CISCO-WAN-3G-MIB Download

c3gWanCommonTable

Cellular 3G common objects table.

c3gWanCommonEntry

An entry (conceptual row) in the c3gWanCommonTable.

c3gStandard

Cellular 3G Standard: GSM (Global System for Mobile communications, 3GPP) and CDMA (Code Division Multiple Access, 3GPP-2).

c3gCapability

Cellular 3G service capability.

c3gModemState

Cellular 3G modem state, up(2) indicates modem can be detected and down(3) indicates modem can not be detected.

c3gPreviousServiceType

This object indicates the previous service type when service type changes.

c3gCurrentServiceType

This object indicates the current service type when service type changes.

c3gRoamingStatus

Cellular 3G current roaming status.

c3gCurrentSystemTime

Cellular 3G current system time received from base station.

c3gConnectionStatus

Indicates the current connection status.

c3gNotifRadioService

This object is used as one of the var-bind object when notification for RSSI or Ec/Io is generated. This object indicates which service generates the notification.

c3gNotifRssi

This object is used as one of the var-bind object when notification for RSSI is generated. The relevant RSSI will be copied into c3gNotifRssi which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value o ...

c3gNotifEcIo

This object is used as one of the var-bind object when notification for Ec/Io is generated. The relevant Ec/Io will be copied into c3gNotifEcIo which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value ...

c3gModemTemperature

The modem temperature.

c3gRssiOnsetNotifThreshold

The RSSI onset threshold value. If RSSI goes below the threshold and the service bit in c3gRssiOnsetNotifFlag is set, the c3gRssiOnsetNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than ...

c3gRssiAbateNotifThreshold

The RSSI abate threshold value. If RSSI goes above the threshold and the service bit in c3gRssiAbateNotifFlag is set, the c3gRssiAbateNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than ...

c3gEcIoOnsetNotifThreshold

The EcIo onset threshold value. If EcIo goes below the threshold and the service bit in c3gEcIoOnsetNotifFlag is set, the c3gEcIoOnsetNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than ...

c3gEcIoAbateNotifThreshold

The threshold value that if EcIo goes above the threshold and the service bit in c3gEcIoAbateNotifFlag is set, the c3gEcIoAbateNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal ...

c3gModemTemperOnsetNotifThreshold

The modem temperature onset threshold value. If modem temperature goes above the threshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', the c3gModemTemperOnsetNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold ...

c3gModemTemperAbateNotifThreshold

The modem temperature abate threshold value. If modem temperature goes below the threshold and the value of c3gModemTemperAbateNotifEnabled is 'true', the c3gModemTemperAbateNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold ...

c3gModemReset

This object is used to reset or power-cycle the modem.

c3gModemUpNotifEnabled

This object is used to enable/disable the generation of modem up notification c3gModemUpNotif.

c3gModemDownNotifEnabled

This object is used to enable/disable the generation of modem down notification c3gModemDownNotif.

c3gServiceChangedNotifEnabled

This object is used to enable/disable the generation of service changed notification c3gServiceChangedNotif.

c3gNetworkChangedNotifEnabled

This object is used to enable/disable the generation of network changed notification c3gNetworkChangedNotif.

c3gConnectionStatusChangedNotifFlag

This object is the flag bitmap to control the generation of notification c3gConnectionStatusChangedNotif. e.g. setting bit 0 (error(0)) to 1 and bit 4 (disconnected(4)) to 1 will cause the notification c3gConnectionStatusChangedNotif to be generated when ...

c3gRssiOnsetNotifFlag

This object is the flag bitmap to control the generation of notification c3gRssiOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiOnsetN ...

c3gRssiAbateNotifFlag

This object is the flag bitmap to control the generation of notification c3gRssiAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiAbateN ...

c3gEcIoOnsetNotifFlag

This object is the flag bitmap to control the generation of notification c3gEcIoOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoOnsetN ...

c3gEcIoAbateNotifFlag

This object is the flag bitmap to control the generation of notification c3gEcIoAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoAbateN ...

c3gModemTemperOnsetNotifEnabled

This object is used to enable/disable the generation of c3gModemTemperOnsetNotif notification.

c3gModemTemperAbateNotifEnabled

This object is used to enable/disable the generation of c3gModemTemperAbateNotif notification.

c3gCdmaSessionTable

This table describes wireless session(link) created when a modem connects to a particular cellular network. One or more logical calls can be placed over wireless session(link). These logical calls are represented in the c3gCdmaConnectionTable.

c3gCdmaSessionEntry

An entry (conceptual row) in the c3gCdmaSessionTable.

c3gCdmaTotalCallDuration

Total duration of all calls.

c3gCdmaTotalTransmitted

Total data transmitted for all calls. It is the total amount of data transmitted by modem, not to be confused with the number of bytes transmitted through the interface.

c3gCdmaTotalReceived

Total data received for all calls. It is the total amount of data received by modem, not to be confused with the number of bytes received from the interface.

