CISCO-WAN-MG-MIB Download

mgName

Denotes name of the MG, as it is identified by media gateway controllers. This corresponds to a domain name under which the Media Gateway could also be registered in a DNS.

mgAdministrativeState

This object indicates the current admin state of the Media Gateway. The possible admin states are: 'inService' - The MG is ready to provide service. In this state, the MG will respond to connection control requests, emit autonomous messages to MGCs as app ...

mgAdministrativeStateControl

This control object is used to change the service state of the MG from 'inService' to 'commandedOutOfService' and from 'commandedOutOfService' to 'inService'. The resulting service state of the gateway is represented by 'mgAdministrativeState'. If set, th ...

mgShutdownGraceTime

This object indicates the time in seconds after which an MG will transition from 'gracefulOutOfService' to 'forcefulOutOfService'. A value of -1 indicates that the MG allows for draining, i.e. will automatically transition after the last resource in use h ...

mgSupportedProtocolTable

This is a table which identifies the protocols, along with their revisions that the media gateway supports for purposes of communication with an MGC. The table is created by the agent at system startup and cannot changed.

mgSupportedProtocolEntry

Represents an individual table entry in mgSupportedProtocolTable.

mgProtocolNumber

Serves as index to this table.

mgProtocolName

A control protocol and its revision supported by the call gateway. For example: 'MGCP 0.1 11/9/99' The protocol can be one of the control protocols like MGCP or it can be a signaling backhaul protocol or it can be resource co-ordination protocol like SRCP ...

maxConcurrentMgcs

This object identifies the maximum number of MGCs the MG can have.

mgcTable

This is a table which contains information about the individual MGCs.

mgcEntry

Represents an individual table entry in mgcTable.

mgcNumber

Serves as index to this table.

mgcName

Denotes the name of the media gateway controller. This corresponds to a domain name under which the MGC could also be registered in a DNS. Once the row has become active, this value may not be modified.

mgcDnsResolution

Indicates how the MG resolves the IP address of the MGC. 'true(1)' - the resolution is done using an external DNS server. 'false(2)' - the resolution is done using mgcResolutionTable.

mgcAssociationState

Represents the state of the association between the MG and the MGC. The possible values are: 'mgcUnassociated' : MG and MGC are not associated. For example, in the case where MGCP is the coordination protocol, it means no subscription to autonomous messag ...

mgcAssociationStateControl

Used to control the association state, as represented by mgcAssociationState. The possible value for a set operation on this object are: 'mgcUnassociate': Transition from any state to 'mgcUnassociated'. If registered, MG will initiate deregistration. 'mgc ...

mgcUnassociationPolicy

Indicates what MG will do when mgcAssociationState transitions to unassociated. 'mgcNoAction' : indicates that MG will take no further action. In particular, no resources will be released nor connections be flushed. 'mgcRelease' : indicates that upon una ...

mgcCommLossUnassociationTimeout

Indicates how long, in seconds, upon detection of a communication loss, subscriptions to autonomous notifications (such as notification requests and RSIPs in the case of MGCP) remain valid and communications will be reattempted for an MGC in 'mgcAssociate ...

mgcRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. When the row is successfully created, the RowStatus would be set to 'active' by the agent. An entry may be deleted by setting the RowStatus to 'de ...

mgcProtocolTable

This table contains information about which protocols are being used in a particular association between the gateway and the MGCs. Because there may be a number of different protocols in use for a particular control association between the gateway and an ...

mgcProtocolEntry

Represents an individual table entry in mgcProtocolTable. mgcNumber references the media gateway controller, constituting a foreign key into mgcTable and adapting the value of mgcNumber of that MGC. mgProtocolNumber references the protocol, reflecting the ...

mgcProtocolRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. When the row is successfully created, the RowStatus would be set to 'active' by the agent. An entry may be deleted by setting the RowStatus to 'de ...

mgEndpointCreationPolicy

Identifies whether the MG creates endpoints for connections involving single channels (e.g. DS0s) dynamically upon receipt of a create connection request in the control protocol, or whether the endpoints have to be configured statically. This does not app ...

mgEndpointTable

This table contains information about the individual endpoints.

mgEndpointEntry

Represents an individual table entry in mgEndpointTable.

mgEndpointNumber

Identifies endpoint as it is known by the NE. The endpoint number is unique for the entire MG and ranges from 1 to the maximum number of endpoints that the MG can support.

mgEndpointLineNumber

Identifies the DS1 line. Generally, this will correspond to the ifIndex of the physical interface terminating the line. Once the row has become active, this value may not be changed.

mgEndpointName

Identifies endpoint as it is known by the MGC. If MG and MGC use a mutually agreed upon convention, this may be supplied by the agent, i.e. be read-only.

mgEndpointSpeed

Indicates the endpoint's bandwidth, in Kbps. Typically, this will be 64 times the number of channels terminated by the endpoint.

mgEndpointState

Indicates the state of the endpoint. 'mgEndpointActive' - the endpoint is in service and operational. 'mgEndpointFailed' - the endpoint is in service but not operational, e.g. because a line that the endpoint belongs to is in a state of service affecting ...

