CISCO-WIRELESS-DOCS-EXT-MIB Download

cwdxQosCtrlUpTable

For each upstream interface, this table maintains a number of objects related to Quality of Service scheduler. These objects are used to control SU registration.

cwdxQosCtrlUpEntry

A list of attributes for each upstream MAC scheduler that supports Quality of Service. Entries in this table exist for each ifEntry with ifType of propDocsWirelessUpstream(nnn).

cwdxQosCtrlUpAdmissionCtrl

The admission control status for this upstream entry. When this object is set to 'true', the upstream scheduler will check the virtual reserved bandwidth remaining before giving admission to this new SU. If there is not enough reserved bandwidth to serve ...

cwdxQosCtrlUpMaxRsvdBWPercent

The percentage of upstream maximum reserved bandwidth to the raw bandwidth if the admission control is enabled on this upstream. For example, if the upstream interface has raw bandwidth 1,600,000 bits/second and cwdxQosCtrlUpMaxRsvdBWPercent is 200 percen ...

cwdxQosCtrlUpAdmissionRejects

The count of SU registration requests rejected on this upstream interface. The rejection is due to insufficient available bandwidth for this SU. The requests are rejected only when cwdxQosCtrlUpAdmissionCtrl is 'true' on this upstream interface.

cwdxQosCtrlUpReservedBW

The current total reserved bandwidth in bits per second of this upstream interface. It is the sum of all SUs' minimum guaranteed bandwidth in bits per second currently supported on this upstream.

cwdxQosCtrlUpMaxVirtualBW

The maximum virtual bandwidth capacity of this upstream interface if the admission control is enabled. It is the raw bandwidth in bits per second times the percentage. If the admission control is disabled, then this object will contain the value zero.

cwdxQosIfRateLimitTable

This table describes the attributes of rate limiting for schedulers in upstream and downstream interfaces that support Quality of Service. The rate limiting process is to ensure the Quality of Service and fairness.

cwdxQosIfRateLimitEntry

List of the rate limiting attributes for upstream and downstream interfaces schedulers that support Quality of Service. Entries in this table exist for each ifEntry with ifType of propDocsWirelessUpstream(nnn) and propDocsWirelessDownstream(nnn).

cwdxQosIfRateLimitAlgo

To ensure fairness, at the upstream, the HE will throttle the rate of bandwidth grants, such that the flow never gets more than its provisioned peak rate in bps. Similarly at the downstream, HE controls the packets sent such that flow never gets more tha ...

cwdxQosIfRateLimitExpWgt

Weight for exponential moving average of loss rate, when using weighted excess packet discard algorithm. The higher values of the weight make the algorithm more sensitive to the recent bandwidth usage by the Sid. The default value is 1. Whenever the rate ...

cwdxQosIfRateLimitShpMaxDelay

The maximum shaping delay in milliseconds. That is, the maximum amount of time for which the HE will allow buffering of any rate exceeded flow. If the max buffering delay is large, then grants/packets of the flow will be buffered for a longer period of ti ...

cwdxQosIfRateLimitShpGranularity

The width in milliseconds of each element in shaping delay queue, that is, the shaping granularity. The shaping granularity is only applied to rate limit algorithm: Token bucket algorithm with shaping. It controls how accurately the algorithm quantizes th ...

cwdxHeServiceExtTable

The list contains the additional attributes of a single Service ID that provided by cwdIfHeServiceEntry.

cwdxHeServiceExtEntry

Additional objects for cwdIfHeServiceTable entry including downstream traffic statistics and excess counts against the Quality of Service limits for each Service ID.

cwdxIfHeServiceOutOctets

The cumulative number of Packet Data octets sent for this Service ID.

cwdxIfHeServiceOutPackets

The cumulative number of Packet data packets sent for this Service ID.

cwdxQosMaxUpBWExcessRequests

The number of upstream bandwidth requests which exceeds the maximum upstream bandwidth allowed for a service defined in the Quality of Service profile associated with this Sid. The request which exceeds the maximum upstream bandwidth allowed will be rejec ...

