CPQFCA Download

cpqFcaMibRevMajor

The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the support ...

cpqFcaMibRevMinor

The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.

cpqFcaMibCondition

The overall condition (status) of the system represented by this MIB.

cpqFcaOsCommonPollFreq

The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management stat ...

cpqFcaOsCommonModuleTable

A table of software modules that provide an interface to the device this MIB describes.

cpqFcaOsCommonModuleEntry

A description of a software module that provides an interface to the device this MIB describes.

cpqFcaOsCommonModuleIndex

A unique index for this module description.

cpqFcaOsCommonModuleName

The module name.

cpqFcaOsCommonModuleVersion

The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.

cpqFcaOsCommonModuleDate

The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 ...

cpqFcaOsCommonModulePurpose

The purpose of the module described in this entry.

cpqFcaCntlrTable

Compaq Fibre Channel Array Controller Table.

cpqFcaCntlrEntry

Compaq Array Controller Entry.

cpqFcaCntlrBoxIndex

Compaq Fibre Channel Array Controller Storage Box Index. The storage box index indicates which storage box this controller is in.

cpqFcaCntlrBoxIoSlot

Compaq Fibre Channel Array Controller Box I/O Slot. This identifies the physical I/O slot where this controller resides in the storage box.

cpqFcaCntlrModel

Compaq Fibre Channel Array Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument agent(s). You have an array controller in the storage box that the instrument agent d ...

cpqFcaCntlrFWRev

Compaq Fibre Channel Array Controller Firmware Revision. This value can be used to help identify a particular revision of the controller.

cpqFcaCntlrStatus

Compaq Fibre Channel Array Controller Status. This value represents the status of the Compaq Fibre Channel Array Controller.

cpqFcaCntlrCondition

Compaq Fibre Channel Array Controller Condition. This value represents the overall condition of this controller and any array accelerators.

cpqFcaCntlrProductRev

Compaq Fibre Channel Array Controller Product Revision. The Product Revision of the controller. This value can be used to further identify a particular revision of the controller model. This will be one character ASCII value that is zero terminated. If ...

cpqFcaCntlrWorldWideName

Compaq Fibre Channel Controller World Wide Name. This value can be used to further identify a particular controller. If the world wide name is not supported, the agent will return a NULL string.

cpqFcaCntlrSerialNumber

Compaq Fibre Channel Controller Serial Number. This value can be used to further identify a particular controller. If the serial number is not supported, the agent will return a NULL string.

cpqFcaCntlrCurrentRole

Compaq Fibre Channel Controller Current Role. For duplexed controllers, this is the controllers current role. The following values are valid: other (1) Indicates that the instrument agent does not recognize the role of the controller. You may need to up ...

cpqFcaCntlrRedundancyType

Compaq Fibre Channel Controller Redundancy Type. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy type of the controller. You may need to upgrade the instrument agent. notRedundant (2) The ar ...

cpqFcaCntlrRedundancyError

Compaq Fibre Channel Controller Redundancy Error. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy error of the controller. You may need to upgrade the instrument agent. noFailure (2) No fail ...

cpqFcaCntlrBlinkTime

External Array Controller Physical Drive Blink Time Count. The controller blink time variable allows the drive tray LEDs of all physical drives attached to this controller to blink. This value indicates the amount of time, in tenths of a second, that the ...

cpqFcaAccelTable

Array Accelerator Board Table.

cpqFcaAccelEntry

Array Accelerator Board Entry.

cpqFcaAccelBoxIndex

Compaq Fibre Channel Array Controller Storage Box Index. The storage box index indicates which storage box this accelerator is in.

cpqFcaAccelBoxIoSlot

Compaq Fibre Channel Array Controller Box I/O Slot. This identifies the physical I/O slot where this accelerator resides in the storage box.

cpqFcaAccelStatus

Array Accelerator Board Status. This describes the status of the Compaq 4MB Array Accelerator Write Cache. The status can be: Other (1) Indicates that the instrument agent does not recognize the status of the Array Accelerator. You may need to upgrade th ...

cpqFcaAccelBadData

Array Accelerator Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when the system was initialized. Possible (3) Indicates that at power up, the battery packs were not ...

cpqFcaAccelErrCode

Array Accelerator Board Error Code. Use this to determine the status of the write cache operations. The status can be: Other (1) Indicates that the instrument agent does not recognize the error code. You may need to update your software. Invalid (2) Indi ...

cpqFcaAccelBatteryStatus

Array Accelerator Board Battery Status. This monitors the status of each battery pack on the board. The batteries can only recharge when the system has power applied. The following values are valid: Other (1) Indicates that the instrument agent does not ...

