CISCO-VOICE-DIAL-CONTROL-MIB Download

cvGeneralPoorQoVNotificationEnable

This object indicates whether cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps should be generated for a poor quality of voice calls. If the value of this object is 'true', cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificat ...

cvGeneralFallbackNotificationEnable

This object indicates whether cvdcFallbackNotification traps should be generated for fallback. If the value of this object is 'true', cvdcFallbackNotification traps will be generated for all voice over IP peers.

cvGeneralDSCPPolicyNotificationEnable

This object indicates whether cvdcPolicyViolationNotification traps should be generated for a RPH to DSCP mapping violation for SIP voice calls. If the value of this object is 'true', cvdcPolicyViolationNotification traps will be generated for SIP voice o ...

cvGeneralMediaPolicyNotificationEnable

This object indicates whether cvdcPolicyViolationNotification traps should be generated for Media violation for SIP voice calls. If the value of this object is 'true', cvdcPolicyViolationNotification traps will be generated for SIP voice over IP peers whe ...

cvPeerCfgTable

The table contains the Voice Generic Peer information that is used to create an ifIndexed row with an appropriate ifType that is associated with the cvPeerCfgType and cvPeerCfgPeerType objects.

cvPeerCfgEntry

A single voice generic Peer. The creation of this entry will create an associated ifEntry with an ifType that is associated with cvPeerCfgType, i.e., for 'voiceEncap' encapsulation, an ifEntry will contain an ifType voiceEncap(103); for 'voiceOverIp' enca ...

cvPeerCfgIndex

An arbitrary index that uniquely identifies a generic voice peer.

cvPeerCfgIfIndex

The ifIndex of the peer associated ifEntry. The ifIndex appears after the associated ifEntry is created successfully. This ifIndex will be used to access the objects in the Voice over Telephony or Voice over IP peer specific table. In addition, the ifInde ...

cvPeerCfgType

Specifies the type of voice related encapsulation. voice - voice encapsulation (voiceEncap ifType) on the telephony network. voip - VoIP encapsulation (voiceOverIp ifType) on the IP network. mmail - Media Mail over IP encapsulation (mediaMailOverIp ifTyp ...

cvPeerCfgRowStatus

This object is used to create a new row or modify or delete an existing row in this table.

cvPeerCfgPeerType

Specifies the type of a peer. voice - peer in voice type to be defined in a voice gateway for voice calls. data - peer in data type to be defined in gateway that supports universal ports for modem/data calls and integrated ports for data calls.

cvVoicePeerCfgTable

The table contains the Voice over Telephony peer specific information that is required to accept voice calls or to which it will place them or perform various loopback tests via interface.

cvVoicePeerCfgEntry

A single Voice specific Peer. One entry per voice encapsulation. The entry is created when its associated 'voiceEncap(103)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted.

cvVoicePeerCfgSessionTarget

The object specifies the session target of the peer. Session Targets definitions: The session target has the syntax used by the IETF service location protocol. The syntax is as follows: mapping-type:type-specific-syntax the mapping-type specifies a scheme ...

cvVoicePeerCfgDialDigitsPrefix

The object specifies the prefix of the dial digits for the peer. The dial digits prefix is sent to telephony interface before the real phone number when the system places the outgoing call to the voice encapsulation peer over telephony interface.

cvVoicePeerCfgDIDCallEnable

The object enables/disables the DID call treatment for incoming DNIS digits. true - treat the incoming DNIS digits as if the digits are received from DID trunk. false - Disable DID call treatment for incoming DNIS digits.

cvVoicePeerCfgCasGroup

The object specifies the CAS group number of a CAS capable T1/E1 that is in the dialCtlPeerCfgLowerIf object of RFC2128. This object can be set to a valid CAS group number only if the dialCtlPeerCfgLowerIf contains a valid ifIndex for a CAS capable T1/E1 ...

cvVoicePeerCfgRegisterE164

This object specifies that the E.164 number specified in the dialCtlPeerCfgOriginateAddress field of the associated dialCtlPeerCfgTable entry be registered as an extension phone number of this gateway for H323 gatekeeper and/or SIP registrar.

cvVoicePeerCfgForwardDigits

This object specifies the number of dialed digits to forward to the remote destination in the setup message. The object can take the value: 0-32 number of right justified digits to forward -1 default -2 forward extra digits i.e those over and above those ...

cvVoicePeerCfgEchoCancellerTest

This object specifies which, if any, test to run in the echo canceller when a call from the network is connected. echoCancellerTestNone - do not run a test. echoCancellerG168Test2A - run ITU-T G.168 Test 2A. echoCancellerG168Test2B - run ITU-T G.168 ...