cwdxQosMaxDownBWExcessPackets

The number of downstream bandwidth packets which exceeds the maximum downstream bandwidth allowed for a service defined in the Quality of Service profile associated with this Sid. The packet which exceeds the maximum downstream bandwidth allowed will be d ...

cwdxBWQueueTable

This table describes the attributes of queues in wireless interfaces schedulers that support Quality of Service.

cwdxBWQueueEntry

The list of queue attributes in upstream and downstream interfaces schedulers that supports Quality of Service. Entries in this table exist for each ifEntry with ifType of propDocsWirelessUpstream(nnn) and propDocsWirelessDownstream(nnn).

cwdxBWQueueNameCode

The name code for the queue. cirQ: CIR queue. The queue is for Committed Information Rate (CIR) type of service which serves Service IDs which have minimum guaranteed rate in its QoS profile. tbeQ: TBE queue. The queue is for TIERED BEST EFFORT type servi ...

cwdxBWQueueOrder

The relative order of this queue to the other queues within the wireless interface. The smaller number has higher order. That is, 0 is the highest order and 10 is the lowest order. The scheduler will serve the requests in higher order queue up to the num ...

cwdxBWQueueNumServedBeforeYield

The maximum number of requests/packets the scheduler can serve before yielding to another queue. The value 0 means all requests must be served before yielding to another queue.

cwdxBWQueueType

The queuing type which decides the position of a request/packet within the queue. unknown : queue type unknown. other : not fifo, and not priority. fifo : first in first out. priority: each bandwidth request has a priority and the position of the req ...

cwdxBWQueueMaxDepth

The maximum number of requests/packets which the queue can support.

cwdxBWQueueDepth

The current number of requests/packets in the queue.

cwdxBWQueueDiscards

The number of requests/packets discarded because of queue overflow (queue depth > queue maximum depth).

cwdxCpeTable

This table contains information about Customer Premises Equipments (CPE).

cwdxCpeEntry

The list contains information for a Customer Premises Equipment (CPE) connected to SUs. An entry exists for each Customer Premises Equipment connected to a subscriber-unit supported by HE.

cwdxCpeStatusIndex

Index to an entry in cwdIfHeSuStatusTable identifying status of the SU (which the CPE connects to.)

cwdxCpeMacAddress

The Mac address to identify a Customer Premises Equipment.

cwdxCpeIpAddress

Ip address of the Customer Premises Equipment.

cwdxCpeAccessGroup

ASCII text to identify the Access Group for a CPE. Access Group is to filter the upstream traffic for that CPE.

cwdxSuMappingTable

This table contains a mapping between the SU Mac Address and the cwdIfHeSuStatusIndex which identifies a row in cwdIfHeSuStatusTable which lists the attributes of an SU.

cwdxSuMappingEntry

There exists an entry in this table for every SU connected to the HE. Each entry contains a mapping from the SU's mac address to the cwdIfHeSuStatusIndex.

cwdxSuMappingMacAddress

The Mac address to identify a Subscriber-unit.

cwdxSuMappingStatusIndex

Index to an entry in cwdIfHeSuStatusTable identifying status of the SU.

cwdxHeSuStatusExtTable

The list contains the additional SU status information.

cwdxHeSuStatusExtEntry

Additional objects for cwdIfHeSuStatusTable entry.

cwdxHeSuStatusValue

Current Subscriber-unit connectivity state. The object extends states in cwdIfHeSuStatusValue in more detail. The enumerations are: offline(1) : SU considered offline. others(2) : states is in cwdIfHeSuStatusValue. initRangingRcvd(3) ...

cwdxIfHeSuStatusOnlineTimes

The number of times that the SU changes the connectivity state from 'offline' to 'online' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of ...

cwdxIfHeSuStatusPercentOnline

The percentage of time that the SU stays 'online' over the time period from the SU's first ranging message received by HE until now. The value for this object is 100 times bigger than the real percentage value. For example, 32.15% will be value 3215. The ...