cpqFcaAccelReadErrs

Array Accelerator Board Read Errors. This shows the total number of read memory parity errors that were detected while reading from the Array Accelerator board. The mirrored copy of data on the board can be accessed to obtain correct data if a memory pari ...

cpqFcaAccelWriteErrs

Array Accelerator Board Write Errors. This shows the total number of write memory parity errors that were detected while writing to the Array Accelerator board. Write parity errors occur when the system detects that information has not been transferred to ...

cpqFcaAccelCondition

The condition of the device. This value represents the overall condition of this array accelerator.

cpqFcaAccelWriteCache

Write Cache Memory. This shows the amount of memory allocated for the write cache in megabytes. Because data is kept in duplicate (mirrored), the actual amount of usable memory is half the amount shown.

cpqFcaAccelReadCache

Read Cache Memory. This shows the amount of memory allocated for the read cache in megabytes.

cpqFcaAccelSerialNumber

Array Accelerator Board Serial Number. This value can be used to further identify the cache controller. If the serial number is not supported, the agent will return a NULL string.

cpqFcaAccelTotalMemory

Array Accelerator Total Memory. This value is the total amount of accelerator memory in megabytes, including both battery-backed and non-battery-backed memory.

cpqFcaLogDrvTable

Fibre Channel Array Logical Drive Table. A table of logical drive entries.

cpqFcaLogDrvEntry

Fibre Channel Array Logical Drive Entry. A logical drive entry.

cpqFcaLogDrvBoxIndex

Compaq Fibre Channel Array Logical Drive Storage Box Index. The storage box index indicates which storage box this logical drive is in.

cpqFcaLogDrvIndex

Fibre Channel Array Logical Drive Index. This logical drive number keeps track of multiple instances of logical drives which are in the same storage box. For each storage box index value, the logical drive index starts at 1 and increments for each logica ...

cpqFcaLogDrvFaultTol

Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. To change the fault tolerance mode, run the Compaq EISA Configuration Utility. The following values are valid for the Logical Drive Fault Tolerance: None (2) Fault to ...

cpqFcaLogDrvStatus

Logical Drive Status. The logical drive can be in one of the following states: Ok (2) Indicates that the logical drive is in normal operation mode. Failed (3) Indicates that more physical drives have failed than the fault tolerance mode of the logical dri ...

cpqFcaLogDrvAutoRel

Compaq Array Controller Logical Drive Auto-Reliability Delay. This value indicates how many seconds the logical drive will wait with no requests before beginning Auto-Reliability monitoring. For example, the default value is five, so the logical drive wil ...

cpqFcaLogDrvPercentRebuild

Logical Drive Percent Rebuild. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value the percent complete of the rebuild. When the value reaches 100, the rebuilding process is complete. The drive arr ...

cpqFcaLogDrvHasAccel

Logical Drive Has Array Accelerator Board. This indicates whether the logical drive has an Array Accelerator board configured and enabled. The following values are valid: Other (1) Indicates that the instrument agent does not recognize the Array Accelera ...

cpqFcaLogDrvAvailSpares

Fibre Channel Array Logical Drive Available Spares. This indicates if this logical drive has one or more spares designated for it that are not currently in use by another drive. Each octet present will be a physical drive ID that is an available spare for ...

cpqFcaLogDrvSize

Fibre Channel Array Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive ca ...

cpqFcaLogDrvPhyDrvIDs

Fibre Channel Array Logical Drive Physical Drive IDs. This lists the physical drive IDs which are associated with this logical drive. These are the same IDs which can be used as indices into the physical drive table. Each byte of the string is an index.

cpqFcaLogDrvCondition

The Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives.

cpqFcaLogDrvStripeSize

Fibre Channel Array Logical Drive Stripe Size. This is the size of a logical drive stripe in kilobytes.

cpqFcaLogDrvOsName

Fibre Channel Array Logical Drive OS Name. The OS name for this array logical drive. This field will be a null (size 0) string if the agent does not support OS name.

cpqFcaLogDrvBlinkTime

External Array Logical Drive Physical Drive Blink Time Count. The logical drive blink time variable allows the drive tray LEDs of all physical drives in a logical drive to blink. This value indicates the amount of time, in tenths of a second, that the ph ...

cpqFcaSpareTable

Fibre Channel Array Spare Table. A table of spare entries.

cpqFcaSpareEntry

Fibre Channel Array Spare Entry. An entry in the spare table.

cpqFcaSpareBoxIndex

Compaq Fibre Channel Array Spare Drive Storage Box Index. The storage box index indicates which storage box this spare drive is in.

cpqFcaSparePhyDrvIndex

Fibre Channel Array Spare Physical Drive Index. This index maps the spare to the physical drive it represents. The value of this index is the same as the one used with the physical drive table.