c3gHdrDdtmPreference

HDR Data Dedicated Transmission Mode (DDTM) preference: unknown(1) - DDTM preference is unknown off(2) - DDTM preference set to OFF on(3) - DDTM preference set to ON noChange(4) - DDTM preference is no change

c3gCdmaConnectionTable

Cellular 3G CDMA connection table. This table describes logical connections/calls over wireless link, the wireless link is described in c3gCdmaSessionTable.

c3gCdmaConnectionEntry

An entry (conceptual row) in the c3gCdmaConnectionTable.

c3gOutgoingCallNumber

Phone number of outgoing call.

c3gHdrAtState

High Data Rate (HDR) Access Terminal (AT) state.

c3gHdrSessionState

High Data Rate (HDR) session state.

c3gUati

Unicast Access Terminal Identifier (UATI), AT seeking access to the 1 times EV-DO system receives a UATI allocated from the system after setting up a radio traffic channel with a base station.

c3gColorCode

Color code. A sync channel may be used by the base station to communicate administrative information to a mobile station. For example, a base station may transmit a base station ID to a user, a color code and administrative information identifying system ...

c3gRati

Random Access Terminal Identifier (RATI). AT transmits a UATI request message to the ANC using the RATI to make a UATI allocation request.

c3gHdrSessionDuration

HDR connection session duration. It is the duration between c3gHdrSessionStart and c3gHdrSessionEnd.

c3gHdrSessionStart

HDR connection session starting time.

c3gHdrSessionEnd

HDR connection session ending time.

c3gAuthStatus

Connection authentication status: unknown(1) - authentication status is unknown notAuthenticated(2) - not yet authenticated. authenticated(3) - authenticated. failed(4) - authentication failed. authenticationD ...

c3gHdrDrc

High Data Rate (HDR) Data Rate Control (DRC). AT provides requests for data transmissions by sending a Data Rate Control, DRC, message via a specific channel referred to as the DRC channel.

c3gHdrDrcCover

HDR DRC cover. The DRC cover is a coding applied to identify the sector from which the data is to be transmitted. In one embodiment, the DRC cover is a Walsh code applied to the DRC value, wherein a unique code corresponds to each sector in the Active Se ...

c3gHdrRri

HDR Rate Request Indicator (RRI). RRI provides the structure of a frame currently being transmitted when frames are transmitted at different rates. Services at different rates are reliably provided by the RRI: unknown(1) - RRI unknown pilotOnly(2) ...

c3gMobileIpErrorCode

Mobile IP error code (please refer to RFC 2002).

c3gCdmaCurrentTransmitted

Current number of bytes transmitted by modem for current connection.

c3gCdmaCurrentReceived

Current number of bytes received by modem for current connection.

c3gCdmaCurrentCallStatus

Current call status.

c3gCdmaCurrentCallDuration

Current call duration.

c3gCdmaCurrentCallType

Current call type.

c3gCdmaLastCallDisconnReason

Last call disconnect reason: unknown(1) - Unknown modemOffline(2) - Modem offline modemCdmaLocTilPowCyc(3) - Modem CDMA locked till power cycle noService(4) - No service abnormalCallEnd(5) - Abnormal call end baseS ...

c3gCdmaLastConnError

Last connect error: none(1) - None invalidClientId(2) - Invalid client ID badCallType(3) - Bad call type badServiceType(4) - Bad service type expectingNumber(5) - Expecting number nullNumbe ...

c3gCdmaIdentityTable

Cellular 3G CDMA identity table.

c3gCdmaIdentityEntry

An entry (conceptual row) in the c3gCdmaIdentityTable.

c3gEsn

This object indicates Electronic Serial Number (ESN).

c3gModemActivationStatus

Modem activation status.

c3gAccountActivationDate

Modem account activation date.

c3gCdmaRoamingPreference

This object indicates the roaming preference: unknown(1) - preference unknown home(2) - home networks only affiliated(3) - roaming on affiliated networks any(4) - roaming on any network

c3gPrlVersion

Preferred Roaming List (PRL) version.

c3gMdn

Mobile Directory Number (MDN), a dialable number assigned to a wireless phone.

c3gMsid

Mobile Station Identifier (MSID), MSID is utilized to distinguish the mobile station being programmed from other mobile stations during messaging and paging processes, including the downloading of programming information to the mobile station.

c3gMsl

Mobile Subscriber Lock (MSL).

c3gCdmaNetworkTable

Cellular 3G CDMA network table.

c3gCdmaNetworkEntry

An entry (conceptual row) in the c3gCdmaNetworkTable.

c3gCdmaCurrentServiceStatus

Current service status.

c3gCdmaHybridModePreference

This object indicates the hybrid mode preference: unknown(1) - preference unknown hybrid(2) - connect to EV-DO/1xRTT services evDoOnly(3) - connect to only EV-DO service oneXRttOnly(4) - connect to only 1xRTT service

c3gCdmaCurrentRoamingStatus

Current 1xRTT roaming status, roaming is a general term in wireless telecommunications that refers to the extending of connectivity service in a location that is different from the home location where the service was registered: unknown(1) - roa ...

