EICON-MIB-ROUTER Download

rtName

The name advertised by the router agent using SAP.

rtProductName

The Product name ie. Router for Netware.

rtReleaseVersion

Ex.: Ver. 3 Rel. 2.

rtReleaseDate

Format: 1993/03/25.

rtOperState

The operational state of the router.

rtAdminStateCtr

The administrative state of the router. Management station will change this value to start or stop the router.

rtType

Type of router.

rtTimeUp

The time elapsed since the router was started.

rtNumberOfPorts

The number of Eicon ports currently used by the router.

rtMaxCircuits

The maximum number of connections that can be configured for this router.

rtAvailableCircuits

The number of connections still available for this router.

rtAvailableLANMapping

The available number of LAN protocol mappings for all connections.

rtMaxLANMapping

The maximum number of LAN protocol mappings for all connections.

rtGlobalTxPackets

The number of packets transmitted by the router on all ports

rtGlobalTxBytesLow

The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.

rtGlobalTxBytesHigh

The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.

rtGlobalRxPackets

The number of packets received by the router on all ports

rtGlobalRxBytesLow

The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.

rtGlobalRxBytesHigh

The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.

rtGlobalTxDropNoRoute

The number of transmit packets dropped on all ports because no route was found.

rtGlobalTxDropNoResource

The number of transmit packets dropped on all ports because resources were exhausted.

rtGlobalTxDropUnknownProt

The number of transmit packets dropped because the WAN protocol is not supported.

rtGlobalRxDropNoResource

The number of received packets dropped on all ports because resources were exhausted.

rtGlobalRxDropUnknownProt

The number of received packets dropped because a LAN protocol is not supported.

rtGlobalRxError

The number of errors encountered when receiving from the EiconCard(s).

rtGlobalCountersReset

This variable is used to reset all router global counters.

rtTraceCtrl

This object is used to start or stop the trace with the parameters specified by the following trace objects.

rtTraceFileName

The (fully qualified) file name for the file which will hold the trace.

rtTraceInterfaceType

The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).

rtPortTable

The router port table.

rtPortEntry

The router information for one port.

rtPortIndex

Index of this table

rtPortNumber

EiconCard port number.

rtPortProtocol

Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).

rtPortTxThroughput

Throughput calculated for the transmision.

rtPortRxThroughput

Throughput calculated for the reception.

rtPortTxPackets

Number of packets transmitted for this port.

rtPortTxBytesLow

Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.

rtPortTxBytesHigh

Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.

rtPortRxPackets

Number of packets received for this port.

rtPortRxBytesLow

Number of bytes received for this port; the low 32 bits of the 64 bits counter.

rtPortRxBytesHigh

Number of bytes received for this port; the high 32 bits of the 64 bits counter.

rtPortTxDropNoResource

Number of transmit packets dropped because no resources were available.

rtPortRxError

Number of packets received with an EiconCard error.

rtPortCountersReset

This object is used to reset the values of all counters for this port.

rtConnFreeIndex

The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent a ...

rtConnTable

The table of WAN connections to peer routers.

rtConnEntry

The routing information for one destination.

rtConnIndex

The index used to identify the connection entry.

rtConnName

The name used to identify the connection entry.

rtConnComment

Optional comment about the connection entry.

rtConnEntryStatus

The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.

rtConnOperState

The object describing the state of the connection.

rtConnAdminStateCtr

The object used to start and stop the circuit for this connection entry.

rtConnAutoStart

The object used to indicate if the connnection should be activated every time the router starts. Yes is the default.

rtConnType

The type of connection.

rtConnInactivityTimeout

The connection inactivity timeout in seconds.

rtConnPortNumber

The EiconCard port number for this connection.

rtConnCompression

The object indicating the type of compression to use, if any.

rtConnRetryNum

The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.

rtConnRetryDelay

The connection retry delay in seconds.

rtConnPeerRouter

The type of the peer router for this connection.

rtConnLanProtocol

The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.

rtConnWanProtocol

The object indicates which WAN protocol will be used for this connection.

rtConnX25LocalDTE

The X25 Local DTE Address configured for this connection.

