CISCO-VOICE-AALX-PROFILE-MIB Download

cvapCodecTable

This table defines attributes of CODEC negotiation. These attributes are used for CODEC negotiation of a call when a call setup request is made by call agent to the media gateway. One entry for AAL1 and one entry for AAL5 are created when a new media gate ...

cvapCodecEntry

An entry containing management information for CODEC negotiation of the adaptation type for a call in the media gateway.

cvapCodecNegotiationAdaptType

This object specifies the adaptation layer which supports CODEC negotiation of calls and the order of CODECs used in negotiation can be configured as the value of cvapCodecNegotiationOption. The adaptation types include: aal5 :VoIP with AAL5 as adaptatio ...

cvapCodecNegotiationOption

This object defines the CODEC negotiation option which determines the order of CODECs used by a call during CODEC negotiation. The possible CODEC negotiation options are as follows: Lco - local connection options (from local call agent) Rcd - remote conne ...

cvapCodecConfigTable

This table contains the attributes whose configuration depends on CODEC types and adaptation types. For each adaptation layer, one entry for each CODEC rate supported by the media gateway is created by the system at power-up.

cvapCodecConfigEntry

An entry represents a CODEC rate supported for VoIP or VoATM with different adaptation layers in the media gateway.

cvapCodecConfigAdaptType

An unique index identifying the adaptation layer supported by voice applications in the media gateway. The adaptation types include: other :Voice over other media. aal5 :VoIP with AAL5 as adaptation layer. aal1 :VoATM with AAL1 as adaptation layer. aal2 ...

cvapCodecConfigType

This object specifies the CODEC rate defined in CvcSpeechCoderRate.

cvapCodecConfigPreference

This object specified the preference configured by the user for each CODEC. Lower the number, higher the preference of the CODEC. If this object is set to 0, the corresponding CODEC will not be used in CODEC negotiation or in CODEC choose command. For COD ...

cvapCodecConfigVoicePacketPeriod

This object specifies the packetization period for a particular CODEC in voice application. The packetization period represents the time for the media gateway to collect the data from TDM side before it sends out the packet. This object is not applicable ...

cvapCodecConfigVbdPacketPeriod

This object specifies the packetization period for a particular CODEC in VBD (Voice Band Data) upspeed. The packetization period represents the time for the media gateway to collect the data from TDM side before it sends out the packet. This object is not ...

cvapCodecConfigJitterDelayMode

The object specifies the jitter buffer mode applied to a call connection. adaptive - means to use cvapCodecConfigNewJtrNomDelay as the initial jitter buffers size and let the DSP pick the optimal value of the jitter buffer size between the range of cvapCo ...

cvapCodecConfigJitterNomDelay

This object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is fixed at this value for the duration of the call. if cvapCodecConfigJitterDelayMode is set to adaptive(1), the jitter buffer i ...

cvapCodecConfigJitterMinDelay

This object specifies the minimum jitter buffer size. If cvapCodecConfigJitterDelayMode is set to adaptive(1), the DSP will dynamically pick an optimal value of the jitter buffer size between the range of cvapCodecConfigJitterMaxDelay and cvapCodecConfigJ ...

cvapCodecConfigDtmfRelay

When this object is set to 'true', the digits will be sent as peer-to-peer packet in the bearer. When this object is set to 'false', the digits will be sent as regular voice packets in the bearer. For low complexity CODECS (such as G.711), the preferred v ...

cvapCodecConfigPayloadType

This object specifies the payload type of the CODEC in voice application as specified in RFC1890. The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during ...

cvapCodecConfigNewJtrNomDelay

This object specifies the nominal jitter buffer size. If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is fixed at this value for the duration of the call. if cvapCodecConfigJitterDelayMode is set to adaptive(1), the jitter buffer i ...

cvapSvcConfigTable

This table contains the SVC (both in AAL1 and AAL2) configuration which is used for call connection establishment between the PNNI controller and the media gateway.

cvapSvcConfigEntry

An entry containing management information for SVC connection in the media gateway. An entry of this table is created when a new media gateway is detected by media gateway application. The entry is deleted when the media gateway is removed from the system ...

cvapSvcAtmQosCellDelay

This object identifies end-to-end cell delay in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. This object is part of the extended qu ...

cvapSvcAtmQosCtd

This object identifies end-to-end maximum cell transfer in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. This value is sent in voice ...

cvapSvcAtmQosClr

This object identifies maximum Cell Loss Ratio (CLR) in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. This value is sent in voice SV ...

cvapSvcTrfScalingFactor

This object specifies Traffic Scaling Factor in computing factored bandwidth which is used in ATM signaling in voice SVC establishment. When this value is less than 100 it can be referred as a `discount factor' and when more than 100 referred as an `exces ...

cvapSvcAal2CidNumber

This object specifies the default AAL2 CID (Channel Identification) number used for AAL2 SVC connections. 0-7 is reserved.

cvapSvcAggTrafficClipping

This object defines the aggregate traffic clipping policy. This object specifies if the aggregate traffic clipping policy is applicable to all bearer traffic generated in the media gateway. The applicable options are: 'true' - aggregate traffic clipping i ...

cvapSvcAggLinkState

This object provides the state of the SVC link between PNNI controller and the media gateway. When the SVC software module fails to register NSAP address with the PNNI controller via SAPI (Service Access Point Interface), this object will be set to 'down' ...

cvapSvcPartialFillSupported

This object indicates the fill level of cells in case of AAL1 adaptation . The value of this object will be used if the call agent does not specify partial fill in the MGCP commands (i.e if L(local connection option):pf( partial fill) is absent). ATM cell ...

