CISCO-STP-EXTENSIONS-MIB Download
The MIB module for managing Cisco extensions to
the 802.1D Spanning Tree Protocol (STP).
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-STP-EXTENSIONS-MIB
- stpxUplinkFastEnabled
- An indication of whether the UplinkFast capability is administratively enabled on the device. If the platform does not support configuration of this object when the object value of stpxSpanningTreeType is mst(4), then this object is not instantiated.
- stpxUplinkFastTransitions
- The cumulative number of UplinkFast transitions (from the STP 'Blocking' state directly to the STP 'Forwarding' state). All transitions are included in this counter, irrespective of the instance of the Spanning Tree Protocol on which they occur. If the p ...
- stpxUplinkStationLearningGenRate
- The maximum number of station-learning frames that this device will generate in each 100 milli-second period after a UplinkFast transition. By configuring this object, the network administrator can limit the rate at which station-learning frames are gene ...
- stpxUplinkStationLearningFrames
- The cumulative number of station-learning frames generated due to UplinkFast transitions. All generated station-learning frames are included in this counter, irrespective of the instance of the Spanning Tree Protocol on which the UplinkFast transition oc ...
- stpxUplinkFastOperEnabled
- An indication of whether the UplinkFast capability is operationally enabled on the device.
- stpxPreferredVlansTable
- The table containing indications of which VLANs are preferred on which VLAN trunk ports. The preferred VLANs on a trunk port have a lower Path Cost value compared with the VLANs on the trunk not in the preferred list. If the value of stpxSpanningTreeType ...
- stpxPreferredVlansEntry
- An entry indicating which VLANs are preferred on a specific VLAN trunk port.
- stpxPreferredVlansMap
- A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet co ...
- stpxPreferredVlansMap2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 10 ...
- stpxPreferredVlansMap3k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 20 ...
- stpxPreferredVlansMap4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 30 ...
- stpxPVSTVlanTable
- information for Spanning Tree PVST+ protocol. An entry will exist for each VLAN existing on the device.
- stpxPVSTVlanEntry
- information for a particular Virtual LAN.
- stpxPVSTVlanIndex
- Virtual LAN associated with this information.
- stpxPVSTVlanEnable
- Protocol is enabled for this Virtual LAN. If Spanning Tree PVST+ Protocol is not supported on this VLAN, then notApplicable(3) will be returned while retrieving the object value for this VLAN. If the device only supports a single global Spanning Tree PVST ...
- stpxInconsistencyTable
- A table containing a list of the ports for which a particular VLAN's Spanning Tree has been found to have an inconsistency. Two types of inconsistency are discovered: 1) an inconsistency where two different port types have been plugged together; and 2) a ...
- stpxInconsistencyEntry
- A VLAN on a particular port for which a Spanning Tree inconsistency is currently in effect.
- stpxVlanIndex
- The VLAN id of the VLAN.
- stpxPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxInconsistentState
- The types of inconsistency which have been discovered on this port for this VLAN's Spanning Tree. When this object exists, the value of the corresponding instance of the Bridge MIB's dot1dStpPortState object will be 'broken(6)'.
- stpxBackboneFastEnabled
- An indication of whether the BackboneFast capability is administratively enabled on the device.
- stpxBackboneFastInInferiorBPDUs
- The number of inferior BPDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
- stpxBackboneFastInRLQRequestPDUs
- The number of Root Link Query request PDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
- stpxBackboneFastInRLQResponsePDUs
- The number of Root Link Query response PDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
- stpxBackboneFastOutRLQRequestPDUs
- The number of Root Link Query request PDUs transmitted by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
- stpxBackboneFastOutRLQResponsePDUs
- The number of Root Link Query response PDUs transmitted by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
- stpxBackboneFastOperEnabled
- An indication of whether the BackboneFast capability is operationally enabled on the device.
- stpxRootGuardConfigTable
- A table containing a list of the bridge ports for which Spanning Tree RootGuard capability can be configured.