c3gCurrentIdleDigitalMode

Current idle digital mode: unknown(1) - service is unknown noService(2) - no service amps(3) - Advanced Mobile Phone Service (AMPS) cdma(4) - Code Division Multiple Access (CDMA) gsm(5) - Global System for Mobile communications (GSM) hdr ...

c3gCurrentSid

Current System Identifier (SID), SID is a 15-bit numeric identifiers used by cellular systems to identify the home system of a cellular telephone and by the cellular telephone to determine its roaming status. Value of '-1' indicates SID is 'Not Applicabl ...

c3gCurrentNid

Current Network Identification (NID), NID is a 16-bit numeric identifiers used by cellular systems. Value of '-1' indicates NID is 'Not Applicable'.

c3gCurrentCallSetupMode

Current call setup mode. The 1xEV-DO system supports packet data connections to a public or private data network using either mobile IP or simple IP protocol. For simple IP protocol, moving from the coverage area of one PDSN to another PDSN constitutes ...

c3gSipUsername

Simple IP (SIP) user name.

c3gSipPassword

Simple IP (SIP) password.

c3gServingBaseStationLongitude

Longitude of the serving base station.

c3gServingBaseStationLatitude

Latitude of the serving base station.

c3gCdmaProfileCommonTable

Cellular 3G CDMA profile common table.

c3gCdmaProfileCommonEntry

An entry (conceptual row) in the c3gCdmaProfileCommonTable.

c3gNumberOfDataProfileConfigurable

The number of data profiles configurable.

c3gCurrentActiveDataProfile

The current active data profile.

c3gCdmaProfileTable

Cellular 3G CDMA profile table.

c3gCdmaProfileEntry

An entry (conceptual row) in the c3gCdmaProfileTable.

c3gCdmaProfileIndex

Profile index, combined with entPhysicalIndex to access the profile table c3gCdmaProfileTable.

c3gNai

Network Access Identifier (NAI). NAI is required to identify the mobile user and the network the mobile user intended to access. The NAI is provided by the mobile node to the dialed ISP during PPP authentication.

c3gAaaPassword

This object indicates the password for AAA.

c3gMnHaSs

Mobile Node (MN) Home Agent (HA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set

c3gMnHaSpi

Mobile Node (MN) Home Agent (HA) Security Parameter Index (SPI).

c3gMnAaaSs

Mobile Node (MN) Authentication Authorization Accounting (AAA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set

c3gMnAaaSpi

Mobile Node (MN) Authentication Authorization Accounting (AAA) Security Parameter Index (SPI).

c3gReverseTunnelPreference

Reverse tunnel preference.

c3gHomeAddrType

A value that represents the type of the IP Address stored in the object c3gHomeAddr.

c3gHomeAddr

A unicast routable address assigned to a Mobile Node, used as the permanent address of the Mobile Node.

c3gPriHaAddrType

A value that represents the type of the IP Address stored in the object c3gPriHaAddr.

c3gPriHaAddr

The primary home agent address.

c3gSecHaAddrType

A value that represents the type of the IP Address stored in the object c3gSecHaAddr.

c3gSecHaAddr

The secondary home agent address.

c3gCdma1xRttRadioTable

Cellular 3G CDMA 1xRTT radio table.

c3gCdma1xRttRadioEntry

An entry (conceptual row) in the c3gCdma1xRttRadioTable.

c3gCurrent1xRttRssi

Current 1xRTT RSSI value.

c3gCurrent1xRttEcIo

Current 1xRTT Ec/Io value.

c3gCurrent1xRttChannelNumber

Current 1xRTT channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.

c3gCurrent1xRttChannelState

Current 1xRTT channel state. Indicates whether the modem is scanning or has acquired the channel.

c3gCdma1xRttBandClassTable

Cellular 3G CDMA 1xRTT band class table. This table contains band class information for each available band.

c3gCdma1xRttBandClassEntry

An entry (conceptual row) in the c3gCdma1xRttBandClassTable.

c3gBandClassIndex

Band class index, combined with entPhysicalIndex to access the band class table.

c3g1xRttBandClass

This object contains 1xRTT band class.

c3gCdmaEvDoRadioTable

Cellular 3G CDMA EV-DO radio table.

c3gCdmaEvDoRadioEntry

An entry (conceptual row) in the c3gCdmaEvDoRadioTable.

c3gCurrentEvDoRssi

Current EV-DO RSSI value.

c3gCurrentEvDoEcIo

Current EV-DO Ec/Io value.

c3gCurrentEvDoChannelNumber

Current EV-DO channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.

c3gSectorId

Sector ID of the base station to which the modem is attached.

c3gSubnetMask

Subnet mask of the sector, not to be confused with the IP subnet mask.

c3gHdrColorCode

Color code of the sector.

c3gPnOffset

PN offset. PN offset is a time offset from the beginning of the well-known pseudo-random noise sequence that is used to spread the signal from the base station.

c3gRxMainGainControl

Received main gain control for the modem. value of '-1' indicates the received main gain control is unavailable.

c3gRxDiversityGainControl

Received diversity for the modem. value of '-1' indicates the received diversity is unavailable.

