CISCO-VTP-MIB Download

vtpVersion

The version of VTP in use on the local system. A device will report its version capability and not any particular version in use on the device. If the device does not support vtp, the version is none(3).

vtpMaxVlanStorage

An estimate of the maximum number of VLANs about which the local system can recover complete VTP information after a reboot. If the number of defined VLANs is greater than this value, then the system can not act as a VTP Server. For a device which has no ...

vtpNotificationsEnabled

An indication of whether the notifications/traps defined by the vtpConfigNotificationsGroup, vtpConfigNotificationsGroup2, and vtpConfigNotificationsGroup8 are enabled.

vtpVlanCreatedNotifEnabled

An indication of whether the notification should be generated when a VLAN is created. If the value of this object is 'true' then the vtpVlanCreated notification will be generated. If the value of this object is 'false' then the vtpVlanCreated notification ...

vtpVlanDeletedNotifEnabled

An indication of whether the notification should be generated when a VLAN is deleted. If the value of this object is 'true' then the vtpVlanDeleted notification will be generated. If the value of this object is 'false' then the vtpVlanDeleted notification ...

managementDomainTable

The table containing information on the management domains in which the local system is participating. Devices which support only one management domain will support just one row in this table, and will not let it be deleted nor let other rows be created. ...

managementDomainEntry

Information about the status of one management domain.

managementDomainIndex

An arbitrary value to uniquely identify the management domain on the local system.

managementDomainName

The management name of a domain in which the local system is participating. The zero-length name corresponds to the 'no management-domain' state which is the initial value at installation-time if not configured otherwise. Note that the zero-length name ...

managementDomainLocalMode

The local VTP mode in this management domain when managementDomainVersionInUse is version1(1) or version2(2). If managementDomainVersionInUse is version3(4), this object has the same value with vtpDatabaseLocalMode of VLAN database type. - 'client' indica ...

managementDomainConfigRevNumber

The current Configuration Revision Number as known by the local device for this management domain when managementDomainVersionInUse is version1(1) or version2(2). If managementDomainVersionInUse is version3(4), this object has the same value with vtpDatab ...

managementDomainLastUpdater

The IP-address (or one of them) of the VTP Server which last updated the Configuration Revision Number, as indicated in the most recently received VTP advertisement for this management domain, when managementDomainVersionInUse is version1(1) or version2(2 ...

managementDomainLastChange

The time at which the Configuration Revision Number was (last) increased to its current value, as indicated in the most recently received VTP advertisement for this management domain when managementDomainVersionInUse is not version3(4) or in the most rece ...

managementDomainRowStatus

The status of this conceptual row.

managementDomainTftpServer

The IP address of a TFTP Server in/from which VTP VLAN information for this management domain is to be stored/retrieved. If the information is being locally stored in NVRAM, this object should take the value 0.0.0.0.

managementDomainTftpPathname

The complete pathname of the file at the TFTP Server identified by the value of managementDomainTftpServer in/from which VTP VLAN information for this management domain is to be stored/retrieved. If the value of corresponding instance of managementDomain ...

managementDomainPruningState

An indication of whether VTP pruning is enabled or disabled in this managament domain. This object can only be modified, either when the corresponding instance value of managementDomainVersionInUse is 'version1' or 'version2' and the corresponding instanc ...

managementDomainVersionInUse

The current version of the VTP that is in use by the designated management domain. This object can be set to none(3) only when vtpVersion is none(3).

managementDomainPruningStateOper

Indicates whether VTP pruning is operationally enabled or disabled in this managament domain.

vtpVlanTable

This table contains information on the VLANs which currently exist.

vtpVlanEntry

Information about one current VLAN. The managementDomainIndex value in the INDEX clause indicates which management domain the VLAN is in.

vtpVlanIndex

The VLAN-id of this VLAN on ISL or 802.1q trunks.

vtpVlanState

The state of this VLAN. The state 'mtuTooBigForDevice' indicates that this device cannot participate in this VLAN because the VLAN's MTU is larger than the device can support. The state 'mtuTooBigForTrunk' indicates that while this VLAN's MTU is supported ...

vtpVlanType

The type of this VLAN.

vtpVlanName

The name of this VLAN. This name is used as the ELAN-name for an ATM LAN-Emulation segment of this VLAN.