- stpxRootGuardConfigEntry
- A bridge port for which Spanning Tree RootGuard capability can be configured.
- stpxRootGuardConfigPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxRootGuardConfigEnabled
- An indication of whether the RootGuard capability is enabled on this port or not. This configuration will be applied to all Spanning Tree instances in which this port exists.
- stpxRootInconsistencyTable
- A table containing a list of the bridge ports for which a particular Spanning Tree instance has been found to have an root-inconsistency. The agent creates a new entry in this table whenever it detects a new root-inconsistency, and deletes entries when/so ...
- stpxRootInconsistencyEntry
- A Spanning Tree instance on a particular port for which a Spanning Tree root-inconsistency is currently in effect.
- stpxRootInconsistencyIndex
- The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1) or rapidPvstPlus(5).
- stpxRootInconsistencyPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxRootInconsistencyState
- Indicates whether the port on a particular Spanning Tree instance is currently in root-inconsistent state or not.
- stpxSpanningTreeType
- The actual mode of spanning tree protocol runs on the device. It can be one of the following: pvstPlus -- PVST+ (Per VLAN Spanning Tree+ Protocol). mistp -- MISTP (Multi Instance Spanning Tree Protocol). mistpPvstPlus -- MISTP with the tunneling scheme ...
- stpxSpanningTreePathCostMode
- Indicates the administrative spanning tree path cost mode configured on device.
- stpxLongStpPortPathCostTable
- A table containing the spanning tree port path cost configuration when stpxSpanningTreePathCostOperMode is long(2). If the value of stpxSpanningTreePathCostOperMode is short(1), this table is not instantiated.
- stpxLongStpPortPathCostEntry
- A conceptual row containing the spanning tree port path cost configuration.
- stpxLongStpPortPathCost
- The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in 32 bits value range when the stpxSpanningTreePathCostOp ...
- stpxExtendedSysIDAdminEnabled
- Indicates whether Extended System ID feature is administratively enabled on the device or not.
- stpxExtendedSysIDOperEnabled
- Indicates whether Extended System ID feature is operationaly enabled on the device or not. If the value of this object is true(1), then the accepted values for dot1dStpPriority in BRIDGE-MIB should be multiples of 4096 plus bridge instance ID, such as Vla ...
- stpxNotificationEnable
- Indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. newRoot -- the newRoot notification as defined in BRIDGE-MIB. topologyChange -- the topol ...
- stpxSpanningTreePathCostOperMode
- Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the d ...
- stpxMISTPInstanceNumber
- The number of MISTP instances, that are supported by the device when the value of stpxSpanningTreeType is either mistp(2) or mistpPvstPlus(3).
- stpxMISTPInstanceTable
- This table contains one entry for each instance of MISTP and it contains stpxMISTPInstanceNumber entries, numbered from 1 to stpxMISTPInstanceNumber. This table is only instantiated when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
- stpxMISTPInstanceEntry
- A conceptual row containing the status of the MISTP instance.
- stpxMISTPInstanceIndex
- An arbitrary integer within the range from 1 to the value of stpxMISTPInstanceNumber that uniquely identifies an instance.
- stpxMISTPInstanceEnable
- This object indicates whether the MISTP protocol is currently enabled on the MISTP instance. If this object is set to 'true' - the MISTP protocol will run on this instance. 'false' - the MISTP protocol will stop running on this instance. DEFVAL { tru ...
- stpxMISTPInstanceVlansMapped2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant b ...
- stpxMISTPInstanceVlansMapped3k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant b ...
- stpxMISTPInstanceVlansMapped4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant b ...
- stpxVlanMISTPInstMapTable
- A table containing the MISTP Instance Index of the VLANs for a particular management domain. This table is only instantiated when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
- stpxVlanMISTPInstMapEntry
- A conceptual row containing the MISTP Instance Index of the VLAN for a particular management domain.
- stpxVlanMISTPInstMapInstIndex
- The MISTP instance, to which the corresponding vlan is mapped. If this value of this mib object is 0, the corresponding vlan is not configured to be mapped to any MISTP instance and all the ports under this VLAN remain in blocking state.
