CISCO-WAN-SONET-MIB

CISCO-WAN-SONET-MIB Download

MIBs list

The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558).

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-WAN-SONET-MIB

cwsSectionAlarmTable
The SONET/SDH Section Alarm table. This table contains objects for setting alarm thresholds and reading alarm severity.
cwsSectionAlarmEntry
An entry in the alarm table. The entries exist for active sonet lines, with default threshold values. Thresholds may be configured for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS) and coding violations(CV) fo ...
cwsSectionStatisticalAlarmSeverity
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsSectionCurrentESsThreshold
This object indicates the threshold for errored seconds(ES), for the current 15-min interval, above which alarm is generated.
cwsSectionTotalESsThreshold
This object indicates the threshold for errored seconds(ES), for the 24 hour interval, above which alarm is generated.
cwsSectionCurrentSESsThreshold
This object indicates the threshold for severely errored seconds(SES) for the current 15-min interval, above which alarm is generated.
cwsSectionTotalSESsThreshold
This object indicates the threshold for severely errored seconds(SES) for the 24 hour interval, above which alarm is generated.
cwsSectionCurrentSEFSsThreshold
This object indicates the threshold for severely errored framing seconds(SEFS), above which alarm is generated.
cwsSectionTotalSEFSsThreshold
This object indicates the threshold for severely errored framing seconds(SEFS) for the 24 hour interval, above which alarm is generated.
cwsSectionCurrentCVsThreshold
This object indicates the threshold for coding violations(CV), above which alarm is generated.
cwsSectionTotalCVsThreshold
This object indicates the threshold for coding violations(CV) for 24 hour interval, above which alarm is generated.
cwsSectionStatAlarmStatus
This variable indicates the status of the interface. When an alarm is raised, this would indicate which threshold was exceeded. This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-m ...
cwsSectionCurrent24HrTable
Contains sonet section related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionCurrent24HrTable table get reset to 0.
cwsSectionCurrent24HrEntry
An entry in the current 24 hour table. The entries exist for active sonet lines.
cwsSectionCurrent24HrESs
Number of errored seconds encountered in current 24 hour interval.
cwsSectionCurrent24HrSESs
Number of SESs encountered in current 24 hour interval.
cwsSectionCurrent24HrSEFSs
Number of SEFSs encountered in current 24 hour interval.
cwsSectionCurrent24HrCVs
Number of CVs encountered in current 24 hour interval.
cwsSectionPrevious24HrTable
Contains sonet section previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionPrevious24HrTable table get reset to 0.
cwsSectionPrevious24HrEntry
An entry in the current 24 hour table. The entries exist for active sonet lines.
cwsSectionPrevious24HrESs
Number of errored seconds encountered in previous 24 hour interval.
cwsSectionPrevious24HrSESs
Number of SESs encountered in previous 24 hour interval.
cwsSectionPrevious24HrSEFSs
Number of SEFSs encountered in previous 24 hour interval.
cwsSectionPrevious24HrCVs
Number of CVs encountered in previous 24 hour interval.
cwsLineAlarmTable
The SONET/SDH Line Alarm table. This table contains objects which are thresholds that the user can set. Once the threshold is exceeded, an alarm is flagged.Changing any threshold will affect both the Near End and Far End(remote end of the line) threshold ...
cwsLineAlarmEntry
An entry in the SONET/SDH Line Alarm table. The entries may be created for an ifType value of sonet(39). Thresholds maybe specified for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS),coding violations(CV) and u ...
cwsLineStatisticalAlarmSeverity
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsLineCurrentESsThreshold
This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalESsThreshold
This object indicates the threshold for errored seconds(ES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentSESsThreshold
This is the severely errored seconds(SES) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalSESsThreshold
This is the severely errored seconds(SES) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentCVsThreshold
This is the Coding violations(CV) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalCVsThreshold
This is the Coding violations(CV) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentUASsThreshold
This is the Unavailable Seconds(UAS) threshold for the current 15-min, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalUASsThreshold
This is the Unavailable Seconds(UAS) threshold for the 24 hour interval above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineStatAlarmStatus
This variable indicates the status of the sonet line. This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-min window, the object is cleared from the lower level sonet task. The cws ...
cwsLineCurrent24HrTable
Contains sonet line related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLineCurrent24HrTable table get reset to 0.
cwsLineCurrent24HrEntry
An entry in the current 24 hour table. The entries exist for active sonet lines.
cwsLineCurrent24HrESs
Number of errored seconds encountered in current 24 hour interval.
cwsLineCurrent24HrSESs
Number of SESs encountered in current 24 hour interval.
cwsLineCurrent24HrCVs
Number of CVs encountered in current 24 hour interval.
cwsLineCurrent24HrUASs
Number of UASs encountered in current 24 hour interval.
cwsFELineCurrent24HrESs
Number of far end errored seconds encountered in current 24 hour interval.
