DOCS-LOADBALANCING-MIB Download

docsLoadBalEnable

Setting this object to true(1) enables internal autonomous load balancing operation on this CMTS. Setting it to false(2) disables the autonomous load balancing operations. However moving a cable modem via docsLoadBalChgOverTable is allowed even when this ...

docsLoadBalChgOverMacAddress

The mac address of the cable modem that the CMTS instructs to move to a new downstream frequency and/or upstream channel.

docsLoadBalChgOverDownFrequency

The new downstream frequency to which the cable modem is instructed to move. The value 0 indicates that the CMTS does not create a TLV for the downstream frequency in the DCC-REQ message. This object has no meaning when executing UCC operations.

docsLoadBalChgOverUpChannelId

The new upstream channel ID to which the cable modem is instructed to move. The value -1 indicates that the CMTS does not create a TLV for the upstream channel ID in the channel change request.

docsLoadBalChgOverInitTech

The initialization technique that the cable modem is instructed to use when performing change over operation. By default this object is initialized with all the defined bits having a value of '1'.

docsLoadBalChgOverCmd

The change over command that the CMTS is instructed use when performing change over operation. The any(1) value indicates that the CMTS is to use its own algorithm to determine the appropriate command.

docsLoadBalChgOverCommit

The command to execute the DCC/UCC operation when set to true(1). The following are reasons for rejecting an SNMP SET to this object: - The MAC address in docsLoadBalChgOverMacAddr is not an existing MAC address in docsIfCmtsMacToCmEntry. - docsLoadBalChg ...

docsLoadBalChgOverLastCommit

The value of sysUpTime when docsLoadBalChgOverCommit was last set to true. Zero if never set.

docsLoadBalChgOverStatusTable

A table of CMTS operation entries to reports the status of cable modems instructed to move to a new downstream and/or upstream channel. Using the docsLoadBalChgOverGroup objects. An entry in this table is created or updated for the entry with docsIfCmtsCm ...

docsLoadBalChgOverStatusEntry

A CMTS operation entry to instruct a cable modem to move to a new downstream frequency and/or upstream channel. An operator can use this to initiate an operation in CMTS to instruct the selected cable modem to move to a new downstream frequency and/or ups ...

docsLoadBalChgOverStatusMacAddr

The mac address set in docsLoadBalChgOverMacAddress.

docsLoadBalChgOverStatusDownFreq

The Downstream frequency set in docsLoadBalChgOverDownFrequency.

docsLoadBalChgOverStatusUpChnId

The upstream channel ID set in docsLoadBalChgOverUpChannelId.

docsLoadBalChgOverStatusInitTech

The initialization technique set in docsLoadBalChgOverInitTech.

docsLoadBalChgOverStatusCmd

The load balancing command set in docsLoadBalChgOverCmd.

docsLoadBalChgOverStatusValue

The status of the specified DCC/UCC operation. The enumerations are: messageSent(1): The CMTS has sent change over request message to the cable modem. noOpNeed(2): A operation was requested in which neither the DS Frequency nor the Upstream Channel ID was ...

docsLoadBalChgOverStatusUpdate

The value of sysUpTime when docsLoadBalChgOverStatusValue was last updated.

docsLoadBalGrpTable

This table contains the attributes of the load balancing groups present in this CMTS.

docsLoadBalGrpEntry

A set of attributes of load balancing group in the CMTS. It is index by a docsLoadBalGrpId which is unique within a CMTS. Entries in this table persist after CMTS initialization.

docsLoadBalGrpId

A unique index assigned to the load balancing group by the CMTS.

docsLoadBalGrpIsRestricted

A value true(1)Indicates type of load balancing group. A Restricted Load Balancing Group is associated to a specific provisioned set of cable modems. Restricted Load Balancing Group is used to accommodate a topology specific or provisioning specific restr ...