cwdxIfHeSuStatusMinOnlineTime

The minimum period of time the SU stayed 'online' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessDi ...

cwdxIfHeSuStatusAvgOnlineTime

The average period of time the SU stayed 'online' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessDi ...

cwdxIfHeSuStatusMaxOnlineTime

The maximum period of time the SU stayed 'online' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessDi ...

cwdxIfHeSuStatusMinOfflineTime

The minimum period of time SU stayed 'offline' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessDisab ...

cwdxIfHeSuStatusAvgOfflineTime

The average period of time the SU stayed 'offline' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessD ...

cwdxIfHeSuStatusMaxOfflineTime

The maximum period of time the SU stayed 'offline' over the time period from the SU's first ranging message received by HE until now. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessD ...

cwdxIfHeSuStatusDynSidCount

The number of active dynamic sids on this SU.

cwdxHeMacExtTable

This table contains the additions attributes of a HE MAC interface that provided by cwdIfHeMacTable.

cwdxHeMacExtEntry

Additional objects for cwdIfHeMacTable entry including the Subscriber-unit notification enable/disable and the interval of Subscriber-unit notification sent by the HE for a Subscriber-unit that the Mac interface supports. An entry in this table exists for ...

cwdxHeSuOnOffTrapEnable

An indication of whether the cwdxHeSuOnOffNotification is enabled. The default value is false(2).

cwdxHeSuOnOffTrapInterval

The interval for cwdxHeSuOnOffNotification sent by HE for one online/offline state change if cwdxHeSuOnOffTrapEnable is true. If there are more than one state changes to online/offline for a Subscriber-unit during this interval, only one cwdxHeSuOnOffNoti ...

cwdxHeSuDefaultMaxCpes

The default maximum number of permitted CPEs per SU in this wireless interface. A SU can override this value by setting the object cwdxHeSuMaxCpeNumber in the cwdxHeSuTable. The value 0 means no maximum limit. The default value for this object is 0. Setti ...

cwdxHeTotalSusRegistered

Total number of SUs that successfully registered at least once with this HE. This count will be decremented whenever the SUs are aged out at the HE.

cwdxHeTotalSusOffline

Total number of SU's that are offline at this time. The SU is considered as 'online' when the value for cwdxHeSuStatusValue is any of the values: online(5), onlineNetAccessDisabled(6), onlineKekAssigned(7), and onlineTekAssigned(8), and the SU is consider ...

cwdxHeSuChOverTimeExpiration

The time period to expire a HE channel override operation. Within the time period, if the HE cannot send out a RNG-RSP message with channel override fields to a SU specified in the operation, the HE will abort the operation. The possible reason is that th ...

cwdxHeSuChOverTable

A table of HE operation entries to instruct Subscriber-units to move to a new downstream and/or upstream channel. An entry in this table is an operation that has been initiated from HE to generates downstream frequency and/or upstream channel override fie ...

cwdxHeSuChOverEntry

An HE operation entry to instruct a Subscriber-unit to move to a new downstream and/or upstream channel. There can be more than one entry per Subscriber-unit, so there is a time stamp for each entry to show the time when this operation is initiated. A man ...

cwdxHeSuChOverSerialNumber

Object which specifies a unique entry in the table. A management station wishing to initiate a channel override operation should use a pseudo-random value for this object when creating or modifying an instance of a cwdxHeSuChOverEntry.

cwdxHeSuChOverMacAddress

The mac address of the Subscriber-unit that the HE instructs to move to a new downstream and/or upstream channel. This column must be set to a valid Mac address currently in the HE in order for this entry's row status to be set to active successfully.

cwdxHeSuChOverDownFrequency

The new downstream frequency which the Subscriber-unit is instructed to move to. The value 0 is to ask the HE not to override the downstream frequency.

cwdxHeSuChOverUpChannelId

The new channel Id which the Subscriber-unit is instructed to move to. The value -1 is to ask the HE not to override the upstream channel Id.

cwdxHeSuChOverTrapOnCompletion

Specifies whether or not a cwdxHeSuChOverNotification should be issued on completion of the operation. If such a notification is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such ...

