DOCS-SEC-MIB Download

docsSecCmtsServerCfgTftpOptions

This attribute instructs the CMTS to insert the source IP address and/or MAC address of received TFTP packets into the TFTP option fields before forwarding the packets to the Config File server. This attribute is only applicable when the TftpProxyEnabled ...

docsSecCmtsServerCfgConfigFileLearningEnable

This attribute enables and disables Configuration File Learning functionality. If this attribute is set to 'true' the CMTS will respond with Authentication Failure in the REG-RSP message when there is a mismatch between learned config file parameters and ...

docsSecCmtsEncryptEncryptAlgPriority

This attribute allows for configuration of a prioritized list of encryption algorithms the CMTS will use when selecting the primary SAID encryption algorithm for a given CM. The CMTS selects the highest priority encryption algorithm from this list that th ...

docsSecCmtsCmEaeExclusionTable

This object defines a list of CMs or CM groups to exclude from Early Authentication and Encryption (EAE). This object allows overrides to the value of EAE Control for individual CMs or group of CMs for purposes such as debugging. The CMTS supports a minim ...

docsSecCmtsCmEaeExclusionEntry

The conceptual row of docsSecCmtsCmEaeExclusion. The CMTS persists all instances of CmtsCmEaeExclusion across reinitializations.

docsSecCmtsCmEaeExclusionId

This key uniquely identifies the exclusion MAC address rule.

docsSecCmtsCmEaeExclusionMacAddr

This attribute identifies the CM MAC address. A match is made when a CM MAC address bitwise ANDed with the MacAddrMask attribute equals the value of this attribute.

docsSecCmtsCmEaeExclusionMacAddrMask

This attribute identifies the CM MAC address mask and is used with the MacAddr attribute.

docsSecCmtsCmEaeExclusionRowStatus

Controls and reflects the status of rows in this table. There is no restriction on changing values in a row of this table while the row is active.

docsSecCmtsSavControlCmAuthEnable

This attribute enables or disables Source Address Verification (SAV) for CM configured policies in the SavCmAuth object. If this attribute is set to 'false', the CM configured policies in the SavCmAuth object are ignored. This attribute is only applicable ...

docsSecSavCmAuthTable

This object defines a read-only set of SAV policies associated with a CM that the CMTS will use in addition to the CMTS verification of an operator assigned IP Address being associated with a CM. When the CMTS has not resolved a source address of a CM CPE ...

docsSecSavCmAuthEntry

The conceptual row of docsSecSavCmAuth.

docsSecSavCmAuthGrpName

This attribute references the Name attribute of the SavCfgList object of a CM. If the CM signaled group name is not configured in the CMTS, the CMTS ignores this attribute value for the purpose of Source Address Verification. The CMTS must allow the modif ...

docsSecSavCmAuthStaticPrefixListId

This attribute identifies the reference to a CMTS created subnet prefix list based on the CM signaled static prefix list TLV elements. The CMTS may reuse this attribute value to reference more than one CM when those CMs have signaled the same subnet prefi ...

docsSecSavCfgListTable

This object defines the CMTS configured subnet prefix extension to the SavCmAuth object. This object supports the creation and deletion of multiple instances. Creation of a new instance of this object requires the PrefixAddrType and PrefixAddr attributes ...

docsSecSavCfgListEntry

The conceptual row of docsSecSavCfgList. The CMTS persists all instances of SavCfgList across reinitializations.

docsSecSavCfgListName

This attribute is the key that identifies the instance of the SavCmAuth object to which this object extension belongs.

docsSecSavCfgListRuleId

This attribute is the key that identifies a particular subnet prefix rule of an instance of this object.

docsSecSavCfgListPrefixAddrType

This attribute identifies the IP address type of this subnet prefix rule.

docsSecSavCfgListPrefixAddr

This attribute corresponds to the IP address of this subnet prefix rule in accordance to the PrefixAddrType attribute.

docsSecSavCfgListPrefixLen

This attribute defines the length of the subnet prefix to be matched by this rule.

docsSecSavCfgListRowStatus

The row creation control of this conceptual row. An entry in this table can be set to active only when the following attributes are correctly assigned: PrefixAddrType PrefixAddress There are no restrictions to modify or delete entries in this table.

docsSecSavStaticListTable

This object defines a subnet prefix extension to the SavCmAuth object based on CM statically signaled subnet prefixes to the CMTS. When a CM signals to the CMTS static subnet prefixes, the CMTS must create a List Id to be referenced by the CM in the SavCm ...

docsSecSavStaticListEntry

The conceptual row of docsSecSavStaticList. The CMTS may persist instances of this object across reinitializations.

docsSecSavStaticListId

This key uniquely identifies the index that groups multiple subnet prefix rules. The CMTS assigns this value per CM or may reuse it among multiple CMs that share the same list of subnet prefixes.

docsSecSavStaticListRuleId

This key identifies a particular static subnet prefix rule of an instance of this object.

docsSecSavStaticListPrefixAddrType

This attribute identifies the IP address type of this subnet prefix rule.

docsSecSavStaticListPrefixAddr

This attribute corresponds to the IP address of this subnet prefix rule in accordance to the PrefixAddrType attribute.

docsSecSavStaticListPrefixLen

This attribute defines the length of the subnet prefix to be matched by this rule.

docsSecCmtsCmSavStatsTable

This object provides a read-only list of SAV counters for different service theft indications.

docsSecCmtsCmSavStatsEntry

The conceptual row of docsSecCmtsCmSavStats.

docsSecCmtsCmSavStatsSavDiscards

This attribute provides the information about number of dropped upstream packets due to SAV failure.

docsSecCmtsCertificateCertRevocationMethod

This attribute identifies which certificate revocation method is to be used by the CMTS to verify the cable modem certificate validity. The certificate revocation methods include Certification Revocation List (CRL) and Online Certificate Status Protocol ( ...

docsSecCmtsCertRevocationListUrl

This attribute contains the URL from where the CMTS will retrieve the CRL. When this attribute is set to a URL value different from the current value, it triggers the CMTS to retrieve the CRL from that URL. If the value of this attribute is a zero-length ...

docsSecCmtsCertRevocationListRefreshInterval

This attribute contains the refresh interval for the CMTS to retrieve the CRL (referred to in the Url attribute) with the purpose of updating its Certificate Revocation List. This attribute is meaningful if the tbsCertList.nextUpdate attribute does not ex ...

docsSecCmtsCertRevocationListLastUpdate

This attribute contains the last date and time when the CRL was retrieved by the CMTS. This attribute returns the initial EPOC time if the CRL has not being updated. The CMTS persists the value of LastUpdate across reinitializations.

docsSecCmtsOnlineCertStatusProtocolUrl

This attribute contains the URL string to retrieve OCSP information. If the value of this attribute is a zero-length string, the CMTS does not attempt to request the status of a CM certificate. The CMTS persists the value of Url across reinitializations.

docsSecCmtsOnlineCertStatusProtocolSignatureBypass

This attribute enables or disables signature checking on OCSP response messages. The CMTS persists the value of SignatureBypass across reinitializations.

docsSecGroup

Group of objects implemented in the CMTS.