CISCO-SDSL-LINE-MIB Download

cSdslLineTable

This table contains the enterprise-specific common attributes describing both ends of SDSL lines supported by the system.

cSdslLineEntry

A set of enterprise-specific common attributes describing both ends of an SDSL line supported by the system. There exists an entry for each ifEntry with an ifType of sdsl(96).

cSdslLineCoding

Specifies encoding of signal used by this line. Other types may be added in the future.

cSdslLineFraming

This object specifies the current Transmission Convergence framing structure being used by the interface.

cSdslLineSpecific

This object specifies an object identifier of an instance of an object in the MIB. The implementation determines the application of this object. For example, an implementation may use this object to provide a reference to the port-class physical entity ...

cSdslLineConfProfile

This object specifies the row in the adslLineConfProfileTable (see the ADSL-LINE-MIB for further details), which applies for this SDSL line interface. In the case the implementation utilizes 'dynamic mode' (see the ADSL-LINE-MIB for further details), then ...

cSdslLineAlarmConfProfile

This object specifies the row in the adslLineAlarmConfProfileTable (see the ADSL-LINE-MIB for further details), which applies for this SDSL line interface. In the case the implementation utilizes 'dynamic mode' (see the ADSL-LINE-MIB for further details), ...

cSdslStucPhysTable

This table contains enterprise-specific physical layer parameters for STU-C class devices supported by the system.

cSdslStucPhysEntry

A set of enterprise-specific physical-layer parameters for an STU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of sdsl(96).

cSdslStucInvSerialNumber

This object specifies the vendor specific string that identifies the vendor STU-C.

cSdslStucInvVendorId

This object specifies the vendor identifier assigned according to T1.220

cSdslStucInvVersionNumber

This object specifies the vendor specific version number of the STU-C.

cSdslStucState

This object specifies the state of the STU-C transceiver.

cSdslStucDefect

This object specifies any possible defects currently being exhibited by the STU-C. This object has the intention of supplementing ifOperStatus.

cSdslStucCurrRate

This object specifies the rate the STU-C transceiver was able to obtain following training.

cSdslStucCurrSnrMgn

This object specifies the SNR margin as seen by this STU-C with respect to its received signal.

cSdslStucCurrGain

This object specifies gain applied to this STU-C's receiver. This object is deprecated by cSdslStucCurrGainRev which has no specified range.

cSdslStucCurrOutputPwr

This object specifies the measured total output power transmitted by this STU-C. This is the measurement that was reported during the last activation sequence.

cSdslStucCurrAtn

Measured difference in the total power transmitted by the peer STU-R and the total power received by this STU-C.

cSdslStucCurrGainRev

This object specifies gain applied to this STU-C's receiver. This object deprecates cSdslStucCurrGainRev and has no specified range.

cSdslSturPhysTable

This table contains enterprise-specific physical layer parameters for STU-R class devices supported by the system. -- Note to implementor: -- If the implementation does not support remote management -- of STU-R class devices, then the agent ...

cSdslSturPhysEntry

A set of enterprise-specific physical-layer parameters for an STU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of sdsl(96).

cSdslSturInvSerialNumber

This object specifies the vendor specific string that identifies the vendor STU-R.

cSdslSturInvVendorId

This object specifies the vendor identifier assigned according to T1.220

cSdslSturInvVersionNumber

This object specifies the vendor specific version number of the STU-R.

cSdslSturState

This object specifies the state of the STU-R transceiver.

cSdslSturDefect

This object specifies any possible defects currently being exhibited by the STU-R. This object has the intention of supplementing ifOperStatus.

cSdslSturCurrRate

This object specifies the rate the STU-R transceiver was able to obtain following training.

cSdslSturCurrSnrMgn

This object specifies the SNR margin as seen by this STU-R with respect to its received signal.

cSdslSturCurrGain

This object specifies gain applied to this STU-R's receiver. This object is deprecated by cSdslSturCurrGainRev which has no specified range.

cSdslSturCurrOutputPwr

This object specifies the measured total output power transmitted by this STU-R. This is the measurement that was reported during the last activation sequence.