cvVoIPPeerCfgTable

The table contains the Voice over IP (VoIP) peer specific information that is required to accept voice calls or to which it will place them via IP backbone with the specified session protocol in cvVoIPPeerCfgSessionProtocol.

cvVoIPPeerCfgEntry

A single VoIP specific Peer. One entry per VoIP encapsulation. The entry is created when its associated 'voiceOverIp(104)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted.

cvVoIPPeerCfgSessionProtocol

The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone.

cvVoIPPeerCfgDesiredQoS

The object specifies the user requested Quality of Service for the call.

cvVoIPPeerCfgMinAcceptableQoS

The object specifies the minimally acceptable Quality of Service for the call.

cvVoIPPeerCfgSessionTarget

The object specifies the session target of the peer. Session Targets definitions: The session target has the syntax used by the IETF service location protocol. The syntax is as follows: mapping-type:type-specific-syntax the mapping-type specifies a scheme ...

cvVoIPPeerCfgCoderRate

This object specifies the most desirable codec of speech for the VoIP peer.

cvVoIPPeerCfgFaxRate

This object specifies the default transmit rate of FAX the VoIP peer. If the value of this object is 'none', then the Fax relay feature is disabled; otherwise the Fax relay feature is enabled.

cvVoIPPeerCfgVADEnable

This object specifies whether or not the VAD (Voice Activity Detection) voice data is continuously transmitted to IP backbone.

cvVoIPPeerCfgExpectFactor

This object specifies the user requested Expectation Factor of voice quality for the call via this peer.

cvVoIPPeerCfgIcpif

This object specifies the user requested Calculated Planning Impairment Factor (Icpif) for the call via this peer.

cvVoIPPeerCfgPoorQoVNotificationEnable

This object specifies whether cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps should be generated for the call that is associated with this peer.

cvVoIPPeerCfgUDPChecksumEnable

This object specifies whether the outgoing voice related UDP packet contains a valid checksum value. true - enable the checksum of outgoing voice UDP packets false - disable the checksum of outgoing voice UDP packets

cvVoIPPeerCfgIPPrecedence

This object specifies the value to be stored in the IP Precedence field of voice packets, with values ranging from 0 (normal precedence) through 7 (network control), allowing the managed system to set the importance of each voice packet for delivering the ...

cvVoIPPeerCfgTechPrefix

This object specifies the technology prefix of the peer, The technology prefix and the called party address are passed in Admission Request (ARQ) to gatekeeper for the called party address resolution during call setup.

cvVoIPPeerCfgDigitRelay

This object specifies the methods to transmit dial digits (DTMF or MF digits) via IP network. rtpCisco - Enable capability to transmit dial digits with Cisco proprietary RTP payload type. h245Signal - Enable capability to transmit dtmf digits ac ...

cvVoIPPeerCfgCoderBytes

This object specifies the size of the voice payload sample to be produced by the coder specified in cvVoIPPeerCfgCoderRate. Each coder sample produces 10 bytes of voice payload. The specified value will be rounded down to the nearest valid size. A value o ...

cvVoIPPeerCfgFaxBytes

This object specifies the payload size to be produced by the coder when it is generating fax data. A value of 0, specifies that the coder specified in cvVoIPCfgPeerCoderRate should produce its default fax payload size.

cvVoIPPeerCfgInBandSignaling

This object specifies the type of in-band signaling that will be used between the end points of the call. It is used by the router to determine how to interpret ABCD signaling bits sent as part of voice payload data.

cvVoIPPeerCfgMediaSetting

This object specifies how the media is to be setup on an IP-IP Gateway. Two choices are valid: flow-through and flow-around. When in flow-through mode, which is the default setting, the IP-IP Gateway will terminate and then re-originate the media stream. ...

cvVoIPPeerCfgDesiredQoSVideo

The object specifies the user requested Quality of Service for the video portion of the call.

cvVoIPPeerCfgMinAcceptableQoSVideo

The object specifies the minimally acceptable Quality of Service for the video portion of the call.

cvVoIPPeerCfgRedirectip2ip

This object specifies the Inbound VoIP calls that match an outbound VoIP dialpeer will be responded with a SIP redirect(for inbound SIP) or H.450.3 call-forward(for inbound H.323).

cvVoIPPeerCfgOctetAligned

If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum.

cvVoIPPeerCfgBitRates

This object indicates modes of Bit rates. One or more upto four modes can be configured at the same time as bit rates can be changed dynamically for AMR-NB codec. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAm ...

cvVoIPPeerCfgCRC

If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiat ...