c3gTxTotalPower

Transmit total power.

c3gTxGainAdjust

Transmit gain adjust.

c3gCarrierToInterferenceRatio

Carrier to interference ratio. Carrier-to-Interference ratio (C/I) is the ratio of power in an RF carrier to the interference power in the channel.

c3gCdmaEvDoBandClassTable

Cellular 3G CDMA EV-DO band class table. This table contains band class information for each available band.

c3gCdmaEvDoBandClassEntry

An entry (conceptual row) in the c3gCdmaEvDoBandClassTable.

c3gEvDoBandClass

This object contains EV-DO band class.

c3gCdmaHistoryTable

Cellular 3G CDMA history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string w ...

c3gCdmaHistoryEntry

An entry (conceptual row) in the c3gCdmaHistoryTable.

c3gCdmaHistory1xRttRssiPerSecond

Per-second 1xRTT RSSI history. This object contains a per-second history of 1xRTT RSSI values for the last 60 seconds.

c3gCdmaHistory1xRttRssiPerMinute

Per-minute 1xRTT weakest RSSI value history. This object contains a per-minute history of 1xRTT weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.

c3gCdmaHistory1xRttRssiPerHour

Per-hour 1xRTT weakest RSSI value history. This object contains a per-hour history of 1xRTT weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.

c3gCdmaHistoryEvDoRssiPerSecond

Per-second EV-DO RSSI history. This object contains a per-second history of EV-DO RSSI values for the last 60 seconds.

c3gCdmaHistoryEvDoRssiPerMinute

Per-minute EV-DO weakest RSSI value history. This object contains a per-minute history of EV-DO weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.

c3gCdmaHistoryEvDoRssiPerHour

Per-hour EV-DO weakest RSSI value history. This object contains a per-hour history of EV-DO weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.

c3gCdmaSecurityTable

Cellular 3G CDMA security table.

c3gCdmaSecurityEntry

An entry (conceptual row) in the c3gCdmaSecurityTable.

c3gCdmaPinSecurityStatus

CDMA Personal Identification Number (PIN) security: unknown(1) - PIN security unknown locked(2) - PIN security is locked unlocked(3) - PIN security is unlocked

c3gCdmaPowerUpLockStatus

CDMA power up lock: unknown(1) - power up lock unknown enabled(2) - power up lock enabled disabled(3) - power up lock disabled

c3gGsmIdentityTable

Cellular 3G GSM identity table.

c3gGsmIdentityEntry

An entry (conceptual row) in the c3gGsmIdentityTable.

c3gImsi

International Mobile Subscriber Identifier (IMSI), a unique 15-digit code used to identify an individual user on a GSM network.

c3gImei

International Mobile Equipment Identifier (IMEI), a unique 15 or 17 digit code used to identify an individual mobile station to a GSM or UMTS network.

c3gIccId

This object indicates the Integrated Circuit Card ID (ICCID). The ICCID is defined by the ITU-T recommendation E.118. ICCIDs are stored in the SIM cards and are also engraved or printed on the SIM card body during a process called personalization.

c3gMsisdn

This object indicates the Mobile Subscriber Integrated Services Digital Network Number (MSISDN). It is a number uniquely identifying a subscription in a GSM or UMTS mobile network. It represents the telephone number to the SIM card in a mobile/cellular ph ...

c3gFsn

Forward Sequence Number (FSN), a message acknowledgement method using sequence number in the forward direction.

c3gModemStatus

Modem status: unknown(1) - modem status is unknown offLine(2) - modem is off line onLine(3) - modem is on line lowPowerMode(4) - modem is in the low power mode

c3gGsmRoamingPreference

This object indicates the roaming preference.

c3gGsmNetworkTable

Cellular 3G GSM Network table.

c3gGsmNetworkEntry

An entry (conceptual row) in the c3gGsmNetworkTable.

c3gGsmLac

Location Area Code (LAC). LAC is given by the base station.

c3gGsmCurrentServiceStatus

Current Service Status: unknown(1) - current service status is unknown noService(2) - no service normal(3) - service status is normal emergencyOnly(4) - emergency service only

c3gGsmCurrentServiceError

Current service error: unknown(1) - Unknown none(2) - None imsiUnknownInHlr(3) - IMSI unknown in HLR (Home Location Register) illegalMs(4) - Illegal MS (Mobile Station) imsiUnknownInVlr(5) - I ...

c3gGsmCurrentService

Current service type: unknown(1) - service type is unknown invalid(2) - no service circuitSwitched(3) - circuit switched service packetSwitched(4) - packet switched service combined(5) - combination of circuit and packet switched s ...

c3gGsmPacketService

Packet Service type: unknown(1) - service type is unknown. none(2) - no service. gprs(3) - General Packet Radio Service (GPRS). edge(4) - Enhanced Data rates for GSM Evolution (EDGE). umtsWcdma(5) - Universal Mobile Telecommunications Sys ...

c3gGsmCurrentRoamingStatus

This object indicates whether the modem is in the home network or is roaming.

c3gGsmNetworkSelectionMode

Network selection mode. Can be manual selection mode or automatic selection mode. Set to automatic by default.