docsLoadBalGrpInitTech

The initialization techniques that the CMTS can use when load balancing cable modems in the load balancing group. By default this object is initialized with all the defined bits having a value of '1'.

docsLoadBalGrpDefaultPolicy

Each Load Balancing Group has a default Load Balancing Policy. A policy is described by a set of conditions (rules) that govern the load balancing process for a cable modem. The CMTS assigns this Policy ID value to a cable modem associated with the group ...

docsLoadBalGrpEnable

Setting this object to true(1) enables internal autonomous load balancing on this group. Setting it to false(2) disables the load balancing operation on this group.

docsLoadBalGrpChgOverSuccess

The number of successful load balancing change over operations initiated within this load balancing group.

docsLoadBalGrpChgOverFails

The number of failed load balancing change over operations initiated within this load balancing group.

docsLoadBalGrpStatus

Indicates the status of the row in this table. Setting this object to 'destroy' or 'notInService' for a group ID entry already referenced by docsLoadBalChannelEntry, docsLoadBalChnPairsEntry or docsLoadBalRestrictCmEntry returns an error code inconsistent ...

docsLoadBalChannelTable

Lists all upstream and downstream channels associated with load balancing groups.

docsLoadBalChannelEntry

Lists a specific upstream or downstream, within a load Balancing group. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128) and docsCableUpstream(129) associated with the Load Balancing Group. Entries in this table pe ...

docsLoadBalChannelIfIndex

The ifIndex of either the downstream or upstream.

docsLoadBalChannelStatus

Indicates the status of the rows in this table. Creating entries in this table requires an existing value for docsLoadBalGrpId in docsLoadBalGrpEntry and an existing value of docsLoadBalChannelIfIndex in ifEntry, otherwise is rejected with error 'noCreati ...

docsLoadBalChnPairsTable

This table contains pairs of upstream channels within a Load Balancing Group. Entries in this table are used to override the initialization techniques defined for the associated Load Balancing Group.

docsLoadBalChnPairsEntry

An entry in this table describes a channel pair for which an initialization technique override is needed. On a CMTS which supports logical upstream channels (ifType is equal to docsCableUpstreamChannel(205)), the entries in this table correspond to pairs ...

docsLoadBalChnPairsIfIndexDepart

This index indicates the ifIndex of the upstream channel from which a cable modem would depart in a load balancing channel change operation.

docsLoadBalChnPairsIfIndexArrive

This index indicates the ifIndex of the upstream channel on which a cable modem would arrive in a load balancing channel change operation.

docsLoadBalChnPairsOperStatus

Operational status of the channel pair. The value operational(1) indicates that ifOperStatus of both channels is up(1). The value notOperational(2) means that ifOperStatus of one or both is not up(1).

docsLoadBalChnPairsInitTech

Specifies initialization technique for load balancing for the Depart/Arrive pair. By default this object's value is the initialization technique configured for the Load Balancing Group indicated by docsLoadBalGrpId.

docsLoadBalChnPairsRowStatus

The object for conceptual rows creation. An attempt to create a row with values for docsLoadBalChnPairsIfIndexDepart or docsLoadBalChnPairsIfIndexArrive which are not a part of the Load Balancing Group (or for a 2.0 CMTS are not logical channels (ifType 2 ...

docsLoadBalRestrictCmTable

Lists all cable modems in each Restricted Load Balancing Groups.

docsLoadBalRestrictCmEntry

An entry of modem within a restricted load balancing group type. An entry represents a cable modem that is associated with the Restricted Load Balancing Group ID of a Restricted Load Balancing Group. Entries in this table persist after CMTS initialization ...

docsLoadBalRestrictCmIndex

The index that uniquely identifies an entry which represents restricted cable modem(s) within each Restricted Load Balancing Group.

docsLoadBalRestrictCmMACAddr

Mac Address of the cable modem within the restricted load balancing group.