cpqFcaSpareStatus

Spare Status. This shows the status of the on-line spare drive. The following values are valid for the spare status: Inactive (2) The monitored system has an on-line spare configured, but is not currently in use. Failed (3) The on-line spare has failed an ...

cpqFcaSpareReplacedDrvBay

Spare Replaced Drive Bay. If the spare status is active(6) or building(5), then this has the physical drive bay number of the replaced drive. If the value cannot be determined or is not applicable, the value is set to -1.

cpqFcaSparePercentRebuild

Fibre Channel Array Spare Percent Rebuild. If the spare status is building(5), then this is percent complete of of the rebuild. The data contained on the failed physical drive must be reconstructed from the fault tolerance data and copied to the spare so ...

cpqFcaSpareCondition

The Spare Drive condition. This value represents the overall condition of this spare drive and any associated physical drives.

cpqFcaSpareBusNumber

Spare Drive SCSI Bus Number. The bus number indicates to which SCSI bus this spare drive is attached. The first instance is one and increments for each SCSI bus on a controller.

cpqFcaSpareBay

Fibre Channel Array Spare Drive Bay Location. This value matches the bay location where the physical drive has been installed. Each bay is labeled with a separate number so that you can identify the location of the drive.

cpqFcaSpareReplacedDrvBusNumber

Spare Replaced Drive Bus Number. If the spare status is active(6) or building(5), then this has the physical drive bus number of the replaced drive. If the value cannot be determined or is not applicable, the value is set to -1.

cpqFcaPhyDrvTable

Fibre Channel Array Physical Drive Table. A table of physical drive entries.

cpqFcaPhyDrvEntry

Fibre Channel Array Physical Drive Entry. A physical drive entry.

cpqFcaPhyDrvBoxIndex

Fibre Channel Array Physical Drive Storage Box Index. The storage box index indicates which storage box this physical drive is in.

cpqFcaPhyDrvIndex

Fibre Channel Array Physical Drive Index. This index is used for selecting the physical drive table entry. This number, along with the cpqFcaPhyDrvBoxIndex uniquely identify a specific physical drive.

cpqFcaPhyDrvModel

Fibre Channel Array Physical Drive Model. This is a text description of the physical drive. The text that appears depends upon who manufactured the drive and the drive type. For example, you might see: COMPAQ 210MB CP3201. If a drive fails, note the mode ...

cpqFcaPhyDrvFWRev

Fibre Channel Array Physical Drive Firmware Revision. This shows the physical drive firmware revision number.

cpqFcaPhyDrvBay

Fibre Channel Array Physical Drive Bay Location. This value matches the bay location where the physical drive has been installed. Each bay is labeled with a separate number so that you can identify the location of the drive.

cpqFcaPhyDrvStatus

Fibre Channel Array Physical Drive Status. This shows the status of the physical drive. The following values are valid for the physical drive status: other (1) Indicates that the instrument agent does not recognize the drive. You may need to upgrade your ...

cpqFcaPhyDrvUsedReallocs

Fibre Channel Array Physical Drive Used Reallocated Sectors. This shows the number of sectors of the reallocation area that have been used by the physical drive. To see how many sectors were originally available for use in the reallocation area, refer to ...

cpqFcaPhyDrvRefHours

Fibre Channel Array Reference Time in hours. This shows the total number of hours that a physical drive has been spinning since the drive was stamped. The drive will have either been stamped when it left the factory or when you ran Compaq Diagnostics on ...

cpqFcaPhyDrvHReads

Fibre Channel Array Physical Drive Sectors Read (high). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference time (phyDrvRefHours). The actual number of sectors read equals ...

cpqFcaPhyDrvReads

Fibre Channel Array Physical Drive Sectors Read (low). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference time (phyDrvRefHours). The actual number of sectors read equals t ...

cpqFcaPhyDrvHWrites

Sectors Written (high). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the reference hours (phyDrvRefHours). The actual number of sectors written equals the phyDrvHWrites times 2 ...

cpqFcaPhyDrvWrites

Sectors Written (low). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the reference hours (phyDrvRefHours). The actual number of sectors written equals the phyDrvHWrites times 2^ ...

cpqFcaPhyDrvHSeeks

Total Seeks (high). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the reference hours (phyDrvRefHours). The actual number of seeks equals the phyDrvHSeeks times 2^32 plu ...

cpqFcaPhyDrvSeeks

Total Seeks (low). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the reference hours (phyDrvRefHours). The actual number of seeks equals the phyDrvHSeeks times 2^32 plus ...

cpqFcaPhyDrvHardReadErrs

Hard Read Errors. This shows the number of read errors that have occurred on a drive that could not be recovered by a physical drive's Error Correction Code (ECC) algorithm or through retries during the reference time (phyDrvRefTime). Over time, a disk d ...