cvapSvcMgcpSelectorByteValue

This object specifies the selector byte value of the NSAP address for MGCP protocol. When a SVC call setup indication from the network is received, it will look at this object to determine the owner application for this setup. The value of this object can ...

cvapSvcH248SelectorByteValue

This object specifies the selector byte value of the NSAP address for H.248 protocol. When a SVC call setup indication from the network is received, it will look at this object to determine the owner application for this setup. The value of this object ca ...

cvapSvcDelNotifGuardTimer

A timer, for a duration as specified by this object, will be started when the SVC call is released from the network side. Upon expiration of this timer, the call agent is notified about this through ServiceChange message(for H.248 protocol) or through gat ...

cvapSvcMultiCIDPerSvc

This object enables the user to disable or enable the Multi-CID SVC feature on the gateway. When this object is set to 'true', multiple CIDs can be established on a single SVC. When this object is set to 'false', only one CID per SVC can be established. T ...

cvapSvcMultiCIDFillTimer

This object defines the time (millisecs) to wait for filling up the cell when the next packet is not ready. After waiting for the time configured in this object, the cell will be sent out. This object is applicable only for aal2 adaptations. Any new progr ...

cvapSvcMultiCIDCACSCR

This object specifies the SCR (Sustained Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and will determine if a new Multi-Cid SVC needs to be created for a new incoming CID, or whether ther ...

cvapSvcMultiCIDCACPCR

This object specifies the PCR (Peak Cell Rate) per Multi-CID SVC. The value of this object will be used for CAC (Call Admission Control) processing, and will determine whether an upspeed request can be accepted or not on the Multi-CID SVC. The 'cvapSvcMul ...

cvapSvcMultiCIDOriginatDelTimer

This object specifies the time to wait to delete an Originated -SVC in the case where a CID delete just occurred and the SVC has no more CIDs after the deletion. The interval of this object should be 5. The 'cvapSvcMultiCIDOriginatDelTimer' must be greate ...

cvapSvcMultiCIDTerminatDelTimer

This object specifies the time that the Terminating end can attempt to add a new CID into the Terminated-SVC after the last CID in a slave-end SVC is deleted. The interval of this object should be 5. The 'cvapSvcMultiCIDOriginatDelTimer' must be greater t ...

cvapSvcMultiCIDGlareThreshold

This object specifies the threshold at when reached on the SVC-Terminating end, that no more CID's can be added to that Terminated-SVC from the Termination end. The Originating end will be able to use the remaining CID's in the SVC.

cvapSvcStatsTable

This table contains SVC statistics associated with the communication between the media gateway and the PNNI controller.

cvapSvcStatsEntry

An entry containing statistics information for a SVC that is associated with the communication between the media gateway and the PNNI controller.

cvapSvcTxSetups

This object indicates the number of 'SETUP' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxSetups

This object indicates the number of 'SETUP' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxCallProcs

This object indicates the number of call 'PROCEED' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxCallProcs

This object indicates the number of call 'PROCEED' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxConns

This object indicates the number of 'CONNECT' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcTxConnAcks

This object indicates the number of 'CONNECT ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxConns

This object indicates the number of 'CONNECT' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcRxConnAcks

This object indicates the number of 'CONNECT ACK' messages received by the gateway from the PNNI controller since last gateway reset.

cvapSvcTxReleases

This object indicates the number of 'RELEASE' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcTxReleaseCompls

This object indicates the number of 'RELEASE COMPLETE' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxReleases

This object indicates the number of RELEASE' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcRxReleaseCompls

This object indicates the number of 'RELEASE COMPLETE' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxRestarts

This object indicates the number of 'RESTART' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcTxRestartAcks

This object indicates the number of 'RESTART ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxRestarts

This object indicates the number of 'RESTART' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcRxRestartAcks

This object indicates the number of 'RESTART ACK' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxResyncStrts

This object indicates the number of 'RESYNC START' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcTxResyncStrtAcks

This object indicates the number of 'RESYNC START ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxResyncStrts

This object indicates the number of 'RESYNC START' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcRxResyncStrtAcks

This object indicates the number of 'RESYNC START ACK' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxResyncEnds

This object indicates the number of 'RESYNC END' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcTxResyncEndAcks

This object indicates the number of 'RESYNC END ACK' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxResyncEnds

This object indicates the number of 'RESYNC END ACK' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcRxResyncEndAcks

This object indicates the number of 'RESYNC END ACK' messages received by the media gateway from the PNNI controller since last gateway reset.

cvapSvcTxBulkResyncs

This object indicates the number of 'BULK RESYNC' messages sent to the PNNI controller from the media gateway since last gateway reset.

cvapSvcRxBulkResyncs

This object indicates the number of 'BULK RESYNC' messages received by the gateway from the PNNI controller since last gateway reset.

cvapSvcCallProcExpiries

This object indicates the number of call 'PROCEED' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapSvcReleasExpiries

This object indicates the number of call 'RELEASE' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapSvcConnExpiries

This object indicates the number of call 'CONNECT' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapSvcConnAckExpiries

This object indicates the number of call 'CONNECT ACK' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapSvcRestartExpiries

This object indicates the number of call 'RESTART' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapSvcResyncExpiries

This object indicates the number of call 'RESYNC START' messages have been sent from the media gateway and have never received any response from the PNNI controller.

cvapCodecConfigGroup

This group contains objects related to CODEC configuration information.

cvapSvcConfigGroup

This group contains objects related to SVC configuration information.

cvapSvcStatsGroup

This group contains objects related to SVC statistics.

cvapCodecConfigGroupRev1

This group contains objects related to CODEC configuration information.