cSdslSturCurrAtn

Measured difference in the total power transmitted by the peer STU-C and the total power received by this STU-R

cSdslSturCurrGainRev

This object specifies gain applied to this STU-R's receiver. This object deprecates by cSdslSturCurrGain and has no specified range.

cSdslStucPerfDataTable

This table contains physical-layer statistics for STU-C class devices supported by the system.

cSdslStucPerfDataEntry

A set of physical-layer statistics for an STU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of sdsl(96).

cSdslStucPerfLOSs

This object specifies the number of LOS failures experienced by the STU-C since agent reset.

cSdslStucPerfLOSQs

This object specifies the number of LOSQ failures experienced by the STU-C since agent reset.

cSdslStucPerfCVs

This object specifies the number of coding violations experienced by the STU-C since agent reset.

cSdslStucPerfESs

This object specifies the number of errored seconds experienced by the STU-C since agent reset.

cSdslStucPerfSESs

This object specifies the number of severely errored seconds experienced by the STU-C since agent reset.

cSdslStucPerfUASs

This object specifies the number of unavailable seconds experienced by the STU-C since agent reset.

cSdslStucPerfInits

This object specifies the number of line initializations attempted by the STU-C since agent reset. This value includes both successful and failed attempts.

cSdslStucUnavailRsrcs

This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space.

cSdslStucPerfValidIntervals

The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since ...

cSdslStucPerfInvalidIntervals

The number of near-end performance data 15-minute intervals in the range from 0 to cSdslStucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in ...

cSdslStucPerfCurr15MinTimeElapse

The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum ...

cSdslStucPerfCurr15MinLOSs

This object specifies the number of seconds in the current 15-minute interval when the STU-C experienced LOS.

cSdslStucPerfCurr15MinLOSQs

This object specifies the number of seconds in the current 15-minute interval when the STU-C experienced LOSQ.

cSdslStucPerfCurr15MinCVs

This object specifies the number of coding violations experienced by the STU-C in the current 15-minute interval.

cSdslStucPerfCurr15MinESs

This object specifies the number of errored seconds experienced by the STU-C in the current 15-minute interval.

cSdslStucPerfCurr15MinSESs

This object specifies the number of severely errored seconds experienced by the STU-C in the current 15-minute interval.

cSdslStucPerfCurr15MinUASs

This object specifies the number of unavailable seconds experienced by the STU-C in the current 15-minute interval.

cSdslStucPerfCurr15MinInits

This object specifies the number of line initializations attempted by the STU-C in the current 15-minute interval.

cSdslStucPerfCurr15MinUnavlRsrcs

This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the current 15 minute interval.

cSdslStucPerfCurr1DayTimeElapsed

The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum ...

cSdslStucPerfCurr1DayLOSs

This object specifies the number of seconds experienced by the STU-C in the current 1-day interval when there was LOS.

cSdslStucPerfCurr1DayLOSQs

This object specifies the number of seconds experienced by the STU-C in the current 1-day interval when there was LOSQ.

cSdslStucPerfCurr1DayCVs

This object specifies the number of coding violations experienced by the STU-C in the current 1-day interval.

cSdslStucPerfCurr1DayESs

This object specifies the number of errored seconds experienced by the STU-C in the current 1-day interval.

cSdslStucPerfCurr1DaySESs

This object specifies the number of severely errored seconds experienced by the STU-C in the current 1-day interval.

cSdslStucPerfCurr1DayUASs

This object specifies the number of unavailable seconds experienced by the STU-C in the current 1-day interval.

cSdslStucPerfCurr1DayInits

This object specifies the number of line initializations attempted by the STU-C in the current 1-day interval.

cSdslStucPerfCurr1DayUnavlRsrcs

This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the current 1-day interval.

cSdslStucPerfPrev1DayMoniSecs

The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected fo ...

cSdslStucPerfPrev1DayLOSs

This object specifies the number of seconds in the current 1-day interval when the STU-C experienced LOS.

cSdslStucPerfPrev1DayLOSQs

This object specifies the number of seconds in the previous 1-day interval when the STU-C experienced LOSQ.

cSdslStucPerfPrev1DayCVs

This object specifies the number of coding violations experienced by the STU-C in the previous 1-day interval.