cpqFcaPhyDrvRecvReadErrs

Recovered Read Errors. This shows the number of read errors corrected through physical drive retries during the reference time (phyDrvRefTime). Over time, all disk drives produce these errors. If you notice a rapid increase in the value for Recovered Rea ...

cpqFcaPhyDrvHardWriteErrs

Hard Write Errors. This shows the number of write errors that could not be recovered by a physical drive during the reference time (phyDrvRefTime). Over time a disk drive may detect these errors. If you notice an increase in the value shown for Hard Write ...

cpqFcaPhyDrvRecvWriteErrs

Recovered Write Errors. This shows the number of write errors corrected through physical drive retries or recovered by a physical drive during the reference time (phyDrvRefTime). Over time a disk drive may produce these errors. If you notice an increase i ...

cpqFcaPhyDrvHSeekErrs

Seek Errors (High). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error during the reference hours (phyDrvRefHours). The actual number of seek errors equals the phyDrvHSeek ...

cpqFcaPhyDrvSeekErrs

Seek Errors (low). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error during the reference hours (phyDrvRefHours). The actual number of seek errors equals the phyDrvHSeekE ...

cpqFcaPhyDrvSpinupTime

Spin up Time in tenths of seconds. This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach operating speed. As cars are tested to go from 0 mph to 60 mph in x number of seconds, drive manufact ...

cpqFcaPhyDrvFunctTest1

Functional Test 1. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new. A p ...

cpqFcaPhyDrvFunctTest2

Functional Test 2. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new. A p ...

cpqFcaPhyDrvFunctTest3

Functional Test 3. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new. A p ...

cpqFcaPhyDrvOtherTimeouts

Other Timeouts. The number of times that a physical drive did not respond with an interrupt within a controller-defined period of time after a command had been issued during the reference time (phyDrvRefTime). This does not include DRQ timeouts. If you su ...

cpqFcaPhyDrvBadRecvReads

Recovery Failed (Bad) Read Error. The number of times a read error occurred while performing Automatic Data Recovery from this physical drive to another drive during the reference time (phyDrvRefTime). If a read error occurs, Automatic Data Recovery stops ...

cpqFcaPhyDrvBadRecvWrites

Recovery Failed (Bad) Write Error. The number of times a write error occurred while performing Automatic Data Recovery from another drive to this physical drive during the reference time (phyDrvRefTime). If a write error occurs, Automatic Data Recovery st ...

cpqFcaPhyDrvFormatErrs

Format Error. The number of times a format operation failed when the controller attempted to remap a bad sector during the reference time (phyDrvRefTime). Zero indicates that no format errors have occurred. The value increases each time a format error o ...

cpqFcaPhyDrvNotReadyErrs

Drive Not Ready Errors. The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the spin up command was issued, the drive failed to reach its ready state. If the current value is ...

cpqFcaPhyDrvHasMonInfo

Physical Drive Has Monitor Information. All of the physical disk table fields except for the physical disk status (phyDrvStatus) and the bay location (phyDrvBayLocation) are invalid unless this field has a value of true(2). If the value is false(1), you m ...

cpqFcaPhyDrvCondition

The condition of the device. This value represents the overall condition of this physical drive.

cpqFcaPhyDrvHotPlugs

Physical Drive Hot Plug Count. This value indicates the number of times this physical drive was hot-plugged (removed) from a Compaq ProLiant Storage System. This is not supported by the IDA, IDA Expansion, or IDA-2 controllers. If the value cannot be dete ...

cpqFcaPhyDrvMediaErrs

Physical Drive Media Failure Count. This value indicates the number of times this physical drive was failed due to unrecoverable media errors. If the value cannot be determined, 4,294,967,295 is returned.

cpqFcaPhyDrvHardwareErrs

Physical Drive Hardware Error Count. This value indicates the number of times this physical drive returned a bad hardware status. The drive may be failed if retries do not work. If the value cannot be determined, 4,294,967,295 is returned.

cpqFcaPhyDrvAbortedCmds

Physical Drive Aborted Command Failures. This value indicates the number of times this physical drive was failed due to aborted commands that could not be retried successfully. If the value cannot be determined, 4,294,967,295 is returned.

cpqFcaPhyDrvSpinUpErrs

Physical Drive Spin-Up Failure Count. This value indicates the number of times this physical drive was failed due to a failure of a spin-up command. If the value cannot be determined, 4,294,967,295 is returned.

cpqFcaPhyDrvBadTargetErrs

Physical Drive Bad Target Count. This value indicates the number of times this physical drive performed some action that did not conform to the SCSI-2 bus protocol. These actions will cause the SCSI bus to be reset. If the value cannot be determined, 4,2 ...