c3gGsmCountry

Country code. Country code string is given by the base station.

c3gGsmNetwork

Network code. Network Code string is given by the base station.

c3gGsmMcc

Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not Applicable'.

c3gGsmMnc

Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not Applicable'.

c3gGsmRac

Routing Area Code (RAC). RAC is given by the base station.

c3gGsmCurrentCellId

Cell Identifier of current cell. Cell ID is given by the base station.

c3gGsmCurrentPrimaryScramblingCode

Primary scrambling code of current cell. The primary scrambling code is typically identified through symbol-by-symbol correlation over the CPICH (Common Pilot Channel) with all codes within the code group, after the primary scrambling code has been ident ...

c3gGsmPlmnSelection

Public Land Mobile Network (PLMN) selection. Can be manual selection mode or automatic selection mode. Set to automatic by default.

c3gGsmRegPlmn

Registered PLMN.

c3gGsmPlmnAbbr

PLMN abbreviated number.

c3gGsmServiceProvider

Service provider.

c3gGsmTotalByteTransmitted

Total number of bytes transmitted for all calls. It is the total number of bytes transmitted by modem, not to be confused with the number of bytes transmitted through the interface.

c3gGsmTotalByteReceived

Total number of bytes received for all calls. It is the total number of bytes received by modem, not to be confused with the number of bytes received from the interface.

c3gGsmPdpProfileTable

Cellular 3G GSM PDP profiles table. Cellular device contains multiple profile entries which can be used to establish cellular data connections (PDP contexts). Users can choose any of available PDP profiles to establish data connections. Data connection ...

c3gGsmPdpProfileEntry

An entry (conceptual row) in the c3gGsmPdpProfileTable.

c3gGsmPdpProfileIndex

Profile index, combined with entPhysicalIndex to access profile table.

c3gGsmPdpProfileType

This object indicates configured Packet Data Protocol (PDP) type.

c3gGsmPdpProfileAddr

Configured PDP address. PDP type is defined in c3gGsmPdpProfileType.

c3gGsmPdpProfileApn

This object indicates profile Access Point Name (APN). This information is provided by the service provider.

c3gGsmPdpProfileAuthenType

This object indicates PPP authentication type supported. CHAP and PAP are supported. The type of authentication to be used is provided by the service provider.

c3gGsmPdpProfileUsername

This object indicates the username to be used for PPP authentication. This information is provided by the service provider.

c3gGsmPdpProfilePassword

This object indicates the password to be used for PPP authentication. This information is provided by the service provider.

c3gGsmPdpProfileRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gGsmPacketSessionTable

Cellular 3G GSM packet session table.

c3gGsmPacketSessionEntry

An entry (conceptual row) in the c3gGsmPacketSessionTable.

c3gGsmPacketSessionStatus

This object indicates Packet Data Protocol (PDP) session status of the profile. Active when the call is established and PDP context has become active.

c3gGsmPdpType

This object indicates current session Packet Data Protocol (PDP) type.

c3gGsmPdpAddress

Current session PDP address. PDP type is obtained from c3gGsmPdpType.

c3gGsmReqUmtsQosTable

Requested UMTS QoS parameters table. This table contains UMTS QoS parameters requested by modem to the cellular network via PDP Context Activation Request message. The requested UMTS QoS profile is optional.

c3gGsmReqUmtsQosEntry

An entry (conceptual row) in the c3gGsmReqUmtsQosTable.

c3gGsmReqUmtsQosTrafficClass

Request UMTS QoS traffic classes.

c3gGsmReqUmtsQosMaxUpLinkBitRate

Request UMTS QoS maximum uplink bit rate.

c3gGsmReqUmtsQosMaxDownLinkBitRate

Request UMTS QoS maximum downlink bit rate.

c3gGsmReqUmtsQosGuaUpLinkBitRate

Request UMTS QoS guaranteed uplink bit rate.

c3gGsmReqUmtsQosGuaDownLinkBitRate

Request UMTS QoS guaranteed downlink bit rate.

c3gGsmReqUmtsQosOrder

Request UMTS QoS deliver order.

c3gGsmReqUmtsQosErroneousSdu

Request UMTS QoS Delivery of Erroneous SDU.

c3gGsmReqUmtsQosMaxSduSize

Request UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.

c3gGsmReqUmtsQosSer

Request UMTS QoS SDU error ratio.

c3gGsmReqUmtsQosBer

Request UMTS QoS residual bit error ratio.

c3gGsmReqUmtsQosDelay

Request UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.

c3gGsmReqUmtsQosPriority

Request UMTS QoS traffic handling priority.

c3gGsmReqUmtsQosSrcStatDescriptor

Request UMTS QoS source statistics descriptor.

c3gGsmReqUmtsQosSignalIndication

Request UMTS QoS signalling indication.

c3gGsmReqUmtsQosRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gGsmMinUmtsQosTable

Minimum acceptable UMTS QoS table. This table contains minimum acceptable UMTS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable UMTS ...

