DLSW-MIB Download

dlswNodeVersion

This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard Version number of this DLSw, and the second is a hexadecimal value representing the DLSw stand ...

dlswNodeVendorID

The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.

dlswNodeVersionString

This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages.

dlswNodeStdPacingSupport

Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) mean ...

dlswNodeStatus

The status of the DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions - (1) it disconnects all circuits through all DLSw partners, (2) it disconnects all transport connections to all DLSw partners ...

dlswNodeUpTime

The amount of time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the time the dlswState entered the active state. It will remain zero if dlswState is in the inactive ...

dlswNodeVirtualSegmentLFSize

The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This object can represent any box- level frame size forwarding restriction (e.g., from the use of fixed ...

dlswNodeResourceNBExclusivity

The value of true indicates that the NetBIOS Names configured in dlswDirNBTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to th ...

dlswNodeResourceMacExclusivity

The value of true indicates that the MAC addresses configured in the dlswDirMacTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up ...

dlswTConnStatActiveConnections

The number of transport connections that are not in `disconnected' state.

dlswTConnStatCloseIdles

The number of times transport connections in this node exited the connected state with zero active circuits on the transport connection.

dlswTConnStatCloseBusys

The number of times transport connections in this node exited the connected state with some non-zero number of active circuits on the transport connection. Normally this means the transport connection failed unexpectedly.

dlswTConnConfigTable

This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of transport connections by a conceptual row. For a specific transport connection, there may be ...

dlswTConnConfigEntry

Each conceptual row defines a collection of transport connections.

dlswTConnConfigIndex

The index to the conceptual row of the table. Negative numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigne ...

dlswTConnConfigTDomain

The object identifier which indicates the transport domain of this conceptual row.

dlswTConnConfigLocalTAddr

The local transport address for this conceptual row of the transport connection definition.

dlswTConnConfigRemoteTAddr

The remote transport address. Together with dlswTConnConfigEntryType and dlswTConnConfigGroupDefinition, the object instance of this conceptual row identifies a collection of the transport connections that will be either initiated by this DLSw or initiat ...

dlswTConnConfigLastModifyTime

The time (in hundredths of a second) since the value of any object in this conceptual row except for dlswTConnConfigOpens was last changed. This value may be compared to dlswTConnOperConnectTime to determine whether values in this row are completely vali ...

dlswTConnConfigEntryType

The object instance signifies the type of entry in the associated conceptual row. The value of `individual' means that the entry applies to a specific partner DLSw node as identified by dlswTConnConfigRemoteTAddr and dlswTConnConfigTDomain. The value of ...

dlswTConnConfigGroupDefinition

For conceptual rows of `individual' and `global' as specified in dlswTConnConfigEntryType, the instance of this object is `0.0'. For conceptual rows of `group', the instance points to the specific group definition.

dlswTConnConfigSetupType

This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value of activePersistent, activeOnDemand and passive means this DLSw will accept any transport connec ...

dlswTConnConfigSapList

The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most sig ...

dlswTConnConfigAdvertiseMacNB

The value of true indicates that any defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time capabilities exchange messages. The DLSw node should send the appropriate exclusivity control ...

dlswTConnConfigInitCirRecvWndw

The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing window in its initial capabilities ex ...

dlswTConnConfigOpens

Number of times transport connections entered connected state according to the definition of this conceptual row.

dlswTConnConfigRowStatus

This object is used by the manager to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row definition out of use.

dlswTConnOperTable

A list of transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connection, ...

dlswTConnOperEntry

dlswTConnOperTDomain

The object identifier indicates the transport domain of this transport connection.

dlswTConnOperLocalTAddr

The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed after this transport connection was established.

dlswTConnOperRemoteTAddr

The remote transport address of this transport connection.

dlswTConnOperEntryTime

The amount of time (in hundredths of a second) since this transport connection conceptual row was created.

dlswTConnOperConnectTime

The amount of time (in hundredths of a second) since this transport connection last entered the 'connected' state. A value of zero means this transport connection has never been established.

dlswTConnOperState

The state of this transport connection. The transport connection enters `connecting' state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connection enters enters `initCapExchange' ...

dlswTConnOperConfigIndex

The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. The manager can therefore normally examine both configured and operational information for this transport connection ...

dlswTConnOperFlowCntlMode

The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new transport connection (i.e., after CapEx is sent but before Capex or other SSP control messages have ...