cpqFcaPhyDrvSize

Physical Drive Size in MB. This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so ...

cpqFcaPhyDrvBusFaults

Physical Drive Bus Fault Count. This value indicates the number of times that a bus fault was detected for the drive by the controller. If the value cannot be determined, 4,294,967,295 is returned.

cpqFcaPhyDrvHotPlug

Physical Drive Hot Plug Support Status. The following values are defined: other(1) The Insight Agent is unable to determine if this drive supports hot plug replacement. hotPlug(2) The drive supports hot plug replacement. nonhotPlug(3) The drive does not s ...

cpqFcaPhyDrvPlacement

Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassis. internal(2) The drive is located in the system chassis. external(3) The drive is located outs ...

cpqFcaPhyDrvBusNumber

Physical Drive SCSI Bus Number. The bus number indicates to which SCSI bus this physical drive is attached. The first instance is one and increments for each SCSI bus on a controller.

cpqFcaPhyDrvSerialNum

Physical Drive Serial Number. This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inquiry command but may have been modified due to space limitations. This can be used for identific ...

cpqFcaPhyDrvPreFailMonitoring

Compaq Drive Array Physical Drive Predictive Failure Monitoring. The following values are defined: other(1) The agent is unable to determine if the drive supports predictive failure monitoring. notAvailable(2) This drive does not support predictive failur ...

cpqFcaPhyDrvCurrentWidth

Physical Drive Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for this drive. narrow(2) The negotiated data transfer width for this drive is narrow (8 data bits). wide1 ...

cpqFcaPhyDrvCurrentSpeed

Physical Drive Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer speed for this drive. asynchronous(2) The negotiated data transfer speed for this drive is asynchr ...

cpqFcaPhyDrvFailureCode

Physical Drive Failure Code. This value is the drive failure reason code returned by the array firmware. It is valid only when the drive is failed. If the drive is not failed, 0 is returned.

cpqFcaPhyDrvBlinkTime

Physical Drive LED Blink Time. This value is the amount of time remaining for the drive LEDs to blink in tenths of seconds. A value of zero means the drive LEDs are not blinking. If the value cannot be determined or the drive is not in a hot plug tray, ...

cpqFcaPhyDrvSmartStatus

Physical Drive S.M.A.R.T Status. The following values are defined: other(1) The agent is unable to determine if the status of S.M.A.R.T predictive failure monitoring for this drive. ok(2) Indicates the drive is functioning properly. replaceDrive(3) Indica ...

cpqFcaPhyDrvThrTable

Drive Array Physical Drive Threshold Table. A table of physical drive threshold entries.

cpqFcaPhyDrvThrEntry

Drive Array Physical Drive Threshold Entry. A physical drive threshold entry.

cpqFcaPhyDrvThrBoxIndex

Fibre Channel Array Physical Drive Threshold Storage Box Index. The storage box index indicates which storage box this physical drive is in.

cpqFcaPhyDrvThrIndex

Drive Array Physical Drive Threshold Index. This index maps the thresholds to a physical drive. The value of this index is the same as the one used with the physical drive table.

cpqFcaPhyDrvThrUsedReallocs

Used Reallocated Sectors Maximum Threshold. This shows the maximum threshold of the reallocation area that has been used by the physical drive. This threshold is associated with the cpqFcaPhyDrvUsedReallocs object in the Physical Drive Table. If the value ...

cpqFcaPhyDrvThrSpinupTime

Spin up Time Maximum Threshold in tenths of seconds. This shows the maximum of time it takes for a physical drive to spin up to full speed. This threshold is associated with the cpqFcaPhyDrvSpinupTime object in the Physical Drive Table. If the value canno ...

cpqFcaPhyDrvThrFunctTest1

Functional Test 1 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operate when performing various tasks ...

cpqFcaPhyDrvThrFunctTest2

Functional Test 2 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks ...

cpqFcaPhyDrvThrFunctTest3

Functional Test 3 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks ...

cpqFcaPhyDrvThrViUsedReallocs

Used Reallocated Sectors Threshold Has Been Violated. This is used to indicate whether the number of used sectors of the reallocation area for a physical drive has ever exceeded the maximum allowable threshold. The valid values are: false (1) Indicates th ...

cpqFcaPhyDrvThrViSpinupTime

Spin up Time in tenths of seconds Threshold Has Been Violated. This is used to indicate whether the time it took for a physical drive to spin up to full speed has ever exceeded the maximum allowable threshold. The valid values are: false (1) Indicates tha ...

cpqFcaPhyDrvThrViFunctTest1

Functional Test 1 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 1 has every dropped below the allowable threshold for that test. The valid values are: false (1) Indicates that the Function ...