c3gGsmMinUmtsQosEntry

An entry (conceptual row) in the c3gGsmMinUmtsQosTable.

c3gGsmMinUmtsQosTrafficClass

Minimum UMTS QoS traffic classes.

c3gGsmMinUmtsQosMaxUpLinkBitRate

Minimum UMTS QoS maximum uplink bit rate.

c3gGsmMinUmtsQosMaxDownLinkBitRate

Minimum UMTS QoS maximum downlink bit rate.

c3gGsmMinUmtsQosGuaUpLinkBitRate

Minimum UMTS QoS guaranteed uplink bit rate.

c3gGsmMinUmtsQosGuaDownLinkBitRate

Minimum UMTS QoS guaranteed downlink bit rate.

c3gGsmMinUmtsQosOrder

Minimum UMTS QoS deliver order.

c3gGsmMinUmtsQosErroneousSdu

Minimum UMTS QoS Delivery of Erroneous SDU.

c3gGsmMinUmtsQosMaxSduSize

Minimum UMTS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.

c3gGsmMinUmtsQosSer

Minimum UMTS QoS SDU error ratio.

c3gGsmMinUmtsQosBer

Minimum UMTS residual bit error ratio.

c3gGsmMinUmtsQosDelay

Minimum UMTS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.

c3gGsmMinUmtsQosPriority

Minimum UMTS QoS traffic handling priority.

c3gGsmMinUmtsQosSrcStatDescriptor

Minimum UMTS QoS source statistics descriptor.

c3gGsmMinUmtsQosSignalIndication

Minimum UMTS QoS signalling indication.

c3gGsmMinUmtsQosRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gGsmNegoUmtsQosTable

Negotiated UMTS QoS table. This table contains negotiated UMTS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTa ...

c3gGsmNegoUmtsQosEntry

An entry (conceptual row) in the c3gGsmNegoUmtsQosTable.

c3gGsmNegoUmtsQosTrafficClass

Negotiated UMTS QoS traffic classes.

c3gGsmNegoUmtsQosMaxUpLinkBitRate

Negotiated UMTS QoS maximum uplink bit rate.

c3gGsmNegoUmtsQosMaxDownLinkBitRate

Negotiated UMTS QoS maximum downlink bit rate.

c3gGsmNegoUmtsQosGuaUpLinkBitRate

Negotiated UMTS QoS guaranteed uplink bit rate.

c3gGsmNegoUmtsQosGuaDownLinkBitRate

Negotiated UMTS QoS guaranteed downlink bit rate.

c3gGsmNegoUmtsQosOrder

Negotiated UMTS QoS deliver order.

c3gGsmNegoUmtsQosErroneousSdu

Negotiated UMTS QoS Delivery of Erroneous SDU.

c3gGsmNegoUmtsQosMaxSduSize

Negotiated UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is subscribed.

c3gGsmNegoUmtsQosSer

Negotiated UMTS QoS SDU error ratio.

c3gGsmNegoUmtsQosBer

Negotiated UMTS QoS residual bit error ratio.

c3gGsmNegoUmtsQosDelay

Negotiated UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is subscribed.

c3gGsmNegoUmtsQosPriority

Negotiated UMTS QoS traffic handling priority.

c3gGsmNegoUmtsQosSrcStatDescriptor

Negotiated UMTS QoS source statistics descriptor.

c3gGsmNegoUmtsQosSignalIndication

Negotiated UMTS QoS signalling indication.

c3gGsmReqGprsQosTable

Requested GPRS QoS parameters table. This table contains GPRS QoS parameters requested by modem to the cellular network via PDP Context Request message. The requested GPRS QoS profile is optional.

c3gGsmReqGprsQosEntry

An entry (conceptual row) in the c3gGsmReqGprsQosTable.

c3gGsmReqGprsQosPrecedence

Request GPRS QoS precedence.

c3gGsmReqGprsQosDelay

Request GPRS QoS delay classes.

c3gGsmReqGprsQosReliability

Request GPRS QoS reliability.

c3gGsmReqGprsQosPeakRate

Request GPRS QoS peak rate.

c3gGsmReqGprsQosMeanRate

Request GPRS QoS mean rate.

c3gGsmReqGprsQosRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gGsmMinGprsQosTable

Minimum acceptable GPRS QoS table. This table contains minimum acceptable GPRS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable GPRS ...

c3gGsmMinGprsQosEntry

An entry (conceptual row) in the c3gGsmMinGprsQosTable.

c3gGsmMinGprsQosPrecedence

Minimum GPRS QoS precedence.

c3gGsmMinGprsQosDelay

Minimum GPRS QoS delay classes.

c3gGsmMinGprsQosReliability

Minimum GPRS QoS reliability.

c3gGsmMinGprsQosPeakRate

Minimum GPRS QoS peak rate.

c3gGsmMinGprsQosMeanRate

Minimum GPRS QoS mean rate.

c3gGsmMinGprsQosRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gGsmNegoGprsQosTable

Negotiated GPRS QoS table. This table contains negotiated GPRS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTa ...

c3gGsmNegoGprsQosEntry

An entry (conceptual row) in the c3gGsmNegoGprsQosTable.

