CISCO-SIBU-MANAGERS-MIB Download

cmIpConfigMethod

Indicates the management IP address is got from user configuration or from Bootp. The default value is 1. This value of this object determines how the device obtains its IP address. If set to manual(1), the ip address is the value configured by the user ...

cmIpConfigAddress

The device's administrative IP address. The device may automatically discover a value for this object using the BootStrap protocol (BOOTP). The object value is also duplicated in the MIB-II ipAddrTable. This object is writable only if the value of ipCon ...

cmIpConfigSubnetMask

The device's administrative IP subnet mask. The device may automatically discover a value for this object using the BootStrap protocol (BOOTP). The object value is also duplicated in the MIB-II ipAddrTable. This object is writable only if the value of i ...

cmIpConfigDefaultGateway

The default gateway IP address is the address of the next hop router the switch uses to reach a non-local IP host when the switch does not know the return route. During a normal management protocol exchange with an IP client host, the switch simply sends ...

cmConsoleCLIInactiveTimeout

The number of seconds of command line console session inactivity to wait before ending the session. Once a session has ended, the user must resupply the cli console password to regain access. A value of 0 indicates no timeout, and is the default value.

cmConsoleCLIPasswordMaxAttempts

The number of consecutive invalid password attempts allowed before the command line console is shut down (kept silent) for a configured duration. A zero value permits unlimited attempts. The default value is 3.

cmConsoleCLISilentTime

The number of minutes during which the command line console will be unavailable after repeated failed attempts to logon. A zero value specifies no silent time, and is the default value.

cmConsoleWebAdminState

This variable enables or disables the Web console interface. The default value is enabled(1). Enabling the console provides access to management via the web console.

cmConsoleWebHttpPort

This variable allows the user to configure a specific port on which the HTTP server for the web console will listen for TCP connections. Port number 23 is prohibitted for preventing from disturbing telnet port.

cmSnmpSetManagerTable

Table containing a list of IP addresses of workstations permitted to issue SNMP SET requests. Such a workstation is called a Set Manager. If this table is empty then any SET request with a matching SET community string is allowed. If at least one Set m ...

cmSnmpSetManagerEntry

An IP address of a manager station allowed to issue SET requests to this management agent.

cmSnmpSetManagerAddr

The SET Manager is assumed to be Internet UDP/IP based. And this is the manager's IP address.

cmSnmpSetManagerRowStatus

The status of this conceptual row. The row can be set to active, createAndGo, and destroy. On creation, all objects in an entry must be created in the same request.

cmSnmpTrapManagerTable

Table containing a list of Network Management Stations that are to receive traps generated by this Network Management Agent. Such an NMS is called a Trap Manager. An entry can be created and deleted via SNMP, command line interface or web console.

cmSnmpTrapManagerEntry

A destination address and community string to a particular trap manager.

cmSnmpTrapManagerAddr

The trap manager is assumed to be Internet UDP/IP based. And this is the manager's IP address.

cmSnmpTrapManagerCommunity

Community string used for traps sent to this trap manager.

cmSnmpTrapManagerRowStatus

The status of this conceptual row. The row can be set to active, createAndGo, and destroy. On creation, all objects in an entry must be created in the same request.

ciscoSibuManagersIpConfigGroup

A collection of objects to configure IP address for remote management.

ciscoSibuManagersCLIConsoleGroup

A collection of objects to configure command line interface console access.

ciscoSibuManagersWebConsoleGroup

A collection of objects to configure web console access.

ciscoSibuManagersSnmpSetManagerGroup

A collection of objects to configure SNMP set manager restrictions.

ciscoSibuManagersSnmpTrapManagerGroup

A collection of objects to configure trap managers.