cpqFcaPhyDrvThrViFunctTest2

Functional Test 2 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 2 has every dropped below the allowable threshold for that test. The valid values are: false (1) Indicates that the Function ...

cpqFcaPhyDrvThrViFunctTest3

Functional Test 3 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 3 has every dropped below the allowable threshold for that test. The valid values are: false (1) Indicates that the Function ...

cpqFcaHostCntlrTable

Compaq Fibre Channel Host Controller Table.

cpqFcaHostCntlrEntry

Compaq Array Controller Entry.

cpqFcaHostCntlrIndex

Compaq Fibre Channel Host Controller Index. This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number associated with it.

cpqFcaHostCntlrSlot

Compaq Fibre Channel Host Controller Slot. This identifies the physical slot where the Compaq Fibre Channel Host Controller resides in the system. For example, if this value is three, the controller is located in slot three of your computer. If the slot ...

cpqFcaHostCntlrModel

Compaq Fibre Channel Host Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument agent(s). You have a drive array controller in the system that the instrument agent d ...

cpqFcaHostCntlrStatus

Compaq Fibre Channel Host Controller Status. The host controller can be in one of the following states: Other (1) The agent is unable to determine the status of the host controller. Ok (2) Indicates that the host controller is in normal operation mode. Fa ...

cpqFcaHostCntlrCondition

Compaq Fibre Channel Host Controller Condition. This value represents the condition of this controller.

cpqFcaHostCntlrWorldWideName

Compaq Fibre Channel Host Controller World Wide Name. This value can be used to further identify a particular controller. If the world wide name is not supported, the agent will return a NULL string.

cpqFcaHostCntlrStorBoxList

Compaq Fibre Channel Host Controller Storage Box List. This lists the storage boxes which are associated with this host controller. These are the same IDs which can be used as indices into the storage box table. Each 2 bytes of the string is an index.

cpqFcaHostCntlrOverallCondition

Compaq Fibre Channel Host Controller Overall Condition. This value represents the overall condition of this controller, and any associated storage boxes.

cpqFcaHostCntlrTapeCntlrList

Compaq Fibre Channel Host Controller Tape Controller List. This lists the tape controllers which are associated with this host controller. These are the same IDs which can be used as indices into the tape controller table. Each 2 bytes of the string is an ...

cpqFcaHostCntlrSerialNumber

Compaq Fibre Channel Host Controller Serial Number. This value can be used to further identify a particular controller. If the serial number is not supported, the agent will return a NULL string.

cpqFcaHostCntlrHwLocation

A text description of the hardware location, on complex multi SBB hardware only, for the controller. A NULL string indicates that the hardware location could not be determined or is irrelevant.

cpqFcTapeCntlrTable

Compaq Fibre Channel Tape Controller Table.

cpqFcTapeCntlrEntry

Compaq Fibre Channel Tape Controller Entry.

cpqFcTapeCntlrIndex

Compaq Fibre Channel Tape Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller number associated with it.

cpqFcTapeCntlrStatus

Compaq Fibre Channel Tape Controller Status. The following values are defined: other(1) The agent is unable to determine the status of the tape controller. ok(2) The tape controller is OK. offline(3) The tape controller is offline. The tape controller ma ...

cpqFcTapeCntlrCondition

Compaq Fibre Channel Tape Controller Condition. This value represents the condition of the tape controller.

cpqFcTapeCntlrOverallCondition

Compaq Fibre Channel Tape Controller Index. This value represents the overall condition of the tape controller and any associated tape libraries.

cpqFcTapeCntlrWWN

Compaq Fibre Channel Tape Controller World Wide Name. This value can be used to further identify a particular tape controller. If the world wide name is not supported, the agent will return a NULL string.

cpqFcTapeCntlrFWRev

Compaq Fibre Channel Tape Controller Firmware Revision. This shows the tape controller firmware revision number. If the world wide name is not supported, the agent will return a NULL string.

cpqFcTapeCntlrType

Compaq Fibre Channel Tape Controller Type. The following values are defined: other(1) The agent is unable to determine if the type of the tape controller. fiberTape(2) The original Fibre Channel Tape Controller. modularDataRouter(3) The Compaq Modular Dat ...

cpqFcTapeLibraryTable

Compaq Fibre Channel Tape Library Table.

cpqFcTapeLibraryEntry

Compaq Fibre Channel Tape Library Entry.

cpqFcTapeLibraryCntlrIndex

Compaq Fibre Channel Tape Library Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller number associated with it.

cpqFcTapeLibraryScsiBus

Compaq Fibre Channel Tape Library Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs.

cpqFcTapeLibraryScsiTarget

Compaq Fibre Channel Tape Library Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeLibraryScsiLun

