CISCO-VISM-ATM-TRUNK-MIB Download

bearerConnTable

This table describes the statistical information available on a per-bearer connection basis. These values are applicable equally to an endpoint. ::= { bearerConnGrp 1 } SYNTAX BearerConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION ...

bearerAal2ExtRAICnts

This object contains the number of external RAI (Remote Alarm Indication) AAL2 Type3 packets received. External RAI - is a signal that is transmitted upstream from an entity that has detected defects persisting long enough to constitute a received signal ...

bearerAal2ConnAISCnts

This object contains the number of external Conn AIS AAL2 Type2 packets received. External Conn AIS - is transmitted in the downstream direction from the AAL Type 2 connecting point that first detects a defect affecting the AAL Type 2 connection; this inc ...

bearerAal2ConnRDICnts

This object contains the number of external Conn RDI(Remote Defect Indication) AAL2 Type2 packets received. External Conn RDI - is a signal transmitted upstream by an AAL Type 2 endpoint that is in an alarm state as the result of having received an AAL T ...

vismAal2CidICSEnable

This object is used to enable or disable the ICS(Idle Channel Suppression) for a CID. This can be specified while adding the CID and cannot be modified. When the Idle Channel Suppression is enabled the DSP will look for the idle CAS (ABCD bits) pattern sp ...

ciscoVismBearerConnGroup

The collection of objects which are used to represent VISM Bearer connection.

ciscoVismAAl2CidGroup

The collection of objects which are used to represent VISM AAL2 CID connection.

ciscoVismAAl2CidGroupRev1

The collection of objects which are used to represent VISM AAL2 CID connection.

ciscoVismBearerConnGroupRev1

The collection of objects which are used to represent VISM Bearer connection.