c3gGsmNegoGprsQosPrecedence

Negotiated GPRS QoS precedence.

c3gGsmNegoGprsQosDelay

Negotiated GPRS QoS delay classes.

c3gGsmNegoGprsQosReliability

Negotiated GPRS QoS reliability.

c3gGsmNegoGprsQosPeakRate

Negotiated GPRS QoS peak rate.

c3gGsmNegoGprsQosMeanRate

Negotiated GPRS QoS mean rate.

c3gGsmRadioTable

Cellular 3G GSM radio table.

c3gGsmRadioEntry

An entry (conceptual row) in the c3gGsmRadioTable.

c3gCurrentGsmRssi

The GPRS/UMTS RSSI value.

c3gCurrentGsmEcIo

The GPRS/UMTS Ec/Io value.

c3gGsmCurrentBand

GPRS/UMTS band to which the modem is attached.

c3gGsmChannelNumber

Channel number to which the modem is attached.

c3gGsmNumberOfNearbyCell

This object indicates the current total number of nearby cell in the c3gGsmNearbyCellTable. User can poll this object to get the total number of nearby cell before polling c3gGsmNearbyCellTable.

c3gGsmNearbyCellTable

Cellular 3G GSM nearby cell table. Object c3gGsmNumberOfNearbyCell indicates the total number of nearby cell in this table.

c3gGsmNearbyCellEntry

An entry (conceptual row) in the c3gGsmNearbyCellTable.

c3gGsmNearbyCellIndex

Nearby cell index, combined with entPhysicalIndex to access the Nearby cell table c3gGsmNearbyCellTable.

c3gGsmNearbyCellPrimaryScramblingCode

Nearby cell primary scrambling code.

c3gGsmNearbyCellRscp

Nearby cell Received Signal Code Power (RSCP).

c3gGsmNearbyCellEcIoMeasurement

Nearby cell Ec/Io measurement.

c3gGsmHistoryTable

Cellular 3G GSM history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string wi ...

c3gGsmHistoryEntry

An entry (conceptual row) in the c3gGsmHistoryTable.

c3gGsmHistoryRssiPerSecond

Per-second RSSI history. This object contains a per-second history of RSSI values for the last 60 seconds.

c3gGsmHistoryRssiPerMinute

Per-minute weakest RSSI value history. This object contains a per-minute history of weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.

c3gGsmHistoryRssiPerHour

Per-hour weakest RSSI value history. This object contains a per-hour history of weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.

c3gGsmSecurityTable

Cellular 3G GSM security table.

c3gGsmSecurityEntry

An entry (conceptual row) in the c3gGsmSecurityTable.

c3gGsmChv1

Card Holder Verification 1 (CHV1), if enabled, the PIN will be verified, if disabled, the PIN will not be verified.

c3gGsmSimStatus

SIM status. Indicates whether the SIM is present or removed from the SIM socket, and its current status.

c3gGsmSimUserOperationRequired

If the SIM is protected (for example, because of CHV1 enabled), it will indicate the type of user operation required.

c3gGsmNumberOfRetriesRemaining

Indicates the number of attempts remaining in case the SIM is locked. If the number of retries becomes zero, the SIM is blocked and becomes unusable.

c3gWanLbsCommonTable

This table contains information about the Cellular 3G Location Based service feature. This GPS data is provided by the 3G wireless modem as CnS info, upon GPS configuration.

c3gWanLbsCommonEntry

This entry contains information about the Cellular 3G Location Based service CnS variables returned by the wireless modem.

c3gLbsModeSelected

Mode of Location base service selected on CDMA/GSM. unKnown - mode selection unkown standAlone - Standalone mode msBased - MS-Based mode msAssist - MS-Assist mode reserved - reserved for future use

c3gLbsState

Location base service state on CDMA/GSM. gpsDisabled - GPS is disabled gpsEnabled - GPS is enabled gpsLocError - GPS encounters error gpsAcquiring - GPS is acquiring fix

c3gLbsLocFixError

Location base service fix error code on CDMA/GSM.

c3gLbsLatitude

Location base service Latitude of CDMA/GSM modem.

c3gLbsLongitude

Location base service longitude of CDMA/GSM modem.

c3gLbsTimeStamp

Location base service timestamp of CDMA/GSM modem.

c3gLbsLocUncertaintyAngle

GPS Uncertainty parameter Angle, in degrees for the Uncertainty info returned by the GPS device while doing a location fix.

c3gLbsLocUncertaintyA

GPS Uncertainty parameter A, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.

c3gLbsLocUncertaintyPos

GPS Uncertainty parameter position, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.

c3gLbsFixtype

The type of location fix in Location Base service. none - default case, while LBS is not enabled. twoDimension - 2D location fix. threeDimension - 3D location fix.

c3gLbsHeightValid

This object indicates whether the height returned by the GPS device is valid during location fix.

c3gLbsHeight

This object indicates the GPS height parameter returned by the GPS device while performing location fix.

c3gLbsLocUncertaintyVertical

GPS parameter vertical velocity parameter returned by the GPS device while performing location fix.