Compaq Fibre Channel Tape Library Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeLibrarySerialNumber

Compaq Fibre Channel Tape Library Serial Number. This is the unit serial number for the tape library. It can be used for identification purposes.

cpqFcTapeLibraryModel

Compaq Fibre Channel Tape Library Model. This is the model name of the tape library. It can be used for identification purposes.

cpqFcTapeLibraryFWRev

Compaq Fibre Channel Tape Library Serial Number. This is firmware revision level of the tape library. It can be used for identification purposes.

cpqFcTapeLibraryStatus

Compaq Fibre Channel Tape Library Status. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indicates that the library is in normal operation mode. No user action is necessary ...

cpqFcTapeLibraryDoorStatus

Compaq Fibre Channel Tape Library Door Status. The door can be in one of the following states: other(1) The door is in a state other than one of those listed below. notSupported(2) The door status is not supported by the device. closed(3) The door is clos ...

cpqFcTapeLibraryCondition

Compaq Fibre Channel Tape Library Condition. This value represents the overall condition of the tape library.

cpqFcTapeLibraryOverallCondition

Compaq Fibre Channel Tape Library Overall Condition. This value represents the overall condition of the tape library and any associated tape drives.

cpqFcTapeLibraryLastError

Compaq Fibre Channel Tape Library Last Error. This is the last error returned by the tape library.

cpqFcTapeLibraryStatHours

Compaq Fibre Channel Tape Library Stat Hours. This is the number of hours of operation for the library.

cpqFcTapeLibraryStatMoves

Compaq Fibre Channel Tape Library Stat Moves. This is the number of tape moves for the library loader arm.

cpqFcTapeLibraryDriveList

Compaq Fibre Channel Tape Library Tape Drive List. This is a data structure containing the list of tape drive ids that are present in this library. The format is: field octets contents ===== ====== ======== 1 1-2 Tape controller index 2 3 ...

cpqFcTapeDriveTable

Compaq Fibre Channel Tape Drive Table.

cpqFcTapeDriveEntry

Compaq Fibre Channel Tape Drive Entry.

cpqFcTapeDriveCntlrIndex

Compaq External Tape Drive Controller Index. This value is a logical number whose meaning is OS dependent. For tape controller has one unique controller number associated with it.

cpqFcTapeDriveScsiBus

Compaq External Tape Drive Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs.

cpqFcTapeDriveScsiTarget

Compaq External Tape Drive Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeDriveScsiLun

Compaq External Tape Drive Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeDriveSerialNumber

Compaq External Tape Drive Serial Number. This is the unit serial number for the tape drive. It can be used for identification purposes.

cpqFcTapeDriveModel

Compaq External Tape Drive Model. This is the model name of the tape drive. It can be used for identification purposes.

cpqFcTapeDriveFWRev

Compaq External Tape Drive Firmware Revision. This is firmware revision level of the tape drive. It can be used for identification purposes.

cpqFcTapeDriveType

Compaq External Tape Drive Type. This is the drive type. It can be used for identification purposes. The following values are defined: other(1) The management agent does not recognize this model. You may need to upgrade your software. cpqDlt35-70( ...

cpqFcTapeDriveFWSubtype

Compaq External Tape Drive Firmware Subtype. This is used to differentiate the firmware versions which have the same tape drive type (as specified by cpqFcTapeDriveType). Tape drives will contain a value of 1 for this variable when they first ship, and t ...

cpqFcTapeDriveStatus

Compaq External Tape Drive Status. The tape drive can be in one of the following states: other(1) The tape drive is in a state other than one of those listed below. ok(2) Indicates that the tape drive is in normal operation mode. No user action is necessa ...

cpqFcTapeDriveCleanReq

Compaq External Tape Drive Cleaning Required. This is an indication of whether the tape drive heads require a cleaning session to occur. If this variable indicates a need to clean the tape heads, then a cleaning tape will need to be inserted and run thro ...

cpqFcTapeDriveCleanTapeRepl

Compaq External Tape Drive Cleaning Tape Replacement. This variable is only applicable to autoloader tape drives. This variable indicates whether the cleaning tape which is inserted in an autoloader needs to be replaced because its cleaning capability is ...

cpqFcTapeDriveCondition

Compaq External Tape Drive Condition. This value represents the overall condition of the tape drive.

cpqFcTapeDriveCleanTapeCount

Compaq External Tape Drive Cleaning Tape Count. This variable is a count from a tape drive of the number of cleanings done by the tape cleaner last in the drive.

cpqFcTapeDriveLibraryDrive

Compaq External Tape Drive Library Drive. This variable indicates whether or not the tape drive is part of a tape library. It can be in one of the following states: other(1) Indicates that the storage agent cannot determine if the tape drive is part of a ...