vtpVlanMtu

The MTU size on this VLAN, defined as the size of largest MAC-layer (information field portion of the) data frame which can be transmitted on the VLAN.

vtpVlanDot10Said

The value of the 802.10 SAID field for this VLAN.

vtpVlanRingNumber

The ring number of this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of 'fddi' or 'tokenRing' and Source Routing is in use on this VLAN.

vtpVlanBridgeNumber

The bridge number of the VTP-capable switches for this VLAN. This object is only instantiated for VLANs that are involved with emulating token ring segments.

vtpVlanStpType

The type of the Spanning Tree Protocol (STP) running on this VLAN. This object is only instanciated when the value of the corresponding instance of vtpVlanType has a value of 'fddiNet' or 'trNet'. The value returned by this object depends upon the value ...

vtpVlanParentVlan

The parent VLAN for this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of 'fddi' or 'tokenRing' and Source Routing is in use on this VLAN. The parent VLAN must have a vtpVlanType value of ...

vtpVlanTranslationalVlan1

A VLAN to which this VLAN is being translational-bridged. If this value and the corresponding instance of vtpVlanTranslationalVlan2 are both zero, then this VLAN is not being translational-bridged.

vtpVlanTranslationalVlan2

Another VLAN, i.e., other than that indicated by vtpVlanTranslationalVlan1, to which this VLAN is being translational-bridged. If this value and the corresponding instance of vtpVlanTranslationalVlan1 are both zero, then this VLAN is not being translatio ...

vtpVlanBridgeType

The type of the Source Route bridging mode in use on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on this VLAN.

vtpVlanAreHopCount

The maximum number of bridge hops allowed in All Routes Explorer frames on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on this ...

vtpVlanSteHopCount

The maximum number of bridge hops allowed in Spanning Tree Explorer frames on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on t ...

vtpVlanIsCRFBackup

True if this VLAN is of type trCrf and also is acting as a backup trCrf for the ISL distributed BRF

vtpVlanTypeExt

The additional type information of this VLAN.

vtpVlanIfIndex

The value of the ifIndex corresponding to this VLAN ID. If the VLAN ID does not have its corresponding interface, this object has the value of zero.

vtpInternalVlanAllocPolicy

The internal VLAN allocation policy. 'ascending' - internal VLANs are allocated starting from a lowwer VLAN ID and upwards. 'descending' - internal VLANs are allocated starting from a higher VLAN ID and downwards.

vtpInternalVlanTable

A vtpInternalVlanTable entry contains information on an existing internal VLAN. It is internally created by the device for a specific application program and hence owned by the application. It cannot be modified or deleted by (local or network) management ...

vtpInternalVlanEntry

Information about one current internal VLAN.

vtpInternalVlanOwner

The program name of the internal VLAN's owner application. This internal VLAN is allocated by the device specifically for this application and no one else could create, modify or delete this VLAN.

vtpEditControlTable

This table provides the means to control the editing of the VLANs for a particular management domain. Each and every entry in this table augments its corresponding entry in the managementDomainTable; thus, an entry in this table is created/deleted only a ...

vtpEditControlEntry

Control information for editing the VLANs in one management domain.

vtpVlanEditOperation

This object always has the value 'none' when read. When written, each value causes the appropriate action: 'copy' - causes the creation of rows in the vtpVlanEditTable exactly corresponding to the current global VLAN information for this management domai ...

vtpVlanApplyStatus

The current status of an 'apply' operation to instanciate the Edit Buffer as the new global VLAN information (for this management domain). If no apply is currently active, the status represented is that of the most recently completed apply. The possible ...

vtpVlanEditBufferOwner

The management station which is currently using the Edit Buffer for this management domain. When the Edit Buffer for a management domain is not currently in use, the value of this object is the zero-length string. Note that it is also the zero-length st ...

vtpVlanEditConfigRevNumber

The Configuration Revision Number to be used for the next apply operation. This value is initialized (by the agent) on a copy operation to be one greater than the value of managementDomainConfigRevNumber. On an apply, if the number is less or equal to th ...

vtpVlanEditModifiedVlan

The VLAN-id of the modified VLAN in the Edit Buffer. If the object has the value of zero, any VLAN can be edited. If the value of the object is not zero, only this VLAN can be edited. The object's value is reset to zero after a successful 'apply' operatio ...