mgEndpointChannelMap

Bit map of DS0s used by the endpoint. Bit positions set to '1' represent DS0s used by the endpoint. The Bit position corresponds to the DS0 number. Once the row has become active, this value may not be changed.

mgEndpointRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. When the row is successfully created, the RowStatus would be set to 'active' by the agent thereby creating an endpoint. An endpoint may be deleted ...

lineAssignmentTable

This table contains information about each line in the media gateway.

lineAssignmentEntry

Represents an individual table entry in lineAssignmentTable.

lineNumber

Identifies the DS1 line. Generally, this will correspond to the ifIndex of the physical interface terminating the line.

channelAssignment

Each bit that is set represents that the corresponding DS0 is in use, either because it has been assigned to an endpoint or because it constitutes a signaling channel that is not available for assignment to an endpoint.

lineName

Line name as identified by the MGC, if applicable. The default line name is 'LINE'. If MG uses a common convention, this may be supplied by the agent, i.e. be read-only.

mgcResolutionTable

This table provides the name to IP address mapping for each of the MGCs, external DNS server, tftp server and announcement server. It also stores the IP addresses of external resolved domain name. Several addresses may be associated with a single name.

mgcResolutionEntry

Represents an individual table entry in mgcResolutionTable.

mgcResolutionIndex

Serves as index to this table. The table will be divided into two, index 1 to 88 will be used by the user and index 89 to 176 will be used by the VDNS to fill in the externally resolved IP address.

mgcResolutionName

Denotes the name of the entity (MGC and/or NE) whose address is to be resolved. Once the row has become active, this value may not be changed.

mgcResolutionIpAddress

Denotes the IP address of the entity. Once the row has become active, this value may not be changed. To change the IP address, an entry will have to be removed and a new entry will have to be added.

mgcResolutionCommState

Indicates whether the address is the one currently applied for communications with the system of that name. 'csActive' - name resolves to that IP address 'csInactive' - IP address currently not in use On creation of the row, this value will be 'csInactive ...

mgcResolutionPreference

This object can be used by the MG in the selection of an IP address if multiple IP addresses are available for the same name. This object cannot be modified after this entry is created. It has to be unique among various IP addresses of a same domain name ...

mgcResolutionRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. mgcResolutionIndex, mgcResolutionName, mgcResolutionIpAddress, and mgcResolutionPreference should be provided when creating an entry. mgcResolutio ...

mgcDnsResolutionFlag

All entries statically configured by the customer (i.e. all entries in the top half of the table) will have the flag set to 'internal'. All IP addresses obtained due to external resolution of the domain name (that is, entries in the bottom half of the tab ...

mgDomainNameTable

This table provides the domain names that are configured by users. The domain names could refer to Call Agents, tftp server for CAS file download, external DNS server or announcement server.

mgDomainNameEntry

Represents an individual table entry in mgDomainNameTable.

mgDomainNameIndex

This object serves as index to this table.

mgDomainName

This object denotes the domain name of MGCs, tftp server, external DNS server or announcement server. Once the row has become active, this value may not be changed.

mgDnsResolutionType

This object determines the kind of DNS resolution to be applied for a particular domain name. 'internalOnly' means that the gateway will not try to resolve the IP address for this domain name using external DNS. The IP address/es for this domain name will ...

mgDomainNameRowStatus

Controls the creation and deletion and of a table entry. An entry may be created using the 'createAndGo' option. User can only set mgDnsResolutionType to 'internalOnly'. The request to set an entry with mgDnsResolutionType of 'externalOnly', 'internalFir ...

mgEndpointExtTable

This table extends the mgEndpointTable. Objects that do not directly describe the endpoint but extend the rules to configure the mgEndpointTable can be added to this table. Each table entry describes an instance of an endpoint on a media gateway.

mgEndpointExtEntry

Each entry represents a media gateway endpoint interface.

mgEndpointRepetition

This object is used to create multiple rows in the mgEndpointTable as specified in the SNMP PDU, starting from the row specified by the index of the instance for the number of rows specified in this object. The repetition operation will start from the mgE ...

mediaGatewayGroup

This group contains objects that apply to the media gateway as a whole, such as global parameters and state.

mediaGatewayControllerGroup

This group contains objects that describe the Media Gateway Controllers with which the Media gateway communicates.

mediaGatewayEndpointGroup

This group contains objects describing the media gateway's endpoints.

mediaGatewayLineGroup

This group contains objects which relate lines to endpoints. These objects complement the information contained in a line MIB.

mediaGatewayControllerResolutionGroup

This group contains information to resolve names to IP addresses in the absence of DNS support.

mediaGatewayControllerGroup1

This group contains objects that describe the MGCs with which the MG communicates.

mediaGatewayControllerResolutionGroup1

This group contains information to resolve names to IP addresses both in the absence of DNS support and with DNS support.

mediaGatewayDomainNameGroup

This group contains domain names and information about how these domain names will be resolved.

mediaGatewayControllerGroup2

This group contains objects that describe the Media Gateway Controllers with which the Media gateway communicates.

mediaGatewayEndptRepetitionGroup

This group contains repetition objects describing the media gateway's endpoints as defined in the mgEndpointExtTable.