dlswTConnOperPartnerVersion

This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero le ...

dlswTConnOperPartnerVendorID

This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned ...

dlswTConnOperPartnerVersionStr

This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message recei ...

dlswTConnOperPartnerInitPacingWndw

The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This informa ...

dlswTConnOperPartnerSapList

The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList. A string of zero length is returned before a Capabilities Exchange message is received, or if ...

dlswTConnOperPartnerNBExcl

The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. `False' indicates that other NetBIOS names may be reachable. ...

dlswTConnOperPartnerMacExcl

The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC addresses reachable by that partner. `False' indicates that other MAC addresses may be reachable. ...

dlswTConnOperPartnerNBInfo

It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are ...

dlswTConnOperPartnerMacInfo

It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are s ...

dlswTConnOperDiscTime

The amount of time (in hundredths of a second) since the dlswTConnOperState last entered `disconnected' state.

dlswTConnOperDiscReason

This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter the disconnected state.

dlswTConnOperDiscActiveCir

The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected.

dlswTConnOperInDataPkts

The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection.

dlswTConnOperOutDataPkts

The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection.

dlswTConnOperInDataOctets

The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header.

dlswTConnOperOutDataOctets

The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message is counted starting with the first octet following the SSP message header.

dlswTConnOperInCntlPkts

The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.

dlswTConnOperOutCntlPkts

The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.

dlswTConnOperCURexSents

The number of CanUReach_ex messages sent on this transport connection.

dlswTConnOperICRexRcvds

The number of ICanReach_ex messages received on this transport connection.

dlswTConnOperCURexRcvds

The number of CanUReach_ex messages received on this transport connection.

dlswTConnOperICRexSents

The number of ICanReach_ex messages sent on this transport connection.

dlswTConnOperNQexSents

The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection.

dlswTConnOperNRexRcvds

The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection.

dlswTConnOperNQexRcvds

The number of NETBIOS_NQ_ex messages received on this transport connection.

dlswTConnOperNRexSents

The number of NETBIOS_NR_ex messages sent on this transport connection.

dlswTConnOperCirCreates

The number of times that circuits entered `circuit_established' state (not counting transitions from `circuit_restart').

dlswTConnOperCircuits

The number of currently active circuits on this transport connection, where `active' means not in `disconnected' state.

dlswTConnTcpConfigTable

This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain.

dlswTConnTcpConfigEntry

Each conceptual row defines parameters that are specific to dlswTCPDomain transport connections.

dlswTConnTcpConfigKeepAliveInt

The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol. Changes take effect only for new TCP connections.

dlswTConnTcpConfigTcpConnections

This is our preferred number of TCP connections within a TCP transport connection. The actual number used is negotiated at capabilities exchange time. Changes take effect only for new transport connections.

dlswTConnTcpConfigMaxSegmentSize

This is the number of bytes that this node is willing to receive over the read TCP connection(s). Changes take effect for new transport connections.

dlswTConnTcpOperTable

A list of TCP transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connecti ...

dlswTConnTcpOperEntry

dlswTConnTcpOperKeepAliveInt

The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol is operating.

dlswTConnTcpOperPrefTcpConnections

This is the number of TCP connections preferred by this DLSw partner, as received in its capabilities exchange message.

dlswTConnTcpOperTcpConnections

This is the actual current number of TCP connections within this transport connection.

dlswIfTable

The list of interfaces on which DLSw is active.

dlswIfEntry

dlswIfRowStatus

This object is used by the manager to create or delete the row entry in the dlswIfTable following the RowStatus textual convention.

dlswIfVirtualSegment

The segment number that uniquely identifies the virtual segment to which this DLSw interface is connected. Current source routing protocols limit this value to the range 0 - 4095. (The value 0 is used by some management applications for special test cases ...

dlswIfSapList

The SAP list indicates which SAPs are allowed to be data link switched through this interface. This list has the same format described for dlswTConnConfigSapList. When changes to this object take effect is implementation- specific. Turning off a particu ...

dlswDirMacEntries

The current total number of entries in the dlswDirMacTable.

dlswDirMacCacheHits

The number of times a cache search for a particular MAC address resulted in success.

dlswDirMacCacheMisses

The number of times a cache search for a particular MAC address resulted in failure.

dlswDirMacCacheNextIndex

The next value of dlswDirMacIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirMacTable. This makes it possible for the agent to control the index space o ...