cSdslStucPerfPrev1DayESs

This object specifies the number of errored seconds experienced by the STU-C in the previous 1-day interval.

cSdslStucPerfPrev1DaySESs

This object specifies the number of severely errored seconds experienced by the STU-C in the previous 1-day interval.

cSdslStucPerfPrev1DayUASs

This object specifies the number of unavailable seconds experienced by the STU-C in the previous 1-day interval.

cSdslStucPerfPrev1DayInits

This object specifies the number of line initializations attempted by the STU-C in the previous 1-day interval.

cSdslStucPerfPrev1DayUnavlRsrcs

This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the previous 1-day interval.

cSdslSturPerfDataTable

This table contains physical-layer statistics for STU-R class devices supported by the system. -- Note to implementor: -- If the implementation does not support remote management -- of STU-R class devices, then the agent must respond with - ...

cSdslSturPerfDataEntry

A set of physical-layer statistics for an STU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of sdsl(96).

cSdslSturPerfLOSs

This object specifies the number of LOS failures experienced by the STU-R since agent reset.

cSdslSturPerfLOSQs

This object specifies the number of LOSQ failures experienced by the STU-R since agent reset.

cSdslSturPerfCVs

This object specifies the number of coding violations experienced by the STU-R since agent reset.

cSdslSturPerfESs

This object specifies the number of errored seconds experienced by the STU-R since agent reset.

cSdslSturPerfSESs

This object specifies the number of severely errored seconds experienced by the STU-R since agent reset.

cSdslSturPerfUASs

This object specifies the number of unavailable seconds experienced by the STU-R since agent reset.

cSdslSturPerfValidIntervals

The number of previous far end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since t ...

cSdslSturPerfInvalidIntervals

The number of far-end performance data 15-minute intervals in the range from 0 to cSdslSturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in ...

cSdslSturPerfCurr15MinTimeElapse

The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum ...

cSdslSturPerfCurr15MinLOSs

This object specifies the number of seconds in the current 15-minute interval when the STU-R experienced LOS.

cSdslSturPerfCurr15MinLOSQs

This object specifies the number of seconds in the current 15-minute interval when the STU-R experienced LOSQ.

cSdslSturPerfCurr15MinCVs

This object specifies the number of coding violations experienced by the STU-R in the current 15-minute interval.

cSdslSturPerfCurr15MinESs

This object specifies the number of errored seconds experienced by the STU-R in the current 15-minute interval.

cSdslSturPerfCurr15MinSESs

This object specifies the number of severely errored seconds experienced by the STU-R in the current 15-minute interval.

cSdslSturPerfCurr15MinUASs

This object specifies the number of unavailable seconds experienced by the STU-R in the current 15-minute interval.

cSdslSturPerfCurr1DayTimeElapsed

The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum ...

cSdslSturPerfCurr1DayLOSs

This object specifies the number of seconds experienced by the STU-R in the current 1-day interval when there was LOS.

cSdslSturPerfCurr1DayLOSQs

This object specifies the number of seconds experienced by the STU-R in the current 1-day interval when there was LOSQ.

cSdslSturPerfCurr1DayCVs

This object specifies the number of coding violations experienced by the STU-R in the current 1-day interval.

cSdslSturPerfCurr1DayESs

This object specifies the number of errored seconds experienced by the STU-R in the current 1-day interval.

cSdslSturPerfCurr1DaySESs

This object specifies the number of severely errored seconds experienced by the STU-R in the current 1-day interval.

cSdslSturPerfCurr1DayUASs

This object specifies the number of unavailable seconds experienced by the STU-R in the current 1-day interval.

cSdslSturPerfPrev1DayMoniSecs

The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected fo ...

cSdslSturPerfPrev1DayLOSs

This object specifies the number of seconds in the current 1-day interval when the STU-R experienced LOS.

cSdslSturPerfPrev1DayLOSQs

This object specifies the number of seconds in the previous 1-day interval when the STU-R experienced LOSQ.

cSdslSturPerfPrev1DayCVs

This object specifies the number of coding violations experienced by the STU-R in the previous 1-day interval.

cSdslSturPerfPrev1DayESs

This object specifies the number of errored seconds experienced by the STU-R in the previous 1-day interval.