vtpVlanEditTable

The table which contains the information in the Edit Buffers, one Edit Buffer per management domain. The information for a particular management domain is initialized, by a 'copy' operation, to be the current global VLAN information for that management d ...

vtpVlanEditEntry

Information about one VLAN in the Edit Buffer for a particular management domain.

vtpVlanEditIndex

The VLAN-id which this VLAN would have on ISL or 802.1q trunks.

vtpVlanEditState

The state which this VLAN would have.

vtpVlanEditType

The type which this VLAN would have. An implementation may restrict access to this object.

vtpVlanEditName

The name which this VLAN would have. This name would be used as the ELAN-name for an ATM LAN-Emulation segment of this VLAN. An implementation may restrict access to this object.

vtpVlanEditMtu

The MTU size which this VLAN would have, defined as the size of largest MAC-layer (information field portion of the) data frame which can be transmitted on the VLAN. An implementation may restrict access to this object.

vtpVlanEditDot10Said

The value of the 802.10 SAID field which would be used for this VLAN. An implementation may restrict access to this object.

vtpVlanEditRingNumber

The ring number which would be used for this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of 'fddi' or 'tokenRing' and Source Routing is in use on this VLAN.

vtpVlanEditBridgeNumber

The bridge number of the VTP-capable switches which would be used for this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of fddiNet(4) or trNet(5).

vtpVlanEditStpType

The type of the Spanning Tree Protocol which would be running on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of fddiNet(4) or trNet(5). If 'ieee' is selected, the STP that runs w ...

vtpVlanEditParentVlan

The VLAN index of the VLAN which would be the parent for this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of 'fddi' or 'tokenRing' and Source Routing is in use on this VLAN. The pare ...

vtpVlanEditRowStatus

The status of this row. Any and all columnar objects in an existing row can be modified irrespective of the status of the row. A row is not qualified for activation until instances of at least its vtpVlanEditType, vtpVlanEditName and vtpVlanEditDot10Said ...

vtpVlanEditTranslationalVlan1

A VLAN to which this VLAN would be translational-bridged. If this value and the corresponding instance of vtpVlanTranslationalVlan2 are both zero, then this VLAN would not be translational-bridged. An implementation may restrict access to this object.

vtpVlanEditTranslationalVlan2

Another VLAN, i.e., other than that indicated by vtpVlanEditTranslationalVlan1, to which this VLAN would be translational-bridged. If this value and the corresponding instance of vtpVlanTranslationalVlan1 are both zero, then this VLAN would not be transl ...

vtpVlanEditBridgeType

The type of Source Route bridging mode which would be in use on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on this VLAN.

vtpVlanEditAreHopCount

The maximum number of bridge hops allowed in All Routes Explorer frames on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on this ...

vtpVlanEditSteHopCount

The maximum number of bridge hops allowed in Spanning Tree Explorer frames on this VLAN. This object is only instantiated when the value of the corresponding instance of vtpVlanType has a value of fddi(2) or tokenRing(3) and Source Routing is in use on t ...

vtpVlanEditIsCRFBackup

True if this VLAN is of type trCrf and also is acting as a backup trCrf for the ISL distributed BRF. This object is only instantiated when the value of the corresponding instance of vtpVlanEditType has a value of tokenRing(3).

vtpVlanEditTypeExt

The additional type information of this VLAN.

vtpVlanEditTypeExt2

The additional type information of this VLAN. The VlanTypeExt TC specifies which bits may be written by a management application. The agent should provide a default value.

vtpStatsTable

A table of VTP statistics.

vtpStatsEntry

VTP statistics for one management domain.

vtpInSummaryAdverts

The total number of VTP Summary Adverts received for this management domain.

vtpInSubsetAdverts

The total number of VTP Subset Adverts received for this management domain.

vtpInAdvertRequests

The total number of VTP Advert Requests received for this management domain.

vtpOutSummaryAdverts

The total number of VTP Summary Adverts sent for this management domain.

vtpOutSubsetAdverts

The total number of VTP Subset Adverts sent for this management domain.

vtpOutAdvertRequests

The total number of VTP Advert Requests sent for this management domain.

vtpConfigRevNumberErrors

The number of occurrences of configuration revision number errors for this management domain. A configuration revision number error occurs when a device receives a VTP advertisement for which: - the advertisement's Configuration Revision Number is the sa ...

