatus
Used to create, delete or modify this row. None of the columnar objects can be modified except this one, when the row is active.
crpmsAlarmObject
The object identifier of the destination object related to the notification. For example, if crpmsCpLimitThreshold is crossed, this variable should have the OID of crpmsCpLimit.
crpmsAlarmValue
The current value that caused the threshold alarm to be sent.
crpmsAlarmThresholdObject
The object identifier of the Threshold that is related to the notification. For example, if crpmsCpLimitThreshold is crossed, this variable should have the OID of crpmsCpLimitThreshold.
crpmsSystemGroup
This group contains a table providing the general system level information.
crpmsCpGroup
This group contains a table providing the information of customer profile.
crpmsVpdnGroup
This group contains tables providing the information of VPDN.
crpmsNotifGroup
This group contains helper objects specifying notifications.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list