cSdslSturPerfPrev1DaySESs

This object specifies the number of severely errored seconds experienced by the STU-R in the previous 1-day interval.

cSdslSturPerfPrev1DayUASs

This object specifies the number of unavailable seconds experienced by the STU-R in the previous 1-day interval.

cSdslStucIntervalTable

This table contains physical-layer statistics intervals for STU-C class devices supported by the system. The interval tables are modeled after RFC 2493, Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals, RFC 2493

cSdslStucIntervalEntry

A 15-miute interval of physical-layer statistics for a STU-C class device supported by the system. There exists up to 96 entries for each ifEntry with an ifType of sdsl(96).

cSdslStucIntervalNumber

The interval in which the statistics were collected, where the value of 1 represents the most recent interval, and the value of 96 represents the interval collected 24 hours ago. Intervals 2..96 are optional.

cSdslStucIntervalValidData

This object specifies whether the data for this interval is valid.

cSdslStucIntervalLOSs

This object specifies the number of seconds in the interval when the STU-C experienced LOS.

cSdslStucIntervalLOSQs

This object specifies the number of seconds in the interval when the STU-C experienced LOSQ.

cSdslStucIntervalCVs

This object specifies the number of coding violations experienced by the STU-C in the interval.

cSdslStucIntervalESs

This object specifies the number of errored seconds experienced by the STU-C in the interval.

cSdslStucIntervalSESs

This object specifies the number of severely errored seconds experienced by the STU-C in the interval.

cSdslStucIntervalUASs

This object specifies the number of unavailable seconds experienced by the STU-C in the interval.

cSdslStucIntervalInits

This object specifies the number of line initializations attempted by the STU-C in the interval.

cSdslStucIntervalUnavlRsrcs

This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space in the interval.

cSdslSturIntervalTable

This table contains physical-layer statistics intervals for STU-R class devices supported by the system. The interval tables are modeled after RFC 2493, Textual Conventions for MIB Modules Using Performance History Based on 15 Minute Intervals, RFC 2493

cSdslSturIntervalEntry

A 15-miute interval of physical-layer statistics for a STU-R class device supported by the system. There exists up to 96 entries for each ifEntry with an ifType of sdsl(96).

cSdslSturIntervalNumber

The interval in which the statistics were collected, where the value of 1 represents the most recent interval, and the value of 96 represents the interval collected 24 hours ago. Intervals 2..96 are optional.

cSdslSturIntervalValidData

This object specifies whether the data for this interval is valid.

cSdslSturIntervalLOSs

This object specifies the number of seconds in the interval when the STU-R experienced LOS.

cSdslSturIntervalLOSQs

This object specifies the number of seconds in the interval when the STU-R experienced LOSQ.

cSdslSturIntervalCVs

This object specifies the number of coding violations experienced by the STU-R in the interval.

cSdslSturIntervalESs

This object specifies the number of errored seconds experienced by the STU-R in the interval.

cSdslSturIntervalSESs

This object specifies the number of severely errored seconds experienced by the STU-R in the interval.

cSdslSturIntervalUASs

This object specifies the number of unavailable seconds experienced by the STU-R in the interval.

cSdslLineConfProfileTable

This table extends the adslLineConfProfileTable and contains enterprise-specific SDSL line configuration information.

cSdslLineConfProfileEntry

A configuration profile containing enterprise-specific SDSL line configuration information.

cSdslLineMaxRate

This object specifies the desired line rate which the STU-C will attempt to train at.

cSdslLineFramingMode

This object specifies the desired Transmission Convergence framing structure being used by the interface.

cSdslStucTargetSnrMgn

This object specifies the target SNR margin. This is the desired noise margin the STU-C must achieve with a BER of 10-7 or better to successfully complete training. The value for this object must be in multiples of 10. The specified value will be rounded ...

cSdslStucMaxSnrMgn

This object specifies the maximum acceptable SNR margin. If the noise margin exceeds this level, then the STU-C should attempt to reduce its power output to optimize its operation. The value for this object must be in multiples of 10. The specified value ...

cSdslStucMinSnrMgn

This object specifies the minimum acceptable SNR margin. If the noise margin falls below this level, the STU-C will retrain. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level ...

