EICON-SDLC-MIB Download

sdlcCfgTable

The SDLC configuration attributes table, one row per port. This information comes from the configuration file (db).

sdlcCfgEntry

The set of SDLC configuration attributes for one port.

sdlcCfgPortRef

The Id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply.

sdlcCfgMaxLinkStation

Maximum number of stations for this port (1..32), default is 9.

sdlcCfgT1

Check point timer, default is 2900.

sdlcCfgT2

Poll delay timer, default is 200.

sdlcCfgT3

Slow poll timer, default is 15000.

sdlcCfgT4

Idle timer, default is 60000.

sdlcCfgMaxFrameSz

Number of octets per frame (N1), default is 267.

sdlcCfgMaxRetryCount

Maximum retry count (N2), default is 10.

sdlcCfgMaxWindowSz

Maximum window size (K), default is 7.

sdlcInfoTable

The dynamic (status) attributes table, one row per port (line).

sdlcInfoEntry

The set of status attributes for one port (line).

sdlcInfoPortRef

The Id of the port, equal to portIndex from the port group. It identifies the port to which the information parameters apply.

sdlcInfoAdminStatusCtr

The control parameter, used to stop or start the SDLC port.

sdlcInfoOperStatus

The status of the SDLC line.

sdlcInfoDial

The value indicates whether the port is connected to a leased line or to a dial-up line.

sdlcInfoDuplex

The value indicates the type of the device to which the port is connected. The mode of transmission/reception can be full or half duplex.

sdlcInfoMaxFrameSz

The maximum frame size

sdlcInfoMaxRetryCount

The number of retries for negative acknowledgement of a frame.

sdlcInfoMaxWindowSz

Maximum window size.

sdlcInfoMaxLinkStation

The number of multi-drop stations defined for that line.

sdlcInfoNbStationInUse

The number of stations currently in use.

sdlcInfoStartTime

The time at which the line was started. Equals to sysUpTime.

sdlcInfoModemTime

The time at which the modem state changed. Equals to sysUpTime.

sdlcLinkInfoTable

Dynamic attributes table, one row per link station

sdlcLinkInfoEntry

The set of dynamic attributes for one link station.

sdlcLinkInfoPortRef

The Id of the port, equal to portIndex from the port group. It identifies the port to which the information parameters apply.

sdlcLinkInfoStationAddr

The address of the station attached to the line. This number represents a logical connection number and is assigned by protocol software.

sdlcLinkInfoAdminStatusCtr

The control parameter used to close the connection.

sdlcLinkInfoProtocolState

The protocol state of the SDLC link.

sdlcLinkInfoUserState

The user state of the connection.

sdlcLinkInfoStationType

The type of link station.

sdlcLinkInfoStartTime

The time at which this link was started. Equals to sysUpTime.

sdlcLinkInfoChangeTime

The time at which the link state changed. Equals to sysUpTime.

sdlcLinkInfoDataTime

The time of non-poll data. Equals to sysUpTime.

sdlcLinkInfoMaxOut

Maximum number of output frames per window.

sdlcLinkInfoMaxIn

Maximum number of input frames per window.

sdlcLinkInfoMaxData

Maximum number of octets per frame.

sdlcLinkInfoLocalBusy

Busy state flag.

sdlcLinkInfoRemoteBusy

Busy state flag.

sdlcLinkInfoNS

The NS counter.

sdlcLinkInfoNR

The NR counter.

sdlcLinkInfoLNR

Last received sequence number.

sdlcCountTable

The runtime counters table, one row per port

sdlcCountEntry

The set of counters values for one port.

sdlcCountPortRef

The Id of the port, equal to portIndex from the port group. It identifies the port to which the information parameters apply.

sdlcCountT1expires

The number of times the Checkpoint Timer (T1) protocol timer has been exceeded.

sdlcCountRetransmis

The number of retransmitted frames.

sdlcCountSNRMTxs

The number of set normal response mode U-frames transmitted.

sdlcCountSNRMRxs

The number of set normal response mode U-frames received.

sdlcCountDISCTxs

The number of disconnect U-frames sent.

sdlcCountDISCRxs

The number of disconnect U-frames received.