cvVoIPPeerCfgCoderMode

This object indicates the iLBC codec mode to be used. The value of this object is valid only if cvVoIPPeerCfgCoderRate is equal to 'iLBC'.

cvVoIPPeerCfgCodingMode

This object specifies the coding mode to be used. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'. Following coding modes are supported: adaptive (1) - adaptive mode where iSAC performs bandwidth estimation and adapts to the availab ...

cvVoIPPeerCfgBitRate

This object specifies the target bit rate. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'.

cvVoIPPeerCfgFrameSize

This object specifies the frame size used. The object is instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'. The frame size can be 30 ms or 60 ms, and it can be fixed for all packets or vary depending on the configuration and bandwidth estimation. Thus ...

cvVoIPPeerCfgDSCPPolicyNotificationEnable

This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for RPH to DSCP mapping and policing feature.

cvVoIPPeerCfgMediaPolicyNotificationEnable

This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for Media policing feature..

cvPeerCommonCfgTable

The table contains the Voice specific peer common configuration information that is required to accept voice calls or to which it will place them or process the incoming calls.

cvPeerCommonCfgEntry

A single Voice specific Peer. One entry per voice related encapsulation. The entry is created when a voice related encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted.

cvPeerCommonCfgIncomingDnisDigits

The object specifies the prefix of the incoming Dialed Number Identification Service (DNIS) digits for the peer. The DNIS digits prefix is used to match with the incoming DNIS number for incoming call discrimination. If the digits in this object are match ...

cvPeerCommonCfgMaxConnections

The object specifies the maximum allowed connection to/from the peer. A value of -1 disables the limit of maximum connections.

cvPeerCommonCfgApplicationName

The object specifies the application to handle the incoming call after the peer is selected. If no application name is specified, then the default session application will take care of the incoming call.

cvPeerCommonCfgPreference

This object specifies the selection preference of a peer when multiple peers are matched to the selection criteria. The value of 0 has the lowest preference for peer selection.

cvPeerCommonCfgHuntStop

This object specifies whether dialpeer hunting should stop when this peer is reached.

cvPeerCommonCfgDnisMappingName

The object specifies a Dialer Number Identification Service (DNIS) map name for the Voice specific peer entry specified in this row. A DNIS is a called party number and they can be grouped and identified by DNIS map.

cvPeerCommonCfgSourceCarrierId

The object specifies the Source Carrier Id for the peer. The Source Carrier Id is used to match with the Source Carrier Id of a call. If the Source Carrier Id in this object is matched with the Source Carrier Id of a call, then the associated peer will be ...

cvPeerCommonCfgTargetCarrierId

The object specifies the Target Carrier Id for the peer. The Target Carrier Id is used to match with the Target Carrier Id of a call. If the Target Carrier Id in this object is matched with the Target Carrier Id of a call, then the associated peer will be ...

cvPeerCommonCfgSourceTrunkGrpLabel

The object specifies the Source Trunk Group Label for the peer. The Source Trunk Group Label is used to match with the Source Trunk Group Label of a call. If the Source Trunk Group Label in this object is matched with the Source Trunk Group Label of a cal ...

cvPeerCommonCfgTargetTrunkGrpLabel

The object specifies the Target Trunk Group Label for the peer. The Target Trunk Group Label is used to match with the Target Trunk Group Label of a call. If the Target Trunk Group Label in this object is matched with the Target Trunk Group Label of a cal ...

cvCallActiveTable

This table is the voice extension to the call active table of IETF Dial Control MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface.

cvCallActiveEntry

The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its ...

cvCallActiveConnectionId

The global connection identifier for the active telephony leg of the call.

cvCallActiveTxDuration

Duration of Transmit path open from this peer to the voice gateway for the call leg. This counter object will lock at the maximum value which is approximately two days.

cvCallActiveVoiceTxDuration

Duration of voice transmitted from this peer to voice gateway for this call leg. The Voice Utilization Rate can be obtained by dividing this by cvCallActiveTXDuration object. This counter object will lock at the maximum value which is approximately two da ...

cvCallActiveFaxTxDuration

Duration of fax transmitted from this peer to voice gateway for this call leg. The FAX Utilization Rate can be obtained by dividing this by cvCallActiveTXDuration object. This counter object will lock at the maximum value which is approximately two days.

cvCallActiveCoderTypeRate

The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call.

cvCallActiveNoiseLevel

The object contains the active noise level for the call leg.

cvCallActiveACOMLevel

The object contains the sum of Echo Return Loss (ERL), cancellation loss (Echo Return Loss Enhancement) and nonlinear processing loss for the call leg. The value -1 indicates the level can not be determined or level detection is disabled.