- stpxVlanMISTPInstMapEditTable
- A table containing the MISTP related information for the VLANs in the Edit Buffers for a particular management domain. This table is only instantiated when when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
- stpxVlanMISTPInstMapEditEntry
- Information about one VLAN mapping to one instance in the Edit Buffer for a particular management domain.
- stpxVlanMISTPInstMapEditInstIndex
- The MISTP instance, to which the corresponding vlan would be mapped. The value of this mib object is from 0 to the value of stpxMISTPInstanceNumber. If setting the value of this object to 0, the corresponding vlan will not be mapped to a MISTP instance an ...
- stpxPreferredMISTPInstancesTable
- The table containing indications of which MISTP instances are preferred on which trunk ports. The preferred MISTP instances on a trunk port have a lower Path Cost value compared with the MISTP instances on the trunk not in the preferred list. This table ...
- stpxPreferredMISTPInstancesEntry
- An entry indicating which MISTP instances are preferred on a specific trunk port.
- stpxPreferredMISTPInstancesMap
- A string of octets containing one bit per MISTP instances in the management domain on this trunk port. The first octet corresponds to MISTP instances with InstIndex values of 1 through 8; the second octet to MISTP instances 9 through 16; etc. The most sig ...
- stpxLoopGuardConfigTable
- A table containing a list of the bridge ports for which Spanning Tree LoopGuard capability can be configured.
- stpxLoopGuardConfigEntry
- A bridge port for which Spanning Tree LoopGuard capability can be configured.
- stpxLoopGuardConfigPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxLoopGuardConfigEnabled
- An indication of whether the LoopGuard capability is enabled on this port or not. This configuration will be applied to all the Spanning Tree instances in which this port exists. In order to support additional Loop Guard config mode (default) as defined i ...
- stpxLoopGuardConfigMode
- Indicates the mode of Loop Guard Feature on this port. This configuration will be applied to all the Spanning Tree instances in which this port exists. enable -- the Loop Guard feature is enabled on this port. disable -- the Loop Guard feature is disabled ...
- stpxLoopInconsistencyTable
- A table containing a list of the bridge ports for which a particular Spanning Tree instance has been found to have a loop-inconsistency. The agent creates a new entry in this table whenever it detects a new loop-inconsistency, and deletes entries when/soo ...
- stpxLoopInconsistencyEntry
- A Spanning Tree instance on a particular port for which a Spanning Tree loop-inconsistency is currently in effect.
- stpxLoopInconsistencyIndex
- The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1) or rapidPvstPlus(5).
- stpxLoopInconsistencyPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxLoopInconsistencyState
- Indicates whether the port on a particular Spanning Tree instance is currently in loop-inconsistent state or not.
- stpxLoopGuardGlobalDefaultMode
- Indicates the global default config mode of LoopGuard feature on the device.
- stpxFastStartBpduGuardEnable
- Guard feature on the device. On platforms that does not support per port Bpdu Guard configuration as indicated by the object stpxFastStartPortBpduGuardMode, if the value of this object is set to true(1), and the Fast Start Feature is operationally enable ...
- stpxFastStartBpduFilterEnable
- Filter feature on the device. On platforms that does not support per port Bpdu Filter configuration as indicated by the object stpxFastStartPortBpduFilterMode, if the value of this object is set to true(1), and the Fast Start Feature is operationally ena ...
- stpxFastStartPortTable
- A table containing a list of the bridge ports for which Spanning Tree Port Fast Start can be configured.
- stpxFastStartPortEntry
- A bridge port for which Spanning Tree Port Fast Start can be configured.
- stpxFastStartPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxFastStartPortEnable
- Indicates whether the port is operating in spantree fast start mode. A port with fast start enabled is immediately put in spanning tree forwarding state when that port is detected by the Spanning Tree, rather than starting in blocking state which is the ...