cSdslStucOutputPwr

This object specifies the transmit power level used by the STU-C. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10.

cSdslShdslLineMaxRate

This object specifies the desired line rate at which the G.shdsl STU-C will attempt to train.

cSdslStucPsdMaskType

This object specifies the PSD mask type for the transceiver. For all values of the cSdslShdslLineMaxRate, the symmetric PSD masktype is selectable. Asymmetric mask is only selectable for the following rates: 776000, 784000, 1552000, 2056000, 2312000.

cSdslStucAnnex

This object specifies the operating conditions for the port of G.shdsl CO equipment . Annex A is optimized for conditions typically encountered within the North American network,whereas Annex B is optimized for conditions typically encountered within the ...

cSdslLineEquipmentType

This object specifies the type of the STU device ,either STU-C or STU-R

cSdslLineAutoRateEnable

This object specifies whether the device uses the rate adaptive training mode.

cSdslStucThresholdSnrMgn

This object specifies the SNR margin threshold. An appropriate alarm should be generated when the difference between the actual SNR and the SNR required to maintain BER of 10E-7 is less than this value. The value for this object must be in multiples of 1 ...

cSdslSturAnnex

This object specifies the operating conditions for the port of G.shdsl CPE equipment. Annex A is optimized for conditions typically encountered within the North American network,whereas Annex B is optimized for conditions typically encountered within the ...

cSdslLineAlarmConfProfileTable

This table extends the adslLineAlarmConfProfileTable and contains enterprise-specific SDSL line configuration information pertaining to alarms.

cSdslLineAlarmConfProfileEntry

A configuration profile containing enterprise-specific SDSL line configuration information pertaining to alarms

cSdslStucThreshMinRate

This object specifies the line rate threshold. When the agent observes the line rate fall below this value, an appropriate alarm should be generated. The default value for this object should be the value of the cSdslLineMaxRate object. If the agent imple ...

cSdslStucThreshMinSnrMgn

This object specifies the SNR margin threshold. When the agent observes the received SNR margin fall below this value, an appropriate alarm should be generated. If the agent implements the CISCO-ENTITY-ALARM-MIB, the alarm generated should be through the ...

cSdslStucBasicGroup

A collection of managed objects defining the basic operation of an STU-C (i.e., no rate adaptation). This specification is replaced by cSdslStucBasicGroupRev1.

cSdslSturBasicGroup

A collection of managed objects defining the basic operation of an STU-R.This specification is replaced by cSdslSturBasicGroupRev1

cSdslSturGroup

A collection of managed objects defining the capability to remotely manage a STU-R. This is replaced by cSdslSturGroupRev1.

cSdslStucPMCounterGroup

A collection of managed objects defining basic near-end performance monitoring capability.

cSdslStucPM15MinIntervalGroup

A collection of managed objects defining near-end performance data collection capability using 15-minute intervals.

cSdslStucPM1DayIntervalGroup

A collection of managed objects defining near-end performance data collection capability using 1-day intervals.

cSdslSturPMCounterGroup

A collection of managed objects defining basic far-end performance monitoring capability.

cSdslSturPM15MinIntervalGroup

A collection of managed objects defining far-end performance data collection capability using 15-minute intervals.

cSdslSturPM1DayIntervalGroup

A collection of managed objects defining far-end performance data collection capability using 1-day intervals.

cSdslStucRateAdaptiveGroup

A collection of managed objects defining rate adaptive operation of an STU-C.

cSdslStucAlarmConfProfileGroup

A collection of traps generated by the agent to signal threshold alarms.

cSdslStucBasicGroupRev1

A collection of managed objects defining the basic operation of an STU-C. This specification is replaced by cSdslStucBasicGroupRev2.

cSdslSturBasicGroupRev1

A collection of managed objects defining the basic operation of an STU-R. This specification is replaced by cSdslSturBasicGroupRev2

cSdslStucBasicGroupRev2

A collection of managed objects defining the basic operation of an STU-C.

cSdslSturBasicGroupRev2

A collection of managed objects defining the basic operation of an STU-R.

cSdslSturGroupRev1

A collection of managed objects defining the capability to remotely manage a STU-R.