vtpConfigDigestErrors

The number of occurrences of configuration digest errors for this management domain. A configuration digest error occurs when a device receives a VTP advertisement for which: - the advertisement's Configuration Revision Number is greater than the current ...

vlanTrunkPortTable

The table containing information on the local system's VLAN trunk ports.

vlanTrunkPortEntry

Information about one trunk port.

vlanTrunkPortIfIndex

The value of ifIndex for the interface corresponding to this trunk port.

vlanTrunkPortManagementDomain

The value of managementDomainIndex for the management domain on this trunk port. Devices which support only one management domain will support this object read-only.

vlanTrunkPortEncapsulationType

The type of VLAN encapsulation desired to be used on this trunk port. It is either a particular type, or 'negotiate' meaning whatever type results from the negotiation. negotiate(5) is not allowed if the port does not support negotiation or if its vlanTru ...

vlanTrunkPortVlansEnabled

A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet co ...

vlanTrunkPortNativeVlan

The VlanIndex of the VLAN which is represented by native frames on this trunk port. For trunk ports not supporting the sending and receiving of native frames, this value should be set to zero.

vlanTrunkPortRowStatus

The status of this row. In some circumstances, the creation of a row in this table is needed to enable the appropriate trunking/tagging protocol on the port, to enable the use of VTP on the port, and to assign the port to the appropriate management domai ...

vlanTrunkPortInJoins

The number of VTP Join messages received on this trunk port.

vlanTrunkPortOutJoins

The number of VTP Join messages sent on this trunk port.

vlanTrunkPortOldAdverts

The number of VTP Advertisement messages which indicated the sender does not support VLAN-pruning received on this trunk port.

vlanTrunkPortVlansPruningEligible

A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet co ...

vlanTrunkPortVlansXmitJoined

A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet co ...

vlanTrunkPortVlansRcvJoined

A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet co ...

vlanTrunkPortDynamicState

For devices that allows dynamic determination of whether a link between two switches should be a trunk or not, this object allows the operator to mandate the behavior of that dynamic mechanism. on(1) dictates that the interface will always be a trunk. Thi ...

vlanTrunkPortDynamicStatus

Indicates whether the specified interface is either acting as a trunk or not. This is a result of the vlanTrunkPortDynamicState and the ifOperStatus of the trunk port itself.

vlanTrunkPortVtpEnabled

Some trunk interface modules allow VTP to be enabled/disabled seperately from that of the central device. In such a case this object provides management a way to remotely enable VTP on that module. If a module does not support a seperate VTP enabled sta ...

vlanTrunkPortEncapsulationOperType

The type of VLAN encapsulation in use on this trunk port. For intefaces with vlanTrunkPortDynamicStatus of notTrunking(2) the vlanTrunkPortEncapsulationOperType shall be notApplicable(6).

vlanTrunkPortVlansEnabled2k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 10 ...

vlanTrunkPortVlansEnabled3k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 20 ...

vlanTrunkPortVlansEnabled4k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 30 ...

vtpVlansPruningEligible2k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 10 ...

vtpVlansPruningEligible3k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 20 ...

vtpVlansPruningEligible4k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 30 ...

vlanTrunkPortVlansXmitJoined2k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 10 ...

vlanTrunkPortVlansXmitJoined3k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 20 ...

vlanTrunkPortVlansXmitJoined4k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 30 ...

vlanTrunkPortVlansRcvJoined2k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 10 ...

vlanTrunkPortVlansRcvJoined3k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 20 ...

vlanTrunkPortVlansRcvJoined4k

A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 30 ...

vlanTrunkPortDot1qTunnel

Indicates dot1qtunnel mode of the port. If the portDot1qTunnel is set to 'trunk' mode, the port's vlanTrunkPortDynamicState will be changed to 'onNoNegotiate' and the vlanTrunkPortEncapsulationType will be set to 'dot1Q'. These values cannot be changed u ...

vlanTrunkPortVlansActiveFirst2k

A string of octets containing one bit per VLAN with VlanIndex values of 0 through 2047. If the bit corresponding to a VLAN is set to 1, it indicates that vlan is allowed and active in management domain. If the bit corresponding to a VLAN is set to 0, it i ...