- stpxFastStartPortMode
- Indicates the mode of Fast Start Feature on the port. A port with fast start enabled is immediately put in spanning tree forwarding state when the port is detected by the Spanning Tree, rather than starting in blocking state which is the normal operation. ...
- stpxFastStartPortBpduGuardMode
- Indicates the mode of Bpdu Guard Feature on the port. A port with Bpdu Guard enabled is immediately disabled when the system receives a BPDU from that port. enable -- the Bpdu Guard feature is enabled on this port. disable -- the Bpdu Guard feature is dis ...
- stpxFastStartPortBpduFilterMode
- Indicates the mode of Bpdu Filter Feature on the port. The system will not transmit BPDUs on a port with Bpdu Filter feature enabled. enable -- the Bpdu Filter feature is enabled on this port. disable -- the Bpdu Filter feature is disabled on this port. d ...
- stpxFastStartGlobalDefaultMode
- Indicates the global default mode of the Fast Start feature on the device.
- stpxFastStartOperModeTable
- A table containing a list of the bridge ports for a particular Spanning Tree Instance.
- stpxFastStartOperModeEntry
- An entry with port fast start oper mode information on a bridge port for a particular Spanning Tree Instance.
- stpxFastStartOperModeInstIndex
- The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1).
- stpxFastStartOperModePortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxFastStartOperMode
- Indicates the fast start operational status of the port on a particular Spanning Tree Instance.
- stpxBpduSkewingDetectionEnable
- Indicates whether BPDU skewing detection feature is enabled or not on the system. If this object has the value of true(1), then the system will detect whether BPDUs received by any port on any Spanning Tree instance are processed at an interval longer tha ...
- stpxBpduSkewingTable
- A table containing a list of the bridge ports for which a particular Spanning Tree instance has been detected to have BPDU skewing occurred since the object value of stpxBpduSkewingDetectionEnable was last changed to true(1). The agent creates a new entry ...
- stpxBpduSkewingEntry
- A Spanning Tree instance on a particular port for which BPDU skewing has been detected.
- stpxBpduSkewingInstanceIndex
- The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1).
- stpxBpduSkewingPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxBpduSkewingLastSkewDuration
- Indicates the skew duration in milliseconds of the last BPDU skewing detected.
- stpxBpduSkewingWorstSkewDuration
- Indicates the skew duration in milliseconds of the worst BPDU skewing detected.
- stpxBpduSkewingWorstSkewTime
- Indicates the value of sysUpTime when the worst BPDU skewing was detected.
- stpxMSTMaxInstanceNumber
- The maximum MST (Multiple Spanning Tree) instance id, that can be supported by the device for Cisco proprietary implementation of the MST Protocol. This object is deprecated and replaced by stpxSMSTMaxInstanceID.
- stpxMSTRegionName
- The operational MST region name.
- stpxMSTRegionRevision
- The operational MST region version. This object is deprecated and replaced by stpxSMSTRegionRevision.
- stpxMSTInstanceTable
- This table contains MST instance information with one entry for an MST instance within the range of 0 to the object value of stpxMSTMaxInstanceNumber. This table is deprecated and replaced by stpxSMSTInstanceTable.
- stpxMSTInstanceEntry
- A conceptual row containing the MST instance information.
- stpxMSTInstanceIndex
- An integer that uniquely identifies an MST instance within the range of 0 to the object value of stpxMSTMaxInstanceNumber. This object is deprecated and replaced by stpxSMSTInstanceIndex.
- stpxMSTInstanceVlansMapped
- A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in th ...
- stpxMSTInstanceVlansMapped2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant b ...
- stpxMSTInstanceVlansMapped3k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant b ...
- stpxMSTInstanceVlansMapped4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant b ...
- stpxMSTInstanceRemainingHopCount
- The remaining hop count for this MST instance. This object will take on value of 40 if the object value of stpxSMSTInstanceRemainingHopCount is greater than 40. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4). This ...