cvCallActiveOutSignalLevel

The object contains the active output signal level to telephony interface that is used by the call leg.

cvCallActiveInSignalLevel

The object contains the active input signal level from telephony interface that is used by the call leg.

cvCallActiveERLLevel

The object contains the current Echo Return Loss (ERL) level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled.

cvCallActiveSessionTarget

The object specifies the session target of the peer that is used for the call leg. This object is set with the information in the call associated cvVoicePeerCfgSessionTarget object when the call is connected.

cvCallActiveImgPageCount

The number of FAX related image pages are received or transmitted via the peer for the call leg.

cvCallActiveCallingName

The calling party name of the call. If the name is not available, then it will have a length of zero.

cvCallActiveCallerIDBlock

The object indicates whether or not the caller ID feature is blocked for this call.

cvCallActiveEcanReflectorLocation

The location in milliseconds of the largest amplitude reflector detected by the echo canceller for this call. The value 0 indicates there is no reflector or the information is not available.

cvCallActiveAccountCode

The object indicates the account code input to the call. It could be used for call screen or by down stream server for billing purpose. The value of empty string indicates no account code input.

cvCallActiveERLLevelRev1

The object contains the current Echo Return Loss (ERL) level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled.

cvCallActiveCallId

This object represents the call identifier for the active telephony leg of the call.

cvVoIPCallActiveTable

This table is the VoIP extension to the call active table of IETF Dial Control MIB. It contains VoIP call leg information about specific VoIP call destination and the selected QoS for the call leg.

cvVoIPCallActiveEntry

The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call ...

cvVoIPCallActiveConnectionId

The global connection identifier for the active VoIP leg of the call.

cvVoIPCallActiveRemoteIPAddress

Remote system IP address for the VoIP call.

cvVoIPCallActiveRemoteUDPPort

Remote system UDP listener port to which to transmit voice packets.

cvVoIPCallActiveRoundTripDelay

The voice packet round trip delay between local and the remote system on the IP backbone during the call.

cvVoIPCallActiveSelectedQoS

The selected RSVP QoS for the voice call.

cvVoIPCallActiveSessionProtocol

The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone.

cvVoIPCallActiveSessionTarget

The object specifies the session target of the peer that is used for the call. This object is set with the information in the call associated cvVoIPPeerCfgSessionTarget object when the voice over IP call is connected.

cvVoIPCallActiveOnTimeRvPlayout

Duration of voice playout from data received on time for this call. This plus the durations for the GapFills in the following entries gives the Total Voice Playout Duration for Active Voice. This does not include duration for which no data was sent by the ...

cvVoIPCallActiveGapFillWithSilence

Duration of voice signal replaced with signal played out during silence due to voice data not received on time (or lost) from voice gateway this call. This counter object will lock at the maximum value which is approximately two days.

cvVoIPCallActiveGapFillWithPrediction

Duration of voice signal played out with signal synthesized from parameters or samples of data preceding in time due to voice data not received on time (or lost) from voice gateway for this call. An example of such playout is frame-erasure or frame-concea ...

cvVoIPCallActiveGapFillWithInterpolation

Duration of voice signal played out with signal synthesized from parameters or samples of data preceding and following in time due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum ...

cvVoIPCallActiveGapFillWithRedundancy

Duration of voice signal played out with signal synthesized from redundancy parameters available due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately t ...

cvVoIPCallActiveHiWaterPlayoutDelay

The high water mark Voice Playout FIFO Delay during the voice call. This counter object will lock at the maximum value which is approximately two days.

cvVoIPCallActiveLoWaterPlayoutDelay

The low water mark Voice Playout FIFO Delay during the voice call.

cvVoIPCallActiveReceiveDelay

The average Playout FIFO Delay plus the decoder delay during the voice call.

cvVoIPCallActiveVADEnable

The object indicates whether or not the VAD (Voice Activity Detection) was enabled for the voice call.

cvVoIPCallActiveCoderTypeRate

The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call. This rate is different from the configuration rate because of rate negotiation during the call.

cvVoIPCallActiveLostPackets

The number of lost voice packets during the call.

cvVoIPCallActiveEarlyPackets

The number of received voice packets that arrived too early to store in jitter buffer during the call.

cvVoIPCallActiveLatePackets

The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.

cvVoIPCallActiveUsername

The textual identifier of the calling party (user) of the call. If the username is not available, then the value of this object will have a length of zero.

cvVoIPCallActiveProtocolCallId

The protocol-specific call identifier for the VoIP call.

cvVoIPCallActiveRemSigIPAddrT

This object specifies the type of address contained in the associated instance of cvVoIPCallActiveRemSigIPAddr.