dlswDirNBEntries

The current total number of entries in the dlswDirNBTable.

dlswDirNBCacheHits

The number of times a cache search for a particular NetBIOS name resulted in success.

dlswDirNBCacheMisses

The number of times a cache search for a particular NetBIOS name resulted in failure.

dlswDirNBCacheNextIndex

The next value of dlswDirNBIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirNBTable. This makes it possible for the agent to control the index space for ...

dlswDirMacTable

This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches.

dlswDirMacEntry

Indexed by dlswDirMacIndex.

dlswDirMacIndex

Uniquely identifies a conceptual row of this table.

dlswDirMacMac

The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.

dlswDirMacMask

The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.

dlswDirMacEntryType

The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line or equivalent methods; (2) learned from the partner DLSw Capabi ...

dlswDirMacLocationType

The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a partner DLSw node (or a set of partner DLSw n ...

dlswDirMacLocation

Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MAC address (or the collection of MAC addresses.)

dlswDirMacStatus

This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a ...

dlswDirMacLFSize

The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path.

dlswDirMacRowStatus

This object is used by the manager to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention.

dlswDirNBTable

This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches.

dlswDirNBEntry

Indexed by dlswDirNBIndex.

dlswDirNBIndex

Uniquely identifies a conceptual row of this table.

dlswDirNBName

The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partner DLSw nodes.

dlswDirNBNameType

Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s).

dlswDirNBEntryType

The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line, or equivalent methods; (2) learned from the partner DLSw Capab ...

dlswDirNBLocationType

The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a a partner DLSw node (or ...

dlswDirNBLocation

Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the NetBIOS name or the set of NetBIOS names.

dlswDirNBStatus

This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a ...

dlswDirNBLFSize

The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path.

dlswDirNBRowStatus

This object is used by manager to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention.

dlswDirLocateMacTable

This table is used to retrieve all entries in the dlswDirMacTable that match a given MAC address, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given MAC address.

dlswDirLocateMacEntry

Indexed by dlswDirLocateMacMac and dlswDirLocateMacMatch. The first object is the MAC address of interest, and the second object is the order in the list of all entries that match the MAC address.

dlswDirLocateMacMac

The MAC address to be located.

dlswDirLocateMacMatch

The order of the entries of dlswDirMacTable that match dlswDirLocateMacMac. A value of one represents the entry that best matches the MAC address. A value of two represents the second best matched entry, and so on.

dlswDirLocateMacLocation

Points to the dlswDirMacEntry.

dlswDirLocateNBTable

This table is used to retrieve all entries in the dlswDirNBTable that match a given NetBIOS name, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given NetBIOS name.

dlswDirLocateNBEntry

Indexed by dlswDirLocateNBName and dlswDirLocateNBMatch. The first object is the NetBIOS name of interest, and the second object is the order in the list of all entries that match the NetBIOS name.

dlswDirLocateNBName

The NetBIOS name to be located (no any char or wildcards).

dlswDirLocateNBMatch

The order of the entries of dlswDirNBTable that match dlswDirLocateNBName. A value of one represents the entry that best matches the NetBIOS name. A value of two represents the second best matched entry, and so on.

dlswDirLocateNBLocation

Points to the dlswDirNBEntry.

dlswCircuitStatActives

The current number of circuits in dlswCircuitTable that are not in the disconnected state.

dlswCircuitStatCreates

The total number of entries ever added to dlswCircuitTable, or reactivated upon exiting `disconnected' state.

dlswCircuitTable

This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, th ...

dlswCircuitEntry

dlswCircuitS1Mac

The MAC Address of End Station 1 (S1) used for this circuit.

dlswCircuitS1Sap

The SAP at End Station 1 (S1) used for this circuit.

dlswCircuitS1IfIndex

The ifEntry index of the local interface through which S1 can be reached.

dlswCircuitS1DlcType

The DLC protocol in use between the DLSw node and S1.

dlswCircuitS1RouteInfo

If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise the value will be an OCTET STRING of zero length.

dlswCircuitS1CircuitId

The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero lengt ...

dlswCircuitS1Dlc

Points to a conceptual row of the underlying DLC MIB, which could either be the standard MIBs (e.g., the SDLC), or an enterprise-specific DLC MIB.

dlswCircuitS2Mac

The MAC Address of End Station 2 (S2) used for this circuit.

dlswCircuitS2Sap

The SAP at End Station 2 (S2) used for this circuit.