- stpxMSTRegionEditBufferStatus
- Indicates the current ownership status of the unique Region Config Edit Buffer. released -- the Edit Buffer can be acquired by any of the SNMP management stations. acquiredBySnmp -- the Edit Buffer is acquired by any of the SNMP management stations. acqui ...
- stpxMSTRegionEditBufferOperation
- Indicates the operation that is performed on the Region Config Edit Buffer. other -- none of the following operations. acquire -- acquire the Edit Buffer. This operation can only be performed when the object stpxMSTRegionEditBufferStatus has the value o ...
- stpxMSTRegionEditName
- The MST region name in the Edit Buffer. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
- stpxMSTRegionEditRevision
- The MST region version in the Edit Buffer. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2). This object is deprecated and replaced by stpxSMSTRegionEditRevision.
- stpxMSTInstanceEditTable
- This table contains MST instance information in the Edit Buffer with one entry for each MST instance numbered from 0 to stpxMSTMaxInstanceNumber. This table is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2). Th ...
- stpxMSTInstanceEditEntry
- A conceptual row containing MST instance information in the Edit Buffer.
- stpxMSTInstanceEditIndex
- An integer that uniquely identifies an MST instance from 0 to the object value of stpxMSTMaxInstanceNumber. The instances of this table entry with stpxMSTInstanceEditIndex of zero can not be modified. This object is deprecated and replaced by stpxSMSTInst ...
- stpxMSTInstanceEditVlansMap
- A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in th ...
- stpxMSTInstanceEditVlansMap2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant b ...
- stpxMSTInstanceEditVlansMap3k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant b ...
- stpxMSTInstanceEditVlansMap4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant b ...
- stpxPreferredMSTInstancesTable
- The table containing indications of which MST instances are preferred on which trunk ports. The preferred MST instances on a trunk port have a lower Path Cost value compared with the MST instances on the trunk not in the preferred list.
- stpxPreferredMSTInstancesEntry
- An entry indicating which MST instances are preferred on a specific trunk port.
- stpxPreferredMSTInstancesMap
- A string of octets containing one bit per MST instances on this trunk port. The first octet corresponds to MST instances of 0 through 7; the second octet to MST instances 8 through 15; etc. The most significant bit of each octet corresponds to the lowest ...
- stpxMSTPortTable
- A table containing port information for the MST Protocol on all the bridge ports existing on the system.
- stpxMSTPortEntry
- An entry with port information for the MST Protocol on a bridge port.
- stpxMSTPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxMSTPortAdminLinkType
- Indicates the administrative link type configuration of a bridge port for the MST protocol. pointToPoint -- the port is administratively configured to be connected to a point-to-point link. shared -- the port is administratively configured to be connected ...
- stpxMSTPortOperLinkType
- Indicates the operational link type of a bridge port for the MST protocol. pointToPoint -- the port is operationally connected to a point-to-point link. shared -- the port is operationally connected to a shared medium. other -- none of the above. This obj ...
- stpxMSTPortProtocolMigration
- The protocol migration control on this port. When the object value of stpxSpanningTreeType is mst(4) or rapidPvstPlus(5), setting true(1) to this object forces the device to try using version 2 BPDUs on this port. When the object value of stpxSpanningTre ...
- stpxMSTPortStatus
- Indicates the operational status of the port for the MST protocol. edge -- this port is an edge port for the MST region. boundary -- this port is a boundary port for the MST region. pvst -- this port is connected to a PVST/PVST+ bridge. stp -- this port ...
- stpxMSTPortRoleTable
- A table containing a list of the bridge ports for a particular MST instance. This table is only instantiated when the stpxSpanningTreeType is mst(4). This table is deprecated and replaced with stpxRSTPPortRoleTable.
- stpxMSTPortRoleEntry
- An entry containing the port role information for the MST protocol on a port for a particular MST instance existing on the system.
- stpxMSTPortRoleInstanceIndex
- The MST instance id within the range of 0 to stpxMSTMaxInstanceNumber.
- stpxMSTPortRolePortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxMSTPortRoleValue
- Indicates the port role on a particular MST instance for the MST protocol. disabled -- this port has no role on this MST instance. root -- this port has the role of root port on this MST instance. designated -- this port has the role of designated port o ...