cwsFELineCurrent24HrSESs
Number of far end SESs encountered in current 24 hour interval.
cwsFELineCurrent24HrCVs
Number of far end CVs encountered in current 24 hour interval.
cwsFELineCurrent24HrUASs
Number of far end UASs encountered in current 24 hour interval.
cwsLinePrevious24HrTable
Contains sonet line previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLinePrevious24HrTable table get reset to 0.
cwsLinePrevious24HrEntry
An entry in the current 24 hour table. The entries exist for active sonet lines.
cwsLinePrevious24HrESs
Number of errored seconds encountered in previous 24 hour interval.
cwsLinePrevious24HrSESs
Number of SESs encountered in previous 24 hour interval.
cwsLinePrevious24HrCVs
Number of CVs encountered in previous 24 hour interval.
cwsLinePrevious24HrUASs
Number of UASs encountered in previous 24 hour interval.
cwsFELinePrevious24HrESs
Number of far end errored seconds encountered in previous 24 hour interval.
cwsFELinePrevious24HrSESs
Number of far end SESs encountered in previous 24 hour interval.
cwsFELinePrevious24HrCVs
Number of far end CVs encountered in previous 24 hour interval.
cwsFELinePrevious24HrUASs
Number of far end UASs encountered in previous 24 hour interval.
cwsPathAlarmTable
The SONET/SDH Path Alarm table. This table contains objects for thresholds which a user can set. When any threshold is exceeded, an alarm is set. Changing any threshold will affect both the Near End and Far End(remote end of the line) threshold.
cwsPathAlarmEntry
An entry in the SONET/SDH Path Alarm table. Thresholds maybe specified for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS),coding violations(CV) and unavailable seconds (UAS) for path layer of sonet lines. Once ...
cwsPathStatisticalAlarmSeverity
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsPathCurrentESsThreshold
This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line).
cwsPathTotalESsThreshold
This object indicates the threshold for errored seconds(ES) for the 24-hour interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line).
cwsPathCurrentSESsThreshold
This object indicates the threshold for severely errored seconds(SES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalSESsThreshold
This object indicates the threshold for severely errored seconds(SES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathCurrentCVsThreshold
This is the coding violations threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalCVsThreshold
This is the coding violations threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathCurrentUASsThreshold
This is the unavailable seconds threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalUASsThreshold
This is the unavailable seconds threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathStatAlarmStatus
This variable indicates the status of the interface. The cwsPathStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The following ar the bit p ...
cwsPathCurrent24HrTable
Contains sonet path related current 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathCurrent24HrTable table get reset to 0.
cwsPathCurrent24HrEntry
An entry in path current table.
cwsPathCurrent24HrESs
Number of errored seconds encountered in current 24 hour interval.
cwsPathCurrent24HrSESs
Number of SESs encountered in current 24 hour interval.
cwsPathCurrent24HrCVs
Number of CVs encountered in current 24 hour interval.
cwsPathCurrent24HrUASs
Number of UASs encountered in current 24 hour interval.
cwsFEPathCurrent24HrESs
Number of far end errored seconds encountered in current 24 hour interval.
cwsFEPathCurrent24HrSESs
Number of far end SESs encountered in current 24 hour interval.
cwsFEPathCurrent24HrCVs
Number of far end CVs encountered in current 24 hour interval.
cwsFEPathCurrent24HrUASs
Number of far end UASs encountered in current 24 hour interval.
cwsPathPrevious24HrTable
Contains sonet path previous 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathPrevious24HrTable table get reset to 0.
cwsPathPrevious24HrEntry
An entry in path current table.
cwsPathPrevious24HrESs
Number of errored seconds encountered in current 24 hour interval.
cwsPathPrevious24HrSESs
Number of SESs encountered in current 24 hour interval.
cwsPathPrevious24HrCVs
Number of CVs encountered in current 24 hour interval.
cwsPathPrevious24HrUASs
Number of UASs encountered in current 24 hour interval.
cwsFEPathPrevious24HrESs
Number of far end errored seconds encountered in previous 24 hour interval.
cwsFEPathPrevious24HrSESs
Number of far end SESs encountered in previous 24 hour interval.
cwsFEPathPrevious24HrCVs
Number of far end CVs encountered in previous 24 hour interval.
cwsFEPathPrevious24HrUASs
Number of far end UASs encountered in previous 24 hour interval.
ciscoWANSonetSectAlarmMIBGroup
These are objects related to ciscoSonet alarm group
ciscoWANSonetSectPrev24HrMIBGroup
Sonet section previous 24 hour counter objects.
ciscoWANSonetLineAlarmMIBGroup
These are objects related to ciscoSonet line alarm group.
ciscoWANSonetFELineAlarmMIBGroup
These are sonet far end line current 24 hour counter objects.
ciscoWANSonetLinePrev24HrMIBGroup
Sonet line previous 24 hour counter objects.
ciscoWANSonetFELinePrev24HrMIBGroup
Far end sonet line previous 24 hour counter objects.
ciscoWANSonetPathAlarmMIBGroup
These are objects related to ciscoSonet path alarm group
ciscoWANSonetFEPathAlarmMIBGroup
These are far end sonet path current 24 hour counter objects.
ciscoWANSonetPathPrev24HrMIBGroup
Sonet path previous 24 hour counters.
ciscoWANSonetFEPathPrev24HrMIBGroup
Theses are far end sonet path previous 24 hour counter objects.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list