CISCO-VISM-DSX1-MIB Download
The MIB module to configure DS1/E1 interface
objects in a Voice Interworking Service Module
(VISM) module. This MIB is an extension
to CISCO-MGX82XX-DSX1-MIB for DS1/E1 configuration
in VISM.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-VISM-DSX1-MIB
- dsx1VismCnfGrpTable
- The VISM specific DS1/E1 configuration table. This table contains the additional VISM configuration information for DS1/E1. ::= { dsx1VismCnfGrp 1 } SYNTAX Dsx1VismCnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the VI ...
- vismEcanREC
- Residual Echo Control (REC) instructs the canceler how to treat echo remaining after cancellation. 'cancelOnly' : REC is disabled. 'suppressResidual': The residual echo is replaced with silence. 'comfortNoise' : Noise is injected in place of resid ...
- vismDsx1V110Enable
- This object specifies whether V.110 detection on the line is enabled or disabled. If the value of this object is 'true', V.110 detection on the line is enabled. If the value of this object is 'false', V.110 detection on the line is disabled. The vismSigna ...
- vismDsx1AlarmLogEnable
- This object specifies whether detailed alarm logging on the DS1 is enabled or disabled. If this object is true, detailed alarm logging for the DS1 will be enabled. If this object is false, detailed alarm logging for the DS1 will be disabled. When this obj ...
- vismDsx1AlarmLogAdminTimer
- This object specifies the time for which the detailed alarm logging for the DS1 will remain active. The value in this object can be set and is valid only if vismDsx1AlarmLogEnable for this DS1 is set to true. If this object is set to 0, it indicates that ...
- vismDsx1AlarmLogOperTimer
- This object specifies the time remaining in minutes for which the detailed alarm logging will remain active on the DS1. When this value becomes 0, it indicates that the DS1 has run through the time specified in vismDsx1AlarmLogOperTimer. This will cause t ...
- vismDsx1ElectricalSignalEnable
- This object specifies whether electrical signal on the line is enabled or disabled. If the value of this object is 'true', electrical signal on the line is enabled. If the value of this object is 'false', electrical signal on the line is disabled.
- dsx1VismStatsGrpTable
- The VISM specific DS1/E1 statistics table. This table contains the additional VISM statistics information for DS1/E1. ::= { dsx1VismStatsGrp 1 } SYNTAX Dsx1VismStatsGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the VISM ...
- vismDsx1TotalTxFrameSlips
- The number of accumulative frame slips in the transmit direction.
- vismDsx1TotalRxUncontrolledSlips
- The number of accumulative uncontrolled slips in the receive direction.
- vismDsx1TotalRxFrameSlips
- The number of accumulative frame slips in the receive direction.
- vismSlipCntDiscontinuityTime
- This object will represent the timestamp since sysUpTime when the statistics in this interval were discontinued. If this has the default value then it indicates that the statistics in this interval have not been discontinued.
- dsx1AlmHistoryTable
- The TDM line interface alarm history table.
- dsx1AlmHistoryEntry
- An entry in the DS1/E1 Alarm History table.
- almlineNumber
- This object is the identifier of a DS1/E1 Interface on a managed device. ::= { dsx1AlmHistoryEntry 1 } SYNTAX Integer32 (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION This is the alarm interval number which associates with time interval a ...
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