- stpxMSTMaxHopCount
- The maximum number of hops for the MST region. This object will take on value of 40 if the object value of stpxSMSTMaxHopCount is greater than 40. This object is deprecated and replaced by stpxSMSTMaxHopCount.
- stpxRSTPPortTable
- A table containing port information for the RSTP Protocol on all the bridge ports existing in the system.
- stpxRSTPPortEntry
- An entry with port information for the RSTP Protocol on a bridge port.
- stpxRSTPPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxRSTPPortAdminLinkType
- Indicates the administrative link type configuration of a bridge port for the RSTP protocol. pointToPoint -- the port is administratively configured to be connected to a point-to-point link. shared -- the port is administratively configured to be connecte ...
- stpxRSTPPortOperLinkType
- Indicates the operational link type of a bridge port for the RSTP protocol. pointToPoint -- the port is operationally connected to a point-to-point link. shared -- the port is operationally connected to a shared medium. other -- none of the above. This ob ...
- stpxRSTPPortProtocolMigration
- The protocol migration control on this port. When the object value of stpxSpanningTreeType is mst(4) or rapidPvstPlus(5), setting true(1) to this object forces the device to try using version 2 BPDUs on this port. When the object value of stpxSpanningTre ...
- stpxRSTPPortRoleTable
- A table containing a list of the bridge ports for a particular Spanning Tree instance. This table is only instantiated when the stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
- stpxRSTPPortRoleEntry
- An entry containing the port role information for the RSTP protocol on a port for a particular Spanning Tree instance.
- stpxRSTPPortRoleInstanceIndex
- The Spanning Tree instance id, it can either be a VLAN number if the stpxSpanningTreeType is rapidPvstPlus(5) or an MST instance id if the stpxSpanningTreeType is mst(4).
- stpxRSTPPortRolePortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxRSTPPortRoleValue
- Indicates the port role on a particular Spanning Tree instance for the RSTP protocol. disabled -- this port has no role in this Spanning Tree instance. root -- this port has the role of root port in this Spanning Tree instance. designated -- this port ha ...
- stpxRSTPTransmitHoldCount
- The Transmit Hold Count.
- stpxRPVSTPortTable
- A table containing a list of the bridge ports for a particular Spanning Tree Instance. This table is only instantiated when the object value of stpxSpanningTreeType is rapidPvstPlus(5).
- stpxRPVSTPortEntry
- An entry with port status information on a bridge port for a particular Spanning Tree Instance.
- stpxRPVSTPortVlanIndex
- The VLAN id of the VLAN.
- stpxRPVSTPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxRPVSTPortStatus
- Indicates the operational status of the port for the Rapid PVST+ protocol. edge -- this port is an edge port for the RST region. unused1 -- unused bit 1. unused2 -- unused bit 2. stp -- this port is connected to a Single Spanning Tree/PVST+ bridge. disput ...
- stpxSMSTMaxInstances
- The maximum number of MST instances that can be supported by the device for IEEE MST.
- stpxSMSTMaxInstanceID
- The maximum MST instance ID that can be supported by the device for IEEE MST.
- stpxSMSTRegionRevision
- The operational region version for IEEE MST.
- stpxSMSTRegionEditRevision
- The MST region version in the Edit Buffer for IEEE MST. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
- stpxSMSTInstanceTable
- This table contains MST instance information for IEEE MST.
- stpxSMSTInstanceEntry
- A conceptual row containing the MST instance information for IEEE MST.
- stpxSMSTInstanceIndex
- The MST instance ID, the value of which is in the range from 0 to stpxSMSTMaxInstanceID.
- stpxSMSTInstanceVlansMapped1k2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 0 through 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each oct ...
- stpxSMSTInstanceVlansMapped3k4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant b ...
- stpxSMSTInstanceRemainingHopCount
- The remaining hop count for this MST instance. If this object value is not applicable on an MST instance, then the value retrieved for this object for that MST instance will be -1. This object is only instantiated when the object value of stpxSpanningTree ...