cvVoIPCallActiveRemSigIPAddr

Remote signalling IP address for the VoIP call.

cvVoIPCallActiveRemSigPort

Remote signalling listener port to which to transmit voice packets.

cvVoIPCallActiveRemMediaIPAddrT

This object specifies the type of address contained in the associated instance of cvVoIPCallActiveRemMediaIPAddr.

cvVoIPCallActiveRemMediaIPAddr

Remote media end point IP address for the VoIP call.

cvVoIPCallActiveRemMediaPort

Remote media end point listener port to which to transmit voice packets.

cvVoIPCallActiveSRTPEnable

The object indicates whether or not the SRTP (Secured RTP) was enabled for the voice call.

cvVoIPCallActiveOctetAligned

If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveBitRates

This object indicates modes of Bit rates. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveModeChgPeriod

The object indicates the interval (N frame-blocks) at which codec mode changes are allowed. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveModeChgNeighbor

If the object has a value of true(1), mode changes will be made to only neighboring modes set to cvVoIPCallActiveBitRates object. If the value is false(2), mode changes will be allowed to any modes set to cvVoIPCallActiveBitRates object. This object is no ...

cvVoIPCallActiveMaxPtime

The object indicates the maximum amount of media that can be encapsulated in a payload. Supported value is 20 msec. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveCRC

If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiat ...

cvVoIPCallActiveRobustSorting

If the object has a value of true(1), payload employs robust sorting and if the value is false(2), payload does not employ robust sorting. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object ...

cvVoIPCallActiveEncap

The object indicates the RTP encapsulation type. Supported RTP encapsulation type is RFC3267. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveInterleaving

The object indicates the maximum number of frame-blocks allowed in an interleaving group. It indicates that frame-block level interleaving will be used for that session. If this object is not set, interleaving is not used. This object is applicable only w ...

cvVoIPCallActivePtime

The object indicates the length of the time in milliseconds represented by the media of the packet. Supported value is 20 milliseconds. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveChannels

The object indicates the number of audio channels. Supported value is 1. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallActiveCoderMode

The object indicates the iLBC codec mode. The value of this object is valid only if cvVoIPCallActiveCoderTypeRate is equal to 'iLBC'.

cvVoIPCallActiveCallId

This object represents the call identifier for the active VoIP leg of the call.

cvVoIPCallActiveCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call may or may not have a valid call reference ID (i.e. value greater than zero), but in both cases, there will not be a video call entry asso ...

ccVoIPCallActivePolicyName

This object holds the policy name. It could be media policy, DSCP policy etc.

cvVoIPCallActiveReversedDirectionPeerAddress

This object store the reversed direction peer address If the address is not available, then it will have a length of zero. If the call is ingress then it contains called number and if the call is egress then it contains calling number.

cvCallActiveDS0s

The current number of DS0 interfaces used for the active calls.

cvCallActiveDS0sHighThreshold

A high threshold used to determine when to generate the cvdcActiveDS0sHighNotification. This object represents the percentage of active DS0s in total number of DS0s.

cvCallActiveDS0sLowThreshold

A low threshold used to determine when to generate the cvdcActiveDS0sLowNotification notification. This object represents the percentage of active DS0s in total number of DS0s.

cvCallActiveDS0sHighNotifyEnable

Specifies whether or not cvdcActiveDS0sHighNotification should be generated. 'true' : Indicates that the cvdcActiveDS0sHighNotification generation is enabled. 'false': Indicates that cvdcActiveDS0sHighNotification generation is disabled.

cvCallActiveDS0sLowNotifyEnable

Specifies whether or not cvdcActiveDS0sLowNotification should be generated. 'true' : Indicates that the cvdcActiveDS0sLowNotification generation is enabled. 'false': Indicates that cvdcActiveDS0sLowNotification generation is disabled.

cvCallVolConnTable

This table represents the number of active call connections for each call connection type in the voice gateway.

cvCallVolConnEntry

An entry in the cvCallVolConnTable indicates number of active calls for a call connection type in the voice gateway.

cvCallVolConnIndex

This object represents index to the cvCallVolConnTable.

cvCallVolConnActiveConnection

This object represents the total number of active calls for a connection type in the voice gateway.

cvCallVolConnTotalActiveConnections

This object represents the total number of active call legs in the voice gateway.

cvCallVolConnMaxCallConnectionLicenese

This object represents the licensed call capacity for a voice gateway. If the value is 0, no licensing is done and the gateway can be accomodate as many calls depending on its capability.

cvCallVolPeerTable

This table represents the information about the usage of dialpeers configured in a voice gateway.