sdlcCountUAsTxs

The number of unnumbered acknowledgement U-frames sent.

sdlcCountUAsRxs

The number of unnumbered acknowledgement U-frames received.

sdlcCountDMsTxs

The number of disconnected mode U-frames sent.

sdlcCountDMsRxs

The number of disconnected mode U-frames received.

sdlcCountFRMRsTxs

The number of frame reject U-frames sent.

sdlcCountFRMRsRxs

The number of frame reject U-frames received.

sdlcCountXIDsTxs

The number of XID U-frames sent.

sdlcCountXIDsRxs

The number of XID U-frames received.

sdlcCountINFOsTxs

The number of information U-frames sent.

sdlcCountINFOsRxs

The number of information frames received.

sdlcCountRRsTxs

The number of receiver ready I-frames sent.

sdlcCountRRsRxs

The number of receiver ready I-frames received.

sdlcCountRNRsTxs

The number of receiver not ready I-frames sent.

sdlcCountRNRsRxs

The number of receiver not ready I-frames received.

sdlcCountREJsTxs

The number of reject I-frames sent.

sdlcCountREJsRxs

The number of reject I-frames received.

sdlcCountTestTxs

The number of TEST U-frames sent.

sdlcCountTestRxs

The number of TEST U-frames received.

sdlcCountBadFcsTxs

The number of bad U-frames sent.

sdlcCountBadFcsRxs

The number of bad U-frames received.

sdlcCountAbortTxs

The number of Abort U-frames sent.

sdlcCountAbortRxs

The number of Abort U-frames received.

sdlcCountTxUnderRs

The number of times an underrun occured.

sdlcCountRxOverRs

The number of times an overrun occured.

sdlcCountUnknowTxs

The number of unknown frames transmitted.

sdlcCountUnknowRxs

The number of unknown frames recieved.

sdlcLinkCountTable

The runtime counters table, one row per link station.

sdlcLinkCountEntry

The set of counters values for one specific link station.

sdlcLinkCountPortRef

The Id of the port, equal to portIndex from the port group. It identifies the port to which the information parameters apply.

sdlcLinkCountStationRef

The address of the station attached to the line. This number represents a logical connection number and is assigned by protocol software. Equals to sdlcLinkInfoAddr.

sdlcLinkCountT1expires

The number of times the Checkpoint timer (T1) protocol timer has been exceeded.

sdlcLinkCountRetransmis

The number of retransmitted frames.

sdlcLinkCountSNRMTxs

The number of set normal response mode U-frames transmitted.

sdlcLinkCountSNRMRxs

The number of set normal response mode U-frames received.

sdlcLinkCountDISCTxs

The number of disconnect U-frames sent.

sdlcLinkCountDISCRxs

The number of disconnect U-frames received.

sdlcLinkCountUAsTxs

The number of unnumbered acknowledgement U-frames sent.

sdlcLinkCountUAsRxs

The number of unnumbered acknowledgement U-frames recvd.

sdlcLinkCountDMsTxs

The number of disconnected mode U-frames sent.

sdlcLinkCountDMsRxs

The number of disconnected mode U-frames received.

sdlcLinkCountFRMRsTxs

The number of frame reject U-frames sent.

sdlcLinkCountFRMRsRxs

The number of frame reject U-frames received.

sdlcLinkCountXIDsTxs

The number of XID U-frames sent.

sdlcLinkCountXIDsRxs

The number of XID U-frames received.

sdlcLinkCountINFOsTxs

The number of information U-frames sent.

sdlcLinkCountINFOsRxs

The number of information U-frames received.

sdlcLinkCountRRsTxs

The number of receiver ready I-frames sent.

sdlcLinkCountRRsRxs

The number of receiver ready I-frames received.

sdlcLinkCountRNRsTxs

The number of receiver not ready I-frames sent.

sdlcLinkCountRNRsRxs

The number of receiver not ready I-frames received.

sdlcLinkCountREJsTxs

The number of reject I-frames sent.

sdlcLinkCountREJsRxs

The number of reject I-frames received.

sdlcLinkCountTestTxs

The number of TEST U-frames sent.

sdlcLinkCountTestRxs

The number of TEST U-frames received.