cpqFcTapeDriveLocation

Compaq External Tape Drive Location. This is the location of the tape drive.

cpqFcTapeDriveHotPlug

Compaq External Tape Drive Hot Plug Support Status. The following values are defined: other(1) The agent is unable to determine if this drive supports hot plug replacement. hotPlug(2) The drive supports hot plug replacement. nonhotPlug(3) The drive does n ...

cpqFcTapeCountersTable

Compaq Fibre Channel Tape Counters Table.

cpqFcTapeCountersEntry

Compaq Fibre Channel Tape Counters Entry.

cpqFcTapeCountersCntlrIndex

Compaq Fibre Channel Tape Counters Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller number associated with it.

cpqFcTapeCountersScsiBus

Compaq Fibre Channel Tape Counters Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs.

cpqFcTapeCountersScsiTarget

Compaq Fibre Channel Tape Counters Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeCountersScsiLun

Compaq Fibre Channel Tape Counters Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs.

cpqFcTapeCountersReWrites

Compaq Tape Device Re-write count. This is the number of times blocks had to be re-written to the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-write errors may occasionally occur. If this value should rise dra ...

cpqFcTapeCountersReReads

Compaq Tape Device Re-read count. This is the number of times blocks had to be re-read from the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-read errors may occasionally occur. If this value should rise dramat ...

cpqFcTapeCountersTotalErrors

Compaq Tape Device Total Errors. This is the total number of read/write errors encountered. This value is maintained since the Tape Hardware Interface driver was loaded. Errors may occasionally occur. If this value should rise dramatically, you may need ...

cpqFcTapeCountersTotalUncorrectable

Compaq Tape Device Total Uncorrectable Errors. This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape Hardware Interface driver was loaded. Errors may occasionally occur. If this value sho ...

cpqFcTapeCountersTotalBytes

Compaq Tape Device Total Bytes. This is the number total number of bytes read/written to the tape currently installed in the device. This value is reset whenever a new tape is inserted into the device.

cpqFcSwitchTable

Compaq Fibre Channel Switch Table.

cpqFcSwitchEntry

Compaq Fibre Channel Switch Entry.

cpqFcSwitchIndex

Compaq Fibre Channel Switch Index. This value is a logical number whose meaning is OS dependent. Each switch has one unique controller number associated with it.

cpqFcSwitchLocation

Compaq Fibre Channel Switch Location. The following values are defined: other(1) The agent is unable to determine if the switch is internal or external to the storage system chassis. internal(2) The switch is located in the storage system chassis. externa ...

cpqFcSwitchChassisIndex

Compaq Fibre Channel Switch Chassis Index. The chassis index indicates the storage system in which this switch resides. If the switch does not reside in a storage system chassis, then this field is invalid and a value of 65535 will be returned.

cpqFcSwitchChassisSlot

Compaq Fibre Channel Switch Chassis Slot. The chassis slot identifies the physical slot of the storage system in which this switch resides. If the switch does not reside in a storage system chassis, then this field is invalid and a value of 255 will be r ...

cpqFcSwitchWorldWideNodeName

Compaq Fibre Channel Switch World Wide Node Name. This value can be used to further identify a particular controller. If the world wide node name is not supported, the agent will return a NULL string.

cpqFcSwitchWorldWidePortName

Compaq Fibre Channel Switch World Wide Port Name. This value can be used to further identify a particular controller. If the world wide port name is not supported, the agent will return a NULL string.

cpqFcSwitchIpAddress

Compaq Fibre Channel Switch IP Address. This is the IP address of the switch. If the IP address is not supported, the agent will return a NULL string.

cpqFcSwitchIpGateway

Compaq Fibre Channel Switch IP Gateway. This is the IP gateway of the switch. If the IP gateway is not supported, the agent will return a NULL string.

cpqFcSwitchIpSubnet

Compaq Fibre Channel Switch IP Subnet. This is the IP subnet of the switch. If the IP subnet is not supported, the agent will return a NULL string.

cpqFcSwitchName

Compaq Fibre Channel Switch Name. This is the name of the switch. If the name is not supported, the agent will return a NULL string.

cpqFcSwitchNetworkLinkStatus

Compaq Fibre Channel Switch Network Link Status. The following values are defined: other(1) The agent is unable to determine the status of the switch network link. active(2) The switch network link is active. notActive(3) The switch network link is not ac ...

cpqFcSwitchFibreConnectStatus

Compaq Fibre Channel Switch Fibre Channel Connection Status. The following values are defined: other(1) The agent is unable to determine the status of the switch fibre channel connection. ok(2) The switch Fibre Channel connection is OK. offline(3) The swi ...