docsLoadBalRestrictCmMacAddrMask

A bit mask acting as a wild card to associate a set of modem MAC addresses to the same Group ID. Cable modem look up is performed first with entries containing this value not null, if several entries match, the largest consecutive bit match from MSB to LS ...

docsLoadBalRestrictCmStatus

Indicates the status of the rows in this table. The attempt to create an entry associated to a group ID with docsLoadBalGrpIsRestricted equal to false(2) returns an error 'noCreation'. There is no restriction on settings columns in this table any time.

docsLoadBalPolicyTable

This table describes the set of Load Balancing policies. Rows in this table might be referenced by rows in docsLoadBalGrpEntry.

docsLoadBalPolicyEntry

Entries containing rules for policies. When a load balancing policy is defined by multiple rules, all the rules apply. Load balancing rules can be created to allow for specific vendor-defined load balancing actions. However there is a basic rule that the ...

docsLoadBalPolicyId

An index identifying the Load Balancing Policy.

docsLoadBalPolicyRuleId

An index for the rules entries associated within a policy.

docsLoadBalPolicyRulePtr

A pointer to an entry in a rule table. E.g., docsLoadBalBasicRuleEnable in docsLoadBalBasicRuleEntry. A value pointing to zeroDotZero, an inactive Row or a non-existing entry is treated as no rule defined for this policy entry.

docsLoadBalPolicyRowStatus

The status of this conceptual row. There is no restriction on settings columns in this table when the value of docsLoadBalPolicyRowStatus is active(1). Setting this object to 'destroy' or 'notInService' for a row entry that is being referenced by docsLoad ...

docsLoadBalBasicRuleTable

DOCSIS defined basic ruleset for load Balancing Policy. This table enables of disable load balancing for the groups pointing to this ruleset in the policy group.

docsLoadBalBasicRuleEntry

An entry of DOCSIS defined basic ruleset. The object docsLoadBalBasicRuleEnable is used for instantiating an entry in this table via a RowPointer. Entries in this table persist after CMTS initialization.

docsLoadBalBasicRuleId

The unique index for this row.

docsLoadBalBasicRuleEnable

When using this ruleset, load balancing is enabled or disabled by the values enabled(1) and disabled(2) respectively. Additionally, a Load Balancing disabling period is defined in docsLoadBalBasicRuleDisStart and docsLoadBalBasicRuleDisPeriod if this obje ...

docsLoadBalBasicRuleDisStart

if object docsLoadBalBasicRuleEnable is disablePeriod(3) Load Balancing is disabled starting at this object value time (seconds from 12 AM). Otherwise, this object has no meaning.

docsLoadBalBasicRuleDisPeriod

If object docsLoadBalBasicRuleEnable is disablePeriod(3) Load Balancing is disabled for the period of time defined between docsLoadBalBasicRuleDisStart and docsLoadBalBasicRuleDisStart plus the period of time of docsLoadBalBasicRuleDisPeriod. Otherwise, t ...

docsLoadBalBasicRuleRowStatus

This object is to create or delete rows in this table. There is no restriction for changing this row status or object's values in this table at any time.

docsLoadBalCmtsCmStatusTable

The list contains the load balancing attributes associated with the cable modem.

docsLoadBalCmtsCmStatusEntry

Additional objects for docsIfCmtsCmStatusTable entry that relate to load balancing

docsLoadBalCmtsCmStatusGroupId

The Group ID associated with this cable modem.

docsLoadBalCmtsCmStatusPolicyId

The Policy ID associated with this cable modem.

docsLoadBalCmtsCmStatusPriority

The Priority associated with this cable modem.

docsLoadBalSystemGroup

A collection of objects providing system-wide parameters for load balancing.

docsLoadBalParametersGroup

A collection of objects containing the load balancing parameters.

docsLoadBalPoliciesGroup

A collection of objects providing policies.

docsLoadBalBasicRuleGroup

DOCSIS defined basic Ruleset for load balancing policies.

docsLoadBalCmtsCmStatusGroup

Cable mode status extension objects.