rtConnX25RemoteDTE

The X25 Remote DTE Address configured for this connection.

rtConnX25CallingFacilities

The X25 Calling Facilities configured for this connection.

rtConnX25ListeningFacilities

The X25 Listening Facilities configured for this connection.

rtConnX25UserData

The X25 User Data configured for this connection.

rtConnX25Pvc

The X25 PVC configured for this connection.

rtConnFrDlci

The Frame Relay DLCI configured for this connection.

rtConnSnaPuName

Physical Unit Name.

rtConnSnaLocalFqName

Local fully qualified name.

rtConnSnaRemoteFqName

Remote fully qualified name.

rtConnSnaModeName

Mode name.

rtConnSnaSendPaceWindow

Send Pace Window.

rtConnSnaReceivePaceWindow

Receive Pace Window.

rtConnSnaRuSendLow

Request Unit send low.

rtConnSnaRuReceiveLow

Request Unit receive low.

rtConnSnaRuSendHigh

Request Unit send high.

rtConnSnaRuReceiveHigh

Request unit receive high.

rtConnUsage

The connection can be defined as a primary or a backup connection for a primary.

rtConnFrSegmentation

The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection.

rtConnFrXid

The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection

rtConnPrimOrBackName

This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.

rtConnRipSapUpdateType

The update type of RIP / SAP.

rtConnSAPDelay

The delay in minutes between the SAP updates on this WAN connection.

rtConnRIPDelay

The delay in minutes between the RIP updates on this WAN connection.

rtIPMapFreeIndex

The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatus object when the Management station attempts to write its value to createRequest (2). If the ...

rtIPMappingTable

The IP mapping table.

rtIPMappingEntry

One mapping information entry.

rtIPMapIndex

The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.

rtIPMapConnIndex

Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.

rtIPMapEntryStatus

The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.

rtIPMapNextHop

The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.

rtIPMapBroadcast

The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value.

rtIPMapIPMask

The IP address mask to be used for this mapping.

rtIPMapVJCompress

The object which indicates if the VanJacobsen compression is to be used for this mapping.

rtCircuitTable

The router circuit table.

rtCircuitEntry

The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.

rtCircuitConnIndex

Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.

rtCircuitStatus

Indicates the circuit status.

rtCircuitTimeUp

Time elapsed since this circuit was started.

rtCircuitErrCode

Last error code returned from the EiconCard.

rtCircuitSessionType

Type of circuit session.

rtCircuitConnLSN

Connection Manager LSN used for management.

rtCircuitDataLSN

Connection Manager LSN used for data.

rtCircuitCmSelector

Handle returned by Connection Manager for this circuit.

rtCircuitCompression

Compression on/off, after negotiation.

rtCircuitCompAlgorithm

Compression type, after negotiation.

rtCircuitBeforeComp

Number of bytes sent before compression.

rtCircuitAfterComp

Number of bytes sent after compression.

rtCircuitTxErr

The number of Transmit errors

rtCircuitBoundLANProtocol

The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.

rtCircuitRemoteRouter

The name of the remote router discovered by the local router.

rtCircuitCountersReset

The object is used to reset all counters for this circuit.

rtCircuitWanProtocol

The object indicates which WAN protocol will be used for this connection.

rtCircuitX25LocalDTE

The X25 Local DTE Address for this circuit

rtCircuitX25RemoteDTE

The X25 Remote DTE Address for this circuit

rtCircuitX25CallingFacilities

The X25 Calling Facilities for this circuit

rtCircuitX25ListeningFacilities

The X25 Listening Facilities for this circuit

rtCircuitX25UserData

The X25 User Data for this circuit

rtCircuitX25Cause

The Cause of Circuit connection failure

rtCircuitX25Diag

Diagnostics code of the Circuit connection failure.

rtCircuitX25Pvc

The X25 PVC for this circuit.

rtCircuitFrDlci

The Frame Relay DLCI for this circuit.

rtCircuitFrSegmentation

The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit.

rtCircuitFrXIDNegot

The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit.

