ETHER-WIS Download

etherWisDeviceTable

The table for Ethernet WIS devices

etherWisDeviceEntry

An entry in the Ethernet WIS device table. For each instance of this object there MUST be a corresponding instance of sonetMediumEntry.

etherWisDeviceTxTestPatternMode

This variable controls the transmit test pattern mode. The value none(1) puts the the WIS transmit path into the normal operating mode. The value squareWave(2) puts the WIS transmit path into the square wave test pattern mode described in [IEEE 802.3 Std ...

etherWisDeviceRxTestPatternMode

This variable controls the receive test pattern mode. The value none(1) puts the the WIS receive path into the normal operating mode. The value prbs31(3) puts the WIS receive path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause ...

etherWisDeviceRxTestPatternErrors

This object counts the number of errors detected when the WIS receive path is operating in the PRBS31 test pattern mode. It is reset to zero when the WIS receive path initially enters that mode, and it increments each time the PRBS pattern checker detect ...

etherWisSectionCurrentTable

The table for the current state of Ethernet WIS sections.

etherWisSectionCurrentEntry

An entry in the etherWisSectionCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetSectionCurrentEntry.

etherWisSectionCurrentJ0Transmitted

This is the 16-octet section trace message that is transmitted in the J0 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the section trace function is not used, and the implementation SHOULD use tha ...

etherWisSectionCurrentJ0Received

This is the 16-octet section trace message that was most recently received in the J0 byte.

etherWisPathCurrentTable

The table for the current state of Ethernet WIS paths.

etherWisPathCurrentEntry

An entry in the etherWisPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetPathCurrentEntry.

etherWisPathCurrentStatus

This variable indicates the current status of the path payload with a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisPathLOP(0) This bit is set to indicate that an LOP-P (Loss of Pointer - Path) def ...

etherWisPathCurrentJ1Transmitted

This is the 16-octet path trace message that is transmitted in the J1 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the path trace function is not used, and the implementation SHOULD use that valu ...

etherWisPathCurrentJ1Received

This is the 16-octet path trace message that was most recently received in the J1 byte.

etherWisFarEndPathCurrentTable

The table for the current far-end state of Ethernet WIS paths.

etherWisFarEndPathCurrentEntry

An entry in the etherWisFarEndPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetFarEndPathCurrentEntry.

etherWisFarEndPathCurrentStatus

This variable indicates the current status at the far end of the path using a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisFarEndPayloadDefect(0) A far end payload defect (i.e., far end PLM-P or L ...

etherWisDeviceGroupBasic

A collection of objects that support test features required of all WIS devices.

etherWisDeviceGroupExtra

A collection of objects that support optional WIS device test features.

etherWisSectionGroup

A collection of objects that provide required information about a WIS section.

etherWisPathGroup

A collection of objects that provide required information about a WIS path.

etherWisFarEndPathGroup

A collection of objects that provide required information about the far end of a WIS path.