cvCallVolPeerEntry

Each entry represents a row in cvCallVolPeerTable and corresponds to the information about a dialpeer configured on the voice gateway.

cvCallVolPeerIncomingCalls

This object represents the total number of active calls that has selected the dialpeer as an incoming dialpeer.

cvCallVolPeerOutgoingCalls

This object represents the total number of active calls that has selected the dialpeer as an outgoing dialpeer.

cvCallVolIfTable

This table represents the information about the usage of an IP interface in a voice gateway for voice media calls. This table has a sparse-dependent relationship with ifTable. There exists an entry in this table, for each of the entries in ifTable where ...

cvCallVolIfEntry

Each entry represents a row in cvCallVolIfTable and corresponds to the information about an IP interface in the voice gateway.

cvCallVolMediaIncomingCalls

This object represents the total number of inbound active media calls through this IP interface.

cvCallVolMediaOutgoingCalls

This object represents the total number of outbound active media calls through the IP interface.

cvCallRateMonitorEnable

This object represents the state of call-monitoring. A value of 'true' indicates that call-monitoring is enabled. A value of 'false' indicates that call-monitoring is disabled.

cvCallRateMonitorTime

This object represents the interval for which the gateway monitors the call-rate.

cvCallRate

This object represents the total number of calls handled by the gateway during the monitored time.

cvCallRateHiWaterMark

This object represents the high water mark for the number of calls handled by the gateway in an unit interval of cvCallRateMonitorTime, from the time the call-monitoring is enabled.

cvCallHistoryTable

This table is the voice extension to the call history table of IETF Dial Control MIB. It contains voice encapsulation call leg information such as voice packet statistics, coder usage and end to end bandwidth of the call leg.

cvCallHistoryEntry

The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its ...

cvCallHistoryConnectionId

The global connection identifier for the telephony leg, which was assigned to the call.

cvCallHistoryTxDuration

Duration of Transmit path open from this peer to the voice gateway for the call leg. This counter object will lock at the maximum value which is approximately two days.

cvCallHistoryVoiceTxDuration

Duration for this call leg. The Voice Utilization Rate can be obtained by dividing this by cvCallHistoryTXDuration object. This counter object will lock at the maximum value which is approximately two days.

cvCallHistoryFaxTxDuration

Duration of fax transmitted from this peer to voice gateway for this call leg. The FAX Utilization Rate can be obtained by dividing this by cvCallHistoryTXDuration object. This counter object will lock at the maximum value which is approximately two days.

cvCallHistoryCoderTypeRate

The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call.

cvCallHistoryNoiseLevel

The object contains the average noise level for the call leg.

cvCallHistoryACOMLevel

The object contains the average ACOM level for the call leg. The value -1 indicates the level can not be determined or level detection is disabled.

cvCallHistorySessionTarget

The object specifies the session target of the peer that is used for the call leg via telephony interface.

cvCallHistoryImgPageCount

The number of FAX related image pages are received or transmitted via the peer for the call leg.

cvCallHistoryCallingName

The calling party name of the call. If the name is not available, then it will have a length of zero.

cvCallHistoryCallerIDBlock

The object indicates whether or not the caller ID feature is blocked for this call.

cvCallHistoryAccountCode

The object indicates the account code input to the call. It could be used by down stream billing server. The value of empty string indicates no account code input.

cvCallHistoryCallId

This object represents the call identifier for the telephony leg, which was assigned to the call.

cvVoIPCallHistoryTable

This table is the VoIP extension to the call history table of IETF Dial Control MIB. It contains VoIP call leg information about specific VoIP call destination and the selected QoS for the call leg.

cvVoIPCallHistoryEntry

The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by Call Active table of IETF Dial Control MIB to identify the call. An entry of this table is created when its associated call ...

cvVoIPCallHistoryConnectionId

The global connection identifier for the VoIP leg, which was assigned to the call.

cvVoIPCallHistoryRemoteIPAddress

Remote system IP address for the call.

cvVoIPCallHistoryRemoteUDPPort

Remote system UDP listener port to which to transmit voice packets for the call.

cvVoIPCallHistoryRoundTripDelay

The voice packet round trip delay between local and the remote system on the IP backbone during the call.

cvVoIPCallHistorySelectedQoS

The selected RSVP QoS for the call.

cvVoIPCallHistorySessionProtocol

The object specifies the session protocol to be used for Internet call between local and remote router via IP backbone.

cvVoIPCallHistorySessionTarget

The object specifies the session target of the peer that is used for the Voice over IP call.

cvVoIPCallHistoryOnTimeRvPlayout

Duration of voice playout from data received on time for this call. This plus the durations for the GapFills in the following entries gives the Total Voice Playout Duration for Active Voice. This does not include duration for which no data was sent by the ...