rtCircuitFrXIDPacketSize

The size of the Frame Relay XID packet.

rtCircuitFrCongestion

The object indicates if Frame Relay can be congested on this circuit.

rtCircuitIPTable

The router IP info table.

rtCircuitIPEntry

The circuit information specific to IP.

rtCircuitIPConnIndex

Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.

rtCircuitIPRemoteAddress

Remote router IP address.

rtCircuitIPLocalAddress

Local router IP address.

rtCircuitIPTxPackets

Number of transmit packets which carry IP.

rtCircuitIPTxBytes

Number of transmit bytes which carry IP.

rtCircuitIPRxPackets

Number of received packets which carry IP.

rtCircuitIPRxBytes

Number of received bytes which carry IP.

rtCircuitIPXTable

The router IPX info table.

rtCircuitIPXEntry

The circuit information.

rtCircuitIPXConnIndex

Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.

rtCircuitIPXRemoteNode

Remote router node address.

rtCircuitIPXRemoteNetwork

Remote router network address.

rtCircuitIPXLocalNode

Local router node address.

rtCircuitIPXLocalNetwork

Local router network address.

rtCircuitIPXTxPackets

Number of transmit packets which carry IPX.

rtCircuitIPXTxBytes

Number of transmit bytes which carry IPX.

rtCircuitIPXRxPackets

Number of received packets which carry IPX.

rtCircuitIPXRxBytes

Number of received bytes which carry IPX.

rtCircuitATTable

The router AT info table.

rtCircuitATEntry

The AT circuit information.

rtCircuitATConnIndex

Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.

rtCircuitATRemoteNet

Remote router network address.

rtCircuitATRemoteNode

Remote router node address.

rtCircuitATLocalNet

Local router network address.

rtCircuitATLocalNode

Local router node address.

rtCircuitATTxPackets

Number of transmit packets which carry AT.

rtCircuitATTxBytes

Number of transmit bytes which carry AT.

rtCircuitATRxPackets

Number of received packets which carry AT.

rtCircuitATRxBytes

Number of received bytes which carry AT.

rtMaxIPFilter

The maximum number of IP Filters that can be configured for this router.

rtAvailableIPFilter

The number of IP Filters still available for this router.

rtIPFilterDropStatsIn

Total number of incoming packets dropped.

rtIPFilterDropStatsOut

Total number of outgoing packets dropped.

rtIPFilterForwardStatsIn

Total number of incoming packets forwarded.

rtIPFilterForwardStatsOut

Total number of outgoing packets forwarded.

rtIPFilterFreeIndex

This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value for any ...

rtIPFilterTable

The IP Filter table.

rtIPFilterEntry

Information on an IP Filter.

rtIPFilterConnIndex

Same as rtConnIndex.

rtIPFilterIndex

Index of IP Filter for the connection.

rtIPFilterEntryStatus

The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.

rtIPFilterOperState

The object indicates the state of the IP Filter.

rtIPFilterAdminStateCtr

The object used to start and stop the IP Filter.

rtIPFilterPosition

This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manager should use a valid rtIPFilterIndex to set this variable. The new filter will be inserted af ...

rtIPFilterAction

Drop (1) or Forward (2) the information.

rtIPFilterDirection

Specifies if the filter is applied to outgoing, incoming or both ways packets.

rtIPFilterPortType

Protocol type.

rtIPFilterLowSrcPort

Low Source Port.

rtIPFilterHighSrcPort

High Source Port.

rtIPFilterLowDestPort

Low Destination Port.

rtIPFilterHighDestPort

High Destination Port.

rtIPFilterIPAddressSrc

Source IP Address.

rtIPFilterIPMaskSrc

Mask of the source IP Address.

rtIPFilterIPAddressDest

Destination IP Address.

rtIPFilterIPMaskDest

Mask of the destination IP Address.

rtIPFilterStatsIn

The number of incoming packets that match the filter.

rtIPFilterStatsOut

The number of outgoing packets that match the filter.

rtActionState

The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll that variable after initiating an action on the router. The value done(1) indicates that the acti ...

rtActionError

The error code after the unsuccessful operation.