CPQTHRSH Download

cpqMeMibRevMajor

The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of ...

cpqMeMibRevMinor

The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.

cpqMeMibCondition

The overall condition. This object represents the overal status of the Compaq threshold management system represented by this MIB.

cpqMeOsCommonPollFreq

The Insight Agent's minimum polling frequency. The minimum frequency, in seconds, at which the Insight Agent will permit the cpqMeAlarmInterval to be SET (for an entry in the cpqMeAlarm table). Changing this variable to smaller values will allow a manage ...

cpqMeOsCommonModuleTable

A table of software modules that provide an interface to the device this MIB describes.

cpqMeOsCommonModuleEntry

A description of a software modules that provide an interface to the device this MIB describes.

cpqMeOsCommonModuleIndex

A unique index for this module description.

cpqMeOsCommonModuleName

The module name.

cpqMeOsCommonModuleVersion

The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.

cpqMeOsCommonModuleDate

The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 ...

cpqMeOsCommonModulePurpose

The purpose of the module described in this entry.

cpqMeAlarmNextIndex

The index of the next available entry in the cpqMeAlarm table. If the maximum number of entries to the cpqMeAlarm table has been reached, this index will contain -1.

cpqMeAlarmTable

A list of alarm entries.

cpqMeAlarmEntry

A list of parameters that set up a periodic checking for alarm conditions.

cpqMeAlarmIndex

An index that uniquely identifies an entry in the cpqMeAlarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.

cpqMeAlarmInterval

The interval, in seconds, between consecutive samples of the data. When setting this variable, care should be given to ensure that the variable being monitored will not exceed 2^31 - 1 and roll over. The first sample will be taken immediately upon the cp ...

cpqMeAlarmVariable

The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the ...

cpqMeAlarmSampleType

The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the sample type (cpqMeAlarmSampleType) is absoluteValue(1), the most recent sampled value of the selected variable (cpqMeAlarmVariable) will b ...

cpqMeAlarmValue

The value of the object identifier (cpqMeAlarmVariable) during the last sampling period. The value during the current sampling period is not made available until the period is completed. If the sample type (cpqMeAlarmSampleType) is absoluteValue(1), absS ...

cpqMeAlarmStartupAlarm

The alarm that may be sent when this entry is first set to valid. If the sample type (cpqMeAlarmSampleType) is absoluteValue(1), then the following comparisons are used to generate an event. If cpqMeAlarmStartupAlarm is equal to risingAlarm(1) or risingOr ...

cpqMeAlarmRisingThreshold

A threshold for the sampled object identifier (cpqMeAlarmVariable). If the sample type (cpqMeAlarmSampleType) is absoluteValue(1), then the following describes the comparison. When the current sampled value is greater than or equal to this threshold, and ...

cpqMeAlarmFallingThreshold

A threshold for the sampled object identifier (cpqMeAlarmVariable). If the sample type (cpqMeAlarmSampleType) is absoluteValue(1), then the following describes the comparison. When the current sampled value is less than or equal to this threshold, and th ...

cpqMeAlarmPermanence

This specifies if the threshold management software should recreate this entry if it is brought down and then restarted. A temporary entry will not be recreated after a restart. A permanent entry will be recreated after a restart and requires an explici ...

cpqMeAlarmOwner

The entity that configured this entry and is therefore using the resources assigned to it. This string is used to model an administratively assigned name of the owner of a resource. This information is taken from the NVT ASCII character set. It is suggest ...

cpqMeAlarmStatus

The status of this alarm entry. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to ...

cpqMeAlarmSeverity

This is used to correlate the severity of a particular alarm entry. The management console can use this to relate the severity of an alarm entry to the end user.

cpqMeAlarmExtendedDescription

This string contains meaningful information about the MIB variable which has the threshold set upon it. This information will be bound to a trap and is intended to allow a management console to have specific customized information about the MIB variable ...