CISCO-SYSTEM-EXT-MIB Download
MIB module for monitoring High Availability, SNMP SET
errors and bandwidths. This mib module also provides the
information on core files that are generated in the
system.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-SYSTEM-EXT-MIB
- cseSysCPUUtilization
- The average utilization of CPU on the active supervisor.
- cseSysMemoryUtilization
- The average utilization of memory on the active supervisor.
- cseSysConfLastChange
- The local date and time when the configuration was last changed. This object will be set to zero on power cycle or on reboot of the system. Also, if the clock is changed on local system it is set to zero.
- cseSysAutoSync
- The state of the auto synchronization of images between the active and standby supervisor. Setting the value to sync when the existing value is sync, has no effect on the operation.
- cseSysAutoSyncState
- The status of the current auto synchronization process, or if no such process is in progress, then the state of the most recent one. The value 'notStarted' indicates no auto synchronization process has occurred recently.
- cseWriteErase
- This object is used to initiate a write erase on the device's saved configuration file(s) from which the device loads its configuration when it restarts. If the value of this object is set to 'eraseAll', then all the saved configurations are removed. No a ...
- cseSysConsolePortStatus
- This object describes the status of the console port on this device. The status 'connected' means that there is a cable attached to the console port. The status 'notConnected' means that there is no connection out of the console port.
- cseSysTelnetServiceActivation
- Enables or disables the Telnet service on the device. In other words, it enables or disables the telneting to the device.
- cseSysFIPSModeActivation
- The object to enable/disable FIPS mode on the device. FIPS 140-2 is a set of security requirements for cryptographic modules and it details the U.S. Government requirements for cryptographic modules. A module will comprise both hardware and software, eg ...
- cseSysUpTime
- The time (in seconds) since the entire system was last re-initialized as a result of reload. The initialization being system loaded and running with a system image software on the first active supervisor (SUP). In High Availibility (HA) capable system / S ...
- cseSnmpErrorTable
- A table containing information about the errors which have recently caused the generation of a SNMP Response PDU with a non-zero value in its error-status field for SNMP Set Response PDU. This table serves as an extension to the SNMP's error status when a ...
- cseSnmpErrorEntry
- An entry (conceptual row) in the cseSnmpErrorTable, containing information about an error which has recently caused a SNMP SetRequest to fail. An entry is created by the agent on the occurrence of an error, and is deleted approximately 5 minutes later. ...
- cseSnmpErrorAddressType
- The type of address from which the error-ed SetRequest originated.
- cseSnmpErrorAddress
- The address from which the error-ed SetRequest originated.
- cseSnmpErrorRequestId
- The request-id of the error-ed SetRequest.
- cseSnmpErrorCode
- The code for the Mib object specific error which caused a SetRequest to fail. This error code is platform-specific and for debugging purposes only. For information on this code, the corresponding instance of cseSnmpErrorDescription must be used. This code ...
- cseSnmpErrorDescription
- The error description for the error happened for the SetRequest.
- cseHaRestartReason
- The reason for most recent restart of a service on the 'active' supervisor.
- cseHaRestartStateless
- Tells if the most recent restart of a service on the 'active' supervisor was 'stateless' or not. A 'stateless' restart of a service is where no runtime information is preserved while restarting the service.
- cseHaRestartService
- Name of the service (or process) that was restarted on the 'active' supervisor.
- cseHaShutDownReason
- The description of the reason as to why the system is going to go down.
- cseSwCorePath
- Provides the path where the software cores are stored on the system. The management application can use this path to copy the cores from the system using CISCO-FLASH-MIB.
- cseSwCoresTable
- A table containing information about the system cores that have been generated as an effect of some system failures.
- cseSwCoresEntry
- An entry (conceptual row) in the cseSwCoresTable, containing information about cores that have been generated.
- cseSwCoresModule
- The physical module on which the process crashed.
- cseSwCoresProcName
- The name of the process that crashed and generated core.
- cseSwCoresInstance
- The instance of the core for a process identified by cseSwCoresProcName and on the module identified by cseSwCoresModule. To uniquely identify a core, the module number and process name are not sufficient as there could be multiple cores for the same modu ...
- cseSwCoresPID
- The process identifier of the process that dumped the core.
- cseSwCoresTimeCreated
- The time at which the core was created.
- cseSwCoresSlotNum
- The slot number corresponding to the cseSwCoresModule in this chassis.
- cseSwCoresFileName
- This object contains the core file-name(including the path, relative to the value in the cseSwCorePath object). If the cseSwCorePath contains zero length octet string, then this object will contain the filename with absolute path. If this object contains ...
- ciscoSwFailureNotifEnable
- This object is used for administratively enabling/disabling the cseFailSwCoreNotify or cseFailSwCoreNotifyExtended notifications.
- ciscoSystemExtInfoGroup
- A collection of objects for system information.
- ciscoSystemExtErrorGroup
- A collection of objects for logging SNMP set error.
- ciscoSystemExtHaGroup
- A collection of objects for High Availability.
- ciscoSystemExtInfoGroupRev1
- A collection of objects for system information.
- ciscoSystemExtInfoGroupOptional
- A collection of objects for system information which are optional.
- ciscoSystemExtSwFailureGroup
- A collection of objects for system software failure information which are optional.
- ciscoSystemExtInfoGroupRev2
- A collection of objects for system information.
- ciscoSystemExtSwFailureGroup2
- A collection of objects for system software failure information which are optional.
- ciscoSystemExtHaGroupRev1
- A collection of objects for High Availability.
- ciscoSystemExtInfoTelnetGroup
- A collection of objects related to telnet support to the device.
- ciscoSystemExtSwFailureGroup3
- A collection of objects related to the core file.
- ciscoSystemExtSwFailureControlGroup
- This group of objects controls the sending of notifications defined in this MIB module.
- ciscoSystemExtInfoFIPSGroup
- A collection of objects related to FIPS support to the device.
- ciscoSystemExtInfoGroupRev3
- A collection of objects for system information.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