- stpxSMSTInstanceCISTRegionalRoot
- Indicates the Bridge Identifier (refer to BridgeId defined in BRIDGE-MIB) of CIST (Common and Internal Spanning Tree) Regional Root for the MST region. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4) and stpxSMSTIn ...
- stpxSMSTInstanceCISTIntRootCost
- Indicates the CIST Internal Root Path Cost, i.e., the path cost to the CIST Regional Root as specified by the corresponding stpxSMSTInstanceCISTRegionalRoot for the MST region. This object is only instantiated when the object value of stpxSpanningTreeType ...
- stpxSMSTInstanceEditTable
- This table contains MST instance information in the Edit Buffer. This table is only instantiated when the object value of stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
- stpxSMSTInstanceEditEntry
- A conceptual row containing MST instance information in the Edit Buffer. The total number of entries in this table has to be less than or equal to the object value of stpxSMSTMaxInstances.
- stpxSMSTInstanceEditIndex
- The MST instance ID, the value of which is in the range from 0 to stpxSMSTMaxInstanceID. The instances of this table entry with stpxSMSTInstanceEditIndex of zero is automatically created by the device and can not modified.
- stpxSMSTInstanceEditVlansMap1k2k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 0 through 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each oct ...
- stpxSMSTInstanceEditVlansMap3k4k
- A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant b ...
- stpxSMSTInstanceEditRowStatus
- This object controls the creation and deletion of a row in stpxSMSTInstanceEditTable. When creating an entry in this table, 'createAndGo' method is used and the value of this object is set to 'active'. Deactivation of an 'active' entry is not allowed. Wh ...
- stpxSMSTPortTable
- A table containing port information for the MST Protocol on all the bridge ports existing on the system. This table is only instantiated when the object value of stpxSpanningTreeType is mst(4)
- stpxSMSTPortEntry
- An entry with port information for the MST protocol on a bridge port.
- stpxSMSTPortIndex
- The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
- stpxSMSTPortStatus
- Indicates the operational status of the port for the MST protocol. edge -- this port is an edge port for the MST region. boundary -- this port is a boundary port for the MST region. pvst -- this port is connected to a PVST/PVST+ bridge. stp -- this port ...
- stpxSMSTPortAdminHelloTime
- The adminitratively configured hello time in hundredth of seconds on a port for IEEE MST. The granularity of this timer is 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This object ...
- stpxSMSTPortConfigedHelloTime
- Indicates the effective configuration of the hello time on a port.
- stpxSMSTPortOperHelloTime
- The operational hello time in hundredth of seconds on a port for IEEE MST. If this object value is not applicable on a port, then the value retrieved on that port will be -1.
- stpxSMSTPortAdminMSTMode
- The desired MST mode of this port. preStandard -- this port is administratively configured to transmit pre-standard, i.e. pre IEEE MST, BPDUs. auto -- the BPDU transmission mode of this port is based on automatic detection of neighbor ports.
- stpxSMSTPortOperMSTMode
- Indicates the current operational MST mode of this port. unknown -- the operational mode is currently unknown. preStandard -- this port is currently operating in pre-standard MSTP BPDU transmission mode. standard -- this port is currently operating in IEE ...
- stpxSMSTMaxHopCount
- The maximum number of hops for the IEEE MST region.
- stpxSMSTConfigDigest
- The IEEE MST region configuration digest.
- stpxSMSTConfigPreStandardDigest
- The pre-standard MST region configuration digest.
- stpxUplinkGroup
- A collection of objects for managing the UplinkFast capability.
- stpxPreferredVlansGroup
- A collection of objects for indicating preferred VLANs.
- stpxSstpGroup
- A collection of objects to support Cisco's Shared Spanning Tree Protocol (SSTP).
- stpxBackboneGroup
- A collection of objects for managing the BackboneFast capability.
- stpxRootGuardGroup
- A collection of objects to support root guard capabilities.