cvVoIPCallHistoryGapFillWithSilence

Duration of voice signal replaced with signal played out during silence due to voice data not received on time (or lost) from voice gateway this call. This counter object will lock at the maximum value which is approximately two days.

cvVoIPCallHistoryGapFillWithPrediction

Duration of voice signal played out with signal synthesized from parameters or samples of data preceding in time due to voice data not received on time (or lost) from voice gateway for this call. An example of such playout is frame-erasure or frame-conce ...

cvVoIPCallHistoryGapFillWithInterpolation

Duration of voice signal played out with signal synthesized from parameters or samples of data preceding and following in time due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum ...

cvVoIPCallHistoryGapFillWithRedundancy

Duration of voice signal played out with signal synthesized from redundancy parameters available due to voice data not received on time (or lost) from voice gateway for this call. This counter object will lock at the maximum value which is approximately t ...

cvVoIPCallHistoryHiWaterPlayoutDelay

The high water mark Voice Playout FIFO Delay during the voice call. This counter object will lock at the maximum value which is approximately two days.

cvVoIPCallHistoryLoWaterPlayoutDelay

The low water mark Voice Playout FIFO Delay during the voice call.

cvVoIPCallHistoryReceiveDelay

The average Playout FIFO Delay plus the decoder delay during the voice call.

cvVoIPCallHistoryVADEnable

The object indicates whether or not the VAD (Voice Activity Detection) was enabled for the voice call.

cvVoIPCallHistoryCoderTypeRate

The negotiated coder rate. It specifies the transmit rate of voice/fax compression to its associated call leg for the call. This rate is different from the configuration rate because of rate negotiation during the call.

cvVoIPCallHistoryIcpif

The Calculated Planning Impairment Factor (Icpif) of the call that is associated to this call leg. The value in this object is computed by the following equation. Icpif of the call = Itotal (total impairment value) of the call - A (Expectation Factor) in ...

cvVoIPCallHistoryLostPackets

The number of lost voice packets during the call.

cvVoIPCallHistoryEarlyPackets

The number of received voice packets that are arrived too early to store in jitter buffer during the call.

cvVoIPCallHistoryLatePackets

The number of received voice packets that are arrived too late to playout with CODEC (Coder/Decoder) during the call.

cvVoIPCallHistoryUsername

The textual identifier of the calling party (user) of the call. If the username is not available, then the value of this object will have a length of zero.

cvVoIPCallHistoryProtocolCallId

The protocol-specific call identifier for the VoIP call.

cvVoIPCallHistoryRemSigIPAddrT

This object specifies the type of address contained in the associated instance of cvVoIPCallHistoryRemSigIPAddr.

cvVoIPCallHistoryRemSigIPAddr

Remote signalling IP address for the VoIP call.

cvVoIPCallHistoryRemSigPort

Remote signalling listener port to which to transmit voice packets.

cvVoIPCallHistoryRemMediaIPAddrT

This object specifies the type of address contained in the associated instance of cvVoIPCallHistoryRemMediaIPAddr.

cvVoIPCallHistoryRemMediaIPAddr

Remote media end point IP address for the VoIP call.

cvVoIPCallHistoryRemMediaPort

Remote media end point listener port to which to transmit voice packets.

cvVoIPCallHistorySRTPEnable

The object indicates whether or not the SRTP (Secured RTP) was enabled for the voice call.

cvVoIPCallHistoryFallbackIcpif

The Calculated Planning Impairment Factor (Icpif) of the call that is associated to this call leg. The value in this object is computed by the following equation. Icpif of the fallback probe = Itotal (total impairment value) - configured fallback (Expec ...

cvVoIPCallHistoryFallbackLoss

FallbackLoss is the percentage of loss packets based on the total packets sent.

cvVoIPCallHistoryFallbackDelay

The FallbackDelay is calculated as follows - Take the sum of the round trips for all the probes, divide by the number of probes, and divide by two to get the one-way delay. Then add in jitter_in or jiter_out, which ever is higher.

cvVoIPCallHistoryOctetAligned

If the object has a value true(1) octet align operation is used, and if the value is false(2), bandwidth efficient operation is used. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryBitRates

This object indicates modes of Bit rates. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryModeChgPeriod

The object indicates the interval (N frame-blocks) at which codec mode changes are allowed. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryModeChgNeighbor

If the object has a value of true(1), mode changes will be made to only neighboring modes set to cvVoIPCallHistoryBitRates object. If the value is false(2), mode changes will be allowed to any modes set to cvVoIPCallHistoryBitRates object. This object is ...