vlanTrunkPortVlansActiveSecond2k

A string of octets containing one bit per VLAN with VlanIndex values of 2048 through 4095. If the bit corresponding to a VLAN is set to 1, it indicates that vlan is allowed and active in management domain. If the bit corresponding to a VLAN is set to 0, i ...

vlanTrunkPortSetSerialNo

An advisory lock used to allow several cooperating SNMPv2 managers to coordinate their use of the SNMPv2 set operation acting upon any instance of vlanTrunkPortVlansEnabled.

vlanTrunkPortsDot1qTag

An indication of whether the tagging on all VLANs including native VLAN for all 802.1q trunks is enabled. If this object has a value of true(1) then all VLANs including native VLAN are tagged. If the value is false(2) then all VLANs excluding native VLAN ...

vtpDiscoverTable

This table contains information related to the discovery of the VTP members in the designated management domain. This table is not instantiated when managementDomainVersionInUse is version1(1), version2(3) or none(3).

vtpDiscoverEntry

Information related to the discovery of the VTP members in one management domain.

vtpDiscoverAction

When this object is set to discover(1), all the entries in vtpDiscoverResultTable for the corresponding management domain will be removed and the local device will begin to discover all VTP members in the management domain. Upon the successful completion ...

vtpDiscoverStatus

The current status of VTP discovery. inProgress - a discovery is in progress; succeeded - the discovery was completed successfully (this value is also used when no discover has been invoked since the last time the local system restarted); resourceUnavaila ...

vtpLastDiscoverTime

The value of sysUpTime at which the last discovery was completed. A value of zero indicates that no discovery has been invoked since last time the local system restarted.

vtpDiscoverResultTable

The table containing information of discovered VTP members in the management domain in which the local system is participating. This table is not instantiated when managementDomainVersionInUse is version1(1), version2(2) or none(3).

vtpDiscoverResultEntry

A conceptual row is created for each VTP member which is found through successful discovery.

vtpDiscoverResultIndex

A value assigned by the system which identifies a VTP member and the associated database in the management domain.

vtpDiscoverResultDatabaseName

The database name associated with the discovered VTP member.

vtpDiscoverResultConflicting

Indicates whether this VTP member contains conflicting information. true(1) indicates that this member has conflicting information of the database type in the management domain. false(2) indicates that there is no conflicting information of the database t ...

vtpDiscoverResultDeviceId

The unique identifier of the device for this VTP member.

vtpDiscoverResultPrimaryServer

The unique identifier of the primary server for this VTP member and the associated database type. There are two different VTP servers, the primary server and the secondary server. When a local device is configured as a server for a certain database type, ...

vtpDiscoverResultRevNumber

The current configuration revision number as known by the VTP member. When the database type is unknown for the VTP member, this value is 0.

vtpDiscoverResultSystemName

sysName of the VTP member.

vtpDatabaseTable

This table contains information of the VTP databases. It is not instantiated when managementDomainVersionInUse is version1(1), version2(3) or none(3).

vtpDatabaseEntry

Information about the status of the VTP database in the domain. Each VTP database type known to the local device type has an entry in this table. An entry is also created for unknown database which is notified through VTP advertisements from other VTP se ...

vtpDatabaseIndex

A value assigned by the system which uniquely identifies a VTP database in the local system.

vtpDatabaseName

The name of the database.

vtpDatabaseLocalMode

The local VTP mode for a particular database type in this administrative domain. - 'client' indicates that the local system is acting as a VTP client of the database type. - 'server' indicates that the local system is acting as a VTP server of the databas ...

vtpDatabaseRevNumber

The current configuration revision number as known by the local device for this VTP 3 database type in the management domain. This value is updated (if necessary) whenever a VTP advertisement for the database type is received or generated. When the datab ...

vtpDatabasePrimaryServer

There are two kinds of VTP version 3 servers for a certain database type - the primary server and the secondary server. When a local device is configured as a server for a certain database type, it becomes secondary server by default. Primary server is an ...

vtpDatabasePrimaryServerId

The unique identifier of the primary server in the management domain for the database type. If no primary server is discovered for the database type, the object has a value of zero length string.

vtpDatabaseTakeOverPrimary

There are two kinds of VTP version 3 servers for a certain database type - the primary server and the secondary server. When a local device is configured as a server for a certain database type, it becomes secondary server by default. Primary server is an ...