- stpx4kVlanGroup
- A collection of objects providing information for VLANS with VlanIndex from 1024 to 4095.
- stpxSpanningTreeGroup
- An object selecting what kind of spanning tree protocol.
- stpxMISTPGroup
- A collection objects managing the information of MISTP feature.
- stpxLongPathCostModeGroup
- A collection objects managing the information of spanning tree path cost in 32 bits value.
- stpxPVSTVlanGroup
- A collection of objects managing the information of Spanning Tree PVST+ protocol VLAN configuration.
- stpxMISTPGroup2
- A collection objects managing the information of MISTP instances to VLAN mapping with the range of VlanIndex up to 4095.
- stpxLoopGuardGroup
- A collection of objects to support LoopGuard capabilities.
- stpxFastStartGroup
- A collection of objects to support Spanning Tree Port Fast Start feature.
- stpxBpduSkewingGroup
- This is an optional group with a collection of objects to support Spanning Tree BPDU Skewing feature.
- stpxFastStartGroup2
- An optional group with a collection of objects to support Fast Start global default mode on the device.
- stpxLoopGuardGroup2
- An optional group with a collection of objects to support Loop Guard global default mode on the device.
- stpxMSTGroup
- An optional group with a collection of objects to support Multiple Spanning Tree Protocol on the device.
- stpxPreferredMSTInstancesGroup
- An optional group with a collection of objects to support Preferred MST Instance Map feature for Multiple Spanning Tree Protocol on the device.
- stpxFastStartGroup3
- An optional group with a collection of objects to support per port Bpdu Guard and Bpdu Filter mode configuration on the device.
- stpxUplinkGroup2
- An optional group with a collection of objects to manage the UplinkFast capability.
- stpxBackboneGroup2
- An optional group with a collection of objects to manage the BackboneFast capability.
- stpxMSTGroup2
- An optional group with a collection of objects to support Multiple Spanning Tree Protocol on the device.
- stpxRSTPGroup
- An optional group with a collection of objects to support Rapid Spanning Tree Protocol on the device.
- stpxRPVSTGroup
- An optional group with a collection of objects to support Rapid PVST+ on the device.
- stpxExtendedSysIDGroup
- A collection of objects to manage the Extended System ID capability.
- stpxNotificationEnableGroup
- A collection of objects providing control on the generation of Spanning Tree notifications.
- stpxFastStartOperModeGroup
- A collection of objects providing Spanning Tree Port Fast Start Operatioanl information on a port.
- stpxMSTGroup3
- A collection of objects providing support for Multiple Spanning Tree Protocol on the device.
- stpxSMSTGroup
- A collection of objects providing support for IEEE MST on the device.
- stpxSMSTInstanceGroup
- A collection of objects providing support for MST instance information for IEEE MST on the device.
- stpxSMSTInstanceEditGroup
- A collection of objects providing support for MST instance edit information for IEEE MST on the device.
- stpxSMSTPortStatusGroup
- A collection of objects providing support for port status information for MST Protocol on the device.
- stpxSMSTPortHelloTimeGroup
- A collection of objects providing support for per port hello time information for IEEE MST on the device.
- stpxSMSTInstanceCISTGroup
- A collection of objects providing information about Common and Internal Spanning Tree (CIST) for IEEE MST on the device.
- stpxPathCostOperModeGroup
- A collection of objects providing information about operational spanning tree path cost mode.
- stpxRSTPTransmitHoldCountGroup
- A collection of objects providing information for configuration of transmit hold count for Rapid Spanning Tree Protocol.
- stpxSMSTPortMSTModeGroup
- A collection of objects providing information for port MST mode configuration on the device.
- stpxSMSTMaxHopCountGroup
- A collection of objects providing information for configuration of IEEE MST maximum hop count.
- stpxSMSTConfigDigestGroup
- A collection of objects providing information for MST configuration digests on the device.
- stpxMSTGroup4
- A collection of objects providing support for Multiple Spanning Tree Protocol on the device.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
