CISCO-WAN-FR-SIGNALING-MIB Download
The MIB module to configure LMI and CLLM
on a frame relay ports. This mib module also
contains objects to represent LMI and CLLM
statistics information. The frame relay logical
port is referred to as 'frame relay port' in this
mib. The 'logical port' refers to frame relay
port.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-WAN-FR-SIGNALING-MIB
- frPortCnfSigLMIGrpTable
- This table is for configuration of singaling(LMI) on frame relay ports.
- frPortCnfSigLMIGrpEntry
- An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
- lmiCnfPortNum
- The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
- signallingProtocolType
- The value of this object is used for configuring the LMI signaling protocol type. 1 - other. Not a valid value for SET request. 2 - noSignalling 3 - strataLMI 4 - annexAUNI 5 - annexDUNI 6 - annexANNI 7 - annexDNNI The ports with portType = frame-forward ...
- asynchronousUpdates
- This object is used for configuring asynchronous updates. The possible values are : disable(1) : disable Asynchronous Status Updates & Unsolicited Full Status enable(2) : enable Asynchronous Status Updates fsenable(3) : enable Unsolicited Fu ...
- t391LinkIntegrityTimer
- The value of this object identifies the desired User-side T391 link integrity verification polling timer value for this UNI/NNI logical port.
- t392PollingVerificationTimer
- The value of this object identifies the desired Network-side T392 polling verification timer value (nT2 for LMI) for this UNI/NNI logical port. This is the length of time the network should wait between Status Inquiry Messages.
- n391FullStatusPollingCounter
- The value of this object identifies the User-Side 391 full status polling cycle value for this UNI/NNI logical port.
- n392ErrorThreshold
- The value of this object identifies the desired User-side/Network-side N392 error threshold value for this UNI/NNI logical port.
- n393MonitoredEventCount
- The value of this object identifies the desired User-side/Network-side N393 monitored events count value for this UNI/NNI logical port.
- enhancedLmi
- This object enables/disables the Enhanced LMI (ELMI) on the frame relay port.
- portFRF1Dot2Support
- This object enables/disables the FRF 1.2 feature. This object is added for FRSM12. This object is not applicable to MGX Release 1.x REFERENCE FRF 1.2
- portLmiSigConfMethod
- This object enables/disables the port LMI signalling autosense. Setting this object to autosense(2) enables the port to autodetect and configure port LMI signalling type. signallingProtocolType mib should be set to noSignalling while this object is being ...
- frPortCntSigLMIGrpEntry
- An entry for each frame relay port. Each entry identifies the LMI statistics supported on a frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forw ...
- lmiSigPortNum
- The value of this object refers to the frame relay port. The value for this object must be same as the 'portNum' object defined in frPortCnfPortGrpTable. The frame forwarding port value is not valid for this object.
- rcvStatusInquiry
- The number of Status Inquiry messages received.
- rcvInvalidRequest
- The number of Invalid Request messages received.
- rcvUNISeqMismatch
- The number of times UNI messages with sequence number mismatches were received.
- xmtStatus
- The number of times Status response messages transmitted.
- xmtAsynchUpdate
- The number of times Asynch Status messages transmitted.
- uniSignalingTimeout
- The number of times UNI Status requests were not received.
- xmtStatusInquiry
- The number of Status Inquiry messages transmitted.
- rcvStatus
- The number of times Status response messages received.
- rcvAsynchUpdate
- The number of times Asynch Status messages received ::= { frPortCntSigLMIGrpEntry 10} SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION The number of times NNI messages with sequence number mismatches were received.
- nniSignalingTimeout
- The number of times NNI Status requests were not received.
- frPortCnfSigCLLMGrpTable
- This table is configuring the CLLM on frame relay ports. This table is not applicable for Frame Forwarding ports.
- frPortCnfSigCLLMGrpEntry
- An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
- cllmCnfPortNum
- The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
- cllmEnable
- This object is used for enabling/disabling CLLM on frame relay port. When set to 'disabled', CLLM is disabled. When set to 'enabled', CLLM is enabled.
- xmtCLLMStatusTimer
- Interval in milliseconds for CLLM to send CLLM updates.
- rcvCLLMStatusTimer
- Timeout value for receiving CLLM updates.
- frPortCntSigCLLMGrpTable
- This table is for CLLM statistics for frame relay ports.
- frPortCntSigCLLMGrpEntry
- An entry for frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
- cllmSigPortNum
- The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
- rcvFramesCLLM
- The number of CLLM frames received.
- rcvBytesCLLM
- The number of CLLM bytes received.
- xmtFramesCLLM
- The number of CLLM frames transmitted.
- xmtBytesCLLM
- The number of CLLM bytes transmitted.
- cllmFailures
- The number of times an expected CLLM message was not received.
- ciscoWanFrLmiConfigGroup
- A collection of objects providing information applicable to Frame Relay Logical Ports (Frame Relay Ports).
- ciscoWanFrLmiStatsGroup
- A collection of objects providing information applicable to LMI statistics on Frame Relay Ports.
- ciscoWanFrCllmGroup
- A collection of objects providing information on CLLM applicable to Frame Relay Ports.
- ciscoWanFrCllmStatsGroup
- A collection of objects providing information applicable to CLLMI statistics on Frame Relay Ports.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