c3gLbsVelocityValid

This object indicates whether the Velocity value returned by the GPS device is valid.

c3gLbsHeading

The compass direction toward which the GPS receiver is (or should be) moving.

c3gLbsVelocityHorizontal

Horizontal Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last horizontal location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y ...

c3gLbsVelocityVertical

Vertical Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last vertical location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y sat ...

c3gLbsHepe

Horizontal Estimated Position Error returned by the GPS satellite for current position of the GPS device.

c3gLbsNumSatellites

Number of GPS satellites in vision to 3G GPS modem while GPS tracking is on.

c3gWanLbsSatelliteInfoTable

This table provides information on each satellite that is visible to the 3G modem during the location fix. These satellites guide the 3G device to acquire a 2D or 3D location fix.

c3gWanLbsSatelliteInfoEntry

This table provides information about each satellite's elevation, azimuth, Signal to Noise ratio (SNR) and its reference number local to the router.

c3gWanLbsSatelliteInfoIndex

An index that is assigned to each satellite under a 3G modem and in combination with entPhysicalIndex uniquely identify it. This index is assigned arbitrarily by the engine and is not saved over reboots.

c3gWanLbsSatelliteNumber

Each Satellite is assigned a unique number within this device.This object can be used to locate a particular satellite under a 3G modem.

c3gWanLbsSatelliteElevation

Angle of Elevation between the GPS antenna pointing direction, directly towards the satellite, and the local horizontal plane. It is the up-down angle

c3gWanLbsSatelliteAzimuth

Azimuth of the current satellite in context referenced by the Satellite InfoIndex. Azimuth is the degree of rotation of the satellites dish on its vertical plane.

c3gWanLbsSatelliteInfoSignalNoiseRatio

Signal to Noise Ratio(SNR) of received GPS signal. SNR is refered to as the signal strength in GPS standards.

c3gWanLbsSatelliteUsed

Is this satellite in line of sight to the 3G modem used in calculating the GPS location?

c3gWanLbsSatelliteInfoRowStatus

The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.

c3gSmsCommonTable

This table contains Cellular 3G SMS management MIB objects.

c3gSmsCommonEntry

An entry contains counters for the SMS messages received, placed, errored and archived on CDMA, GSM based modems.

c3gSmsServiceAvailable

This object indicates the availability of SMS Service.

c3gSmsOutSmsCount

Number of SMS messages which have been sent successfully.

c3gSmsOutSmsErrorCount

Number of SMS message that could not be sent.

c3gSmsInSmsStorageUsed

Number of SMS message records space used in the Incoming SMS message storage. One standard SMS message (cdma or gsm) occupies 1 unit of record storage space. A big SMS message can span 'n' sms record space but still be called as 1 SMS message. Storage use ...

c3gSmsInSmsStorageUnused

The number of SMS messages record space left unused in the Incoming SMS message storage. This is equal to c3gSmsInSmsStorageMax - c3gSmsInSmsStorageUsed.

c3gSmsInSmsArchiveCount

Number of successful archive of Incoming SMS messages since router reload. Each SMS message occupies x bytes of space. So if the incoming message is huge, then it is archived as multiple of x bytes but still called as one SMS message. This is the differen ...

c3gSmsInSmsArchiveErrorCount

The number of Incoming SMS messages that could not be archived since device was reloaded.

c3gSmsArchiveUrl

URL of the sms archive directory on the ftp server. The url will be of this format ftp://x.y.z.k/user/dirname

c3gSmsOutSmsStatus

Status of the last send operation of outgoing SMS message to the network.

c3gSmsInSmsCount

Number of SMS messages which have been received successfully and stored in router. These SMS's are a mirror copy of SMS stored in Modem(cdma) or SIM(gsm)

c3gSmsInSmsDeleted

Number of SMS messages which have been deleted since router boot up. This does not include SMS messages that are already archived.

c3gSmsInSmsStorageMax

Number of SMS message records space allocated in the router's DRAM to store Incoming SMS messages.

c3gSmsInSmsCallBack

Number of incoming SMS messages that triggered callback.

c3gSmsOutSmsPendingCount

Number of outgoing SMS messages that are in pending queue of the router.

c3gSmsOutSmsArchiveCount

Number of successfull archive of outgoing SMS messages since router reload.

c3gSmsOutSmsArchiveErrorCount

Number of failed archive of outgoing SMS messages since router reload.

c3gSmsInSmsArchived

Number of Incoming SMS messages that are successfully archived since router reload.

ciscoWan3gMIBCommonObjectGroup

A collection of common objects for Cellular 3G CDMA and GSM.

ciscoWan3gMIBCdmaObjectGroup

A collection of objects for Cellular 3G CDMA.

ciscoWan3gMIBGsmObjectGroup

A collection of objects for Cellular 3G GSM.

ciscoWan3gMIBLbsObjectGroup

A collection of common objects for Cellular 3G Location Based Service.

ciscoWan3gMIBSmsObjectGroup

A collection of common objects for Cellular 3G Short Messaging Service.