cwdxHeSuChOverOpInitiatedTime

The value of sysUpTime at which the operation was initiated. Since it is possible to have more than one entry in this table for a Subscriber-unit, this object can help to distinguish the entries for the same Subscriber-unit.

cwdxHeSuChOverState

The status of the specified channel override operation. The enumerations are: messageSent(1): the HE has sent a RNG-RSP message with channel override to the Subscriber-unit. commandNotActive(2): the command is not in active mode due to this entry's row st ...

cwdxHeSuChOverRowStatus

The status of this table entry. This value for cwdxHeSuChOverMacAddress must be valid Mac address currently in the HE in order for the row status to be set to active successfully. Once the row status becomes active and state becomes waitToSendMessage, the ...

cwdxHeSuTable

This table contains attributes or configurable parameters for Subscriber-units from a HE.

cwdxHeSuEntry

The list contains a SU's attributes or configurable parameters from a HE.

cwdxHeSuMaxCpeNumber

The maximum number of permitted CPEs connecting to the SU. The value -1 means to use the default value of maximum hosts per SU in the HE wireless interface which the SU connects to and the value is defined in cwdxHeSuDefaultMaxCpes in the cwdxHeMacExtTabl ...

cwdxQosProfileExtTable

This table contains additional attributes to the Qos profiles that exists in cwdIfQosProfileTable in CISCO-WIRELESS-DOCS-IF-MIB.

cwdxQosProfileExtEntry

Each row extends the existing row in the cwdIfQosProfileTable with additional QOS parameters.

cwdxQosProfGrantInterval

The value of this parameter specifies the interval between successive data grant opportunities for a service flow. This object is required for Unsolicited Grant and Unsolicited Grant with Activity Detection Service Flows. This object is optional for Real- ...

cwdxQosProfGrantSize

This parameter specifies the unsolicited grant size.

cwdxQosProfName

This object is a string used to describe this Qos Profile. It has informational significance only.

cwdxQosProfTosOverwriteMask

This object is the bit mask (8 bit wide) for tos-overwrite feature. The cwdxQosProfTosOverwriteValue is written where the mark bits are set to 1. Tos-overwrite allows the HE to mark egress IP packets (from the HE) with a specific TOS value. This relieves ...

cwdxQosProfTosOverwriteValue

This object is the byte value for tos-overwrite. The cwdxQosProfTosOverwriteValue is written where the mark bits are set to 1. Each packet received from an SU that matches this QoS profile will be tagged with the cwdxQosProfTosOverwriteValue value at the ...

cwdxQosIpTosRatelimitTable

Describes the Ip-precedence attached to every Qos Profile identified by a row in cwdIfQosProfileTable in CISCO-WIRELESS-DOCS-IF-MIB.

cwdxQosIpTosRatelimitEntry

Describes the Ip Precedence parameters. For every QOS profile entry in the cwdIfQosProfileTable, there will be seven corresponding rows in this cwdxQosIpTosRatelimitTable. The default value of 0 will be assigned to cwdxQosIpTosRatelimitMaxDownRate for all ...

cwdxQosIpTosRatelimitIndex

The index value along with the primary index of cwdIfQosProfIndex which uniquely identifies an entry in the cwdxQosIpTosRatelimitEntry.

cwdxQosIpTosRatelimitMaxDownRate

Maximum downstream rate that can be allowed with this IP precedence.

cwdxQosCtrlGroup

Group of objects implemented in HE wireless interfaces for states of the scheduler supporting Data-Over-Cable Service Interface Specifications (DOCSIS) 1.0 Quality of Service (QoS).

cwdxQosQueueGroup

Group of objects implemented in HE wireless interfaces for the queuing states of the scheduler supporting Data-Over-Cable Service Interface Specifications (DOCSIS) 1.0 Quality of Service (QoS). Each upstream scheduler maintains a queue set, but the downst ...

cwdxHeSuCpeGroup

Group of objects implemented in HE for managing and monitoring Customer Premises Equipments.