dlswCircuitS2Location

The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively.

dlswCircuitS2TDomain

If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0.

dlswCircuitS2TAddress

If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.

dlswCircuitS2CircuitId

The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of ze ...

dlswCircuitOrigin

This object specifies which of the two end stations initiated the establishment of this circuit.

dlswCircuitEntryTime

The amount of time (in hundredths of a second) since this circuit table conceptual row was created.

dlswCircuitStateTime

The amount of time (in hundredths of a second) since this circuit entered the current state.

dlswCircuitState

The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. While all of the specified values may be re ...

dlswCircuitPriority

The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value `unsupported' should be returned.

dlswCircuitFCSendGrantedUnits

The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running ...

dlswCircuitFCSendCurrentWndw

The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying `r ...

dlswCircuitFCRecvGrantedUnits

The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this ...

dlswCircuitFCRecvCurrentWndw

The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the ...

dlswCircuitFCLargestRecvGranted

The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND operator bits. The value zero should b ...

dlswCircuitFCLargestSendGranted

The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLSw pacing protocol.

dlswCircuitFCHalveWndwSents

The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.

dlswCircuitFCResetOpSents

The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.

dlswCircuitFCHalveWndwRcvds

The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.

dlswCircuitFCResetOpRcvds

The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.

dlswCircuitDiscReasonLocal

The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect.

dlswCircuitDiscReasonRemote

The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a reason code in these messages, or the DLSw implementation does not report receiving one, the val ...

dlswCircuitDiscReasonRemoteData

Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the partner does not send this data in these messages, or the DLSw implementation does not report ...

dlswSdlcLsEntries

The number of entries in dlswSdlcLsTable.

dlswSdlcLsTable

The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching.

dlswSdlcLsEntry

The index of this table is the ifIndex value for the SDLC port which owns this link station and the poll address of the particular SDLC link station.

dlswSdlcLsLocalMac

The virtual MAC address used to represent the SDLC-attached link station to the rest of the DLSw network.

dlswSdlcLsLocalSap

The SAP used to represent this link station.

dlswSdlcLsLocalIdBlock

The block number is the first three digits of the node_id, if available. These 3 hexadecimal digits identify the product.

dlswSdlcLsLocalIdNum

The ID number is the last 5 digits of the node_id, if available. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is included in SNA ...

dlswSdlcLsRemoteMac

The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.

dlswSdlcLsRemoteSap

The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.

dlswSdlcLsRowStatus

This object is used by the manager to create or delete the row entry in the dlswSdlcLsTable following the RowStatus textual convention.

dlswTrapCntlTConnPartnerReject

Indicates whether the DLSw is permitted to emit partner reject related traps. With the value of `enabled' the DLSw will emit all partner reject related traps. With the value of `disabled' the DLSw will not emit any partner reject related traps. With the ...

dlswTrapCntlTConnProtViolation

Indicates whether the DLSw is permitted to generate protocol-violation traps on the events such as window size violation. The changes take effect immediately.

dlswTrapCntlTConn

Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emi ...

dlswTrapCntlCircuit

Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when ...

dlswNodeGroup

Conformance group for DLSw node general information.

dlswNodeNBGroup

Conformance group for DLSw node general information specifically for nodes that support NetBIOS.

dlswTConnStatGroup

Conformance group for statistics for transport connections.

dlswTConnConfigGroup

Conformance group for the configuration of transport connections.

dlswTConnOperGroup

Conformance group for operation information for transport connections.

dlswTConnNBGroup

Conformance group for operation information for transport connections, specifically for nodes that support NetBIOS.

dlswTConnTcpConfigGroup

Conformance group for configuration information for transport connections using TCP.

dlswTConnTcpOperGroup

Conformance group for operation information for transport connections using TCP.

dlswInterfaceGroup

Conformance group for DLSw interfaces.

dlswDirGroup

Conformance group for DLSw directory using MAC addresses.

dlswDirNBGroup

Conformance group for DLSw directory using NetBIOS names.

dlswDirLocateGroup

Conformance group for a node that can return directory entry order for a given MAC address.

dlswDirLocateNBGroup

Conformance group for a node that can return directory entry order for a given NetBIOS name.

dlswCircuitStatGroup

Conformance group for statistics about circuits.

dlswCircuitGroup

Conformance group for DLSw circuits.

dlswSdlcGroup

Conformance group for DLSw SDLC support.