vtpDatabaseTakeOverPassword

When read, this object always returns the value of a zero-length octet string. In the case that the VTP password is hidden from the configuration and the local device intends to take over the whole domain, this object must be set to the matching password ...

vtpAuthenticationTable

The table contains the authentication information of VTP in which the local system participates. The security mechanism of VTP relies on a secret key that is used to alter the MD5 digest of the packets transmitted on the wire. The secret value is created ...

vtpAuthEntry

Information about the status of the VTP authentication information in one domain.

vtpAuthPassword

By default, this object has a value of a zero-length character string and is considered to be not configured. The device uses the password to generate the secret key. It can be stored in the configuration in plain text or hidden from the configuration. If ...

vtpAuthPasswordType

By default this object has the value as plaintext(1) and the VTP password is stored in the configuration file in plain text. Setting this object to hidden(2) will hide the password from the configuration. Once this object is set to hidden(2), it cannot be ...

vtpAuthSecretKey

The device creating or modifying the VTP configuration signs it using the MD5 digest generated from the secret key before advertising it. Other devices in the domain receiving this configuration use the same secret key to accept it if it was correctly sig ...

vlanStatsVlans

This object indicates the number of the existing manageable VLANs with VLAN indices from 1 to 1024 in the system.

vlanStatsExtendedVlans

This object indicates the number of the existing manageable VLANs with VLAN indices greater than 1024 in the system.

vlanStatsInternalVlans

This object indicates the number of the internal VLANs existing in the system.

vlanStatsFreeVlans

This object indicates the number of the free or unused VLANs in the system.

vtpVlanPortLocalSegment

The ring (segment) number in use on a 802.5 ring. For bridges supporting RFC 1525, this value is the same as given by dot1dSrPortLocalSegment for the bridge port attached to that ring. When tokenRing VLANs are in use, each 'trNet' VLAN can/does have a d ...

vtpBasicGroup

A collection of objects providing basic status and control of a VTP implementation.

vtpVlanInfoGroup

A collection of objects for monitoring VLAN information.

vtpVlanInfoEditGroup

A collection of objects for editing VLAN information in VTP Servers.

vtpStatsGroup

A collection of objects providing VTP statistics.

vtpTrunkPortGroup

A collection of objects providing information on trunk ports.

vtpTrunkPortGroup2

Additional functionality added to the vlanTrunkPortTable.

vtpTrunkPortGroup3

Additional functionality added to the vlanTrunkPortTable.

vtpTrunkPruningGroup

A collection of objects providing information on VLAN pruning.

vtpTrunkPruningGroup2

A collection of object providing information on whether VLAN pruning is enabled.

vtpVersion2BasicGroup

The object required to indicate the version of VTP in use by a management domain.

vtp4kVlanGroup

A collection of objects providing information for VLANS with VlanIndex from 1024 to 4095.

vtpDot1qTunnelGroup

A collection of objects providing information for dot1qtunnel feature.

vtpVlanIfIndexGroup

A collection of objects providing information for mapping of VLAN ID to its corresponding ifIndex.

vtpVlanInfoEditGroup2

A collection of objects for editing VLAN information when only one VLAN is allowed to be edited for each 'apply' operation.

vtp4kVlanGroupRev1

A collection of objects providing information for VLANS with VlanIndex from 1024 to 4095.

vtpNotificationObjectsGroup

A collection of objects included in VTP notifications.

vtpDot1qTunnelGroup2

A collection of objects providing information for dot1qtunnel feature.

vtpVlanNotifEnabledGroup

A collection of objects to indicate whether a certain group of notifications are enabled.

vtpDiscoverGroup

A collection of objects providing information of VTP discovery.

vtpDatabaseGroup

A collection of objects providing information of VTP databases.

vtpAuthGroup

A collection of objects providing information of VTP authentication mechanism.

vtpInternalVlanGrp

A collection of objects providing information of internal VLANs.

vlanStatsGroup

A collection of objects providing VLAN statistics information in the system.

vtpTrunkPruningGroup3

A collection of objects providing information on operational VTP pruning state in a manamgement domain.

vlanTrunkPortActiveVlansGroup

A collection of objects providing active vlan information for a trunking port in a management domain.