cvVoIPCallHistoryMaxPtime

The object indicates the maximum amount of media that can be encapsulated in a payload. Supported value is 20 msec. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryCRC

If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiat ...

cvVoIPCallHistoryRobustSorting

If the object has a value of true(1), payload employs robust sorting and if the value is false(2), payload does not employ robust sorting. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object ...

cvVoIPCallHistoryEncap

The object indicates the RTP encapsulation type. Supported RTP encapsulation type is RFC3267. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryInterleaving

The object indicates the maximum number of frame-blocks allowed in an interleaving group. It indicates that frame-block level interleaving will be used for that session. If this object is not set, interleaving is not used. This object is applicable only w ...

cvVoIPCallHistoryPtime

The object indicates the length of the time in milliseconds represented by the media of the packet. Supported value is 20 milliseconds. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryChannels

The object indicates the number of audio channels. Supported value is 1. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

cvVoIPCallHistoryCoderMode

The object indicates the iLBC mode. The value of this object is valid only if cvVoIPCallHistoryCoderTypeRate is equal to 'iLBC'.

cvVoIPCallHistoryCallId

This object represents the call identifier for the VoIP leg, which was assigned to the call.

cvVoIPCallHistoryCallReferenceId

The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call may or may not have a valid call reference ID (i.e. value greater than zero), but in both cases, there will not be a video call entry asso ...

cvdcGeneralCfgGroup

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoiceCfgGroup

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvdcVoIPCfgGroup

A collection of objects providing the VoIP Dial Control configuration capability.

cvCallGroup

A collection of objects providing the GSTN (General Switched Telephony Network Voice Call capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit switched over the TDM inf ...

cvVoIPCallGroup

A collection of objects providing the VoIP Call capability.

cvdcGeneralCfgGroupRev1

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoiceCfgGroupRev1

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvVoIPCallGroupRev1

A collection of objects providing the VoIP Call capability.

cvCallGroupRev1

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvdcGeneralCfgGroupRev2

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoIPCfgGroupRev1

A collection of objects providing the VoIP Dial Control configuration capability.

cvdcGeneralCfgGroupRev3

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoiceCfgGroupRev2

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvdcVoIPCfgGroupRev2

A collection of objects providing the VoIP Dial Control configuration capability.

cvVoIPCallGroupRev3

A collection of objects providing the VoIP Call capability.

cvCallGroupRev2

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvdcGeneralCfgGroupRev4

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvVoIPCallGroupRev4

A collection of objects providing the VoIP Call capability.

cvdcVoIPCfgGroupRev3

A collection of objects providing the VoIP Dial Control configuration capability.

cvdcGeneralCfgGroupRev5

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoIPCfgGroupRev4

A collection of objects providing the VoIP Dial Control configuration capability.

cvCallGroupRev3

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvCallGroupRev4

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvVoIPCallGroupRev5

A collection of objects providing the VoIP Call capability.

cvCallGroupRev5

A collection of objects providing the GSTN (General Switched Telephony Network Voice Dial Control configuration capability. GSTN (General Switched Telephony Network), which is supposed to encompass analog, ISDN, Cellular - essentially anything circuit swi ...

cvVoIPCallGroupRev6

A collection of objects providing the VoIP Call capability.

cvdcGeneralCfgGroupRev6

A collection of objects providing the general Voice Gateway Call Dial Control configuration capability.

cvdcVoIPCfgAmrNbGroup

A collection of objects providing the VoIP Dial Control configuration capability for GSM AMR-NB codec.

cvVoIPCallAmrNbGroup

A collection of objects providing GSM AMR-NB codec related information.

cvdcVoIPCfgIlbcGroup

A collection of objects providing the VoIP Dial Control configuration capability for iLBC codec.

cvVoIPCallIlbcGroup

A collection of objects providing iLBC codec related information.

cvCallGroupSup1

This group supplements cvCallGroup to provide the call identifier for the telephony leg of the gateway call.

cvVoIPCallGroupSup1

This group supplements cvVoIPCallGroup to provide the call identifier for the VoIP leg of the gateway call. The group cvVoIPCallGroupSup1 is deprecated and replaced by cvVoIPCallGroupSup2.

cvCallVolumeGroup

This group provides the information about the call-volume in the voice gateway.

cvCallRateMonitorGroup

This group represents the objects used to monitor the call-rate.

cvdcVoIPCfgISACGroup

A collection of objects providing iSAC codec related information.

cvVoIPCallGroupSup2

This group supplements cvVoIPCallGroup to provide the call identifier and policy for the VoIP leg of the gateway call.