FIBRE-CHANNEL-FE-MIB Download

fcFeFabricName

The Name_Identifier of the Fabric to which this Fabric Element belongs.

fcFeElementName

The Name_Identifier of the Fabric Element.

fcFeModuleCapacity

The maximum number of modules in the Fabric Element, regardless of their current state.

fcFeModuleTable

A table that contains, one entry for each module in the Fabric Element, information of the modules.

fcFeModuleEntry

An entry containing the configuration parameters of a module.

fcFeModuleIndex

This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.

fcFeModuleDescr

A textual description of the module. This value should include the full name and version identification of the module.

fcFeModuleObjectID

The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, ...

fcFeModuleOperStatus

This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) the module is under testing; and faulty(4) the module is defective in some way.

fcFeModuleLastChange

This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted.

fcFeModuleFxPortCapacity

The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be contiguous.

fcFeModuleName

The Name_Identifier of the module.

fcFxPortTable

A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts.

fcFxPortEntry

An entry containing the configuration and service parameters of a FxPort.

fcFxPortIndex

This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized.

fcFxPortName

The World_wide Name of this FxPort. Each FxPort has a unique Port World_wide Name within the Fabric.

fcFxPortFcphVersionHigh

The highest or most recent version of FC-PH that the FxPort is configured to support.

fcFxPortFcphVersionLow

The lowest or earliest version of FC-PH that the FxPort is configured to support.

fcFxPortBbCredit

The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort.

fcFxPortRxBufSize

The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.

fcFxPortRatov

The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (see next object) plus twice the maximum time that a ...

fcFxPortEdtov

The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition.

fcFxPortCosSupported

A value indicating the set of Classes of Service supported by the FxPort.

fcFxPortIntermixSupported

A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection.

fcFxPortStackedConnMode

A value indicating the mode of Stacked Connect supported by the FxPort.

fcFxPortClass2SeqDeliv

A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort.

fcFxPortClass3SeqDeliv

A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort.

fcFxPortHoldTime

The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.

fcFxPortStatusTable

A table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts.

fcFxPortStatusEntry

An entry containing operational status and parameters of a FxPort.

fcFxPortID

The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login.

fcFxPortBbCreditAvailable

The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.

fcFxPortOperMode

The current operational mode of the FxPort.

fcFxPortAdminMode

The desired operational mode of the FxPort.

fcFxPortPhysTable

A table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts.

fcFxPortPhysEntry

An entry containing physical level status and parameters of a FxPort.

fcFxPortPhysAdminStatus

The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts st ...

fcFxPortPhysOperStatus

The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1 ...

fcFxPortPhysLastChange

The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted.

fcFxPortPhysRttov

The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization.

fcFxLoginTable

A table that contains, one entry for each NxPort attached to a particular FxPort in the Fabric Element, services parameters established from the most recent Fabric Login, explicit or implicit. Note that an FxPort may have one or more NxPort attached to it ...

fcFxLoginEntry

An entry containing service parameters established from a successful Fabric Login.

fcFxPortNxLoginIndex

The object identifies the associated NxPort in the attachment for which the entry contains information.

fcFxPortFcphVersionAgreed

The version of FC-PH that the FxPort has agreed to support from the Fabric Login

fcFxPortNxPortBbCredit

The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer-to- buffer flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow cont ...

fcFxPortNxPortRxDataFieldSize

The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort.

fcFxPortCosSuppAgreed

A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request.

fcFxPortIntermixSuppAgreed

A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported.

fcFxPortStackedConnModeAgreed

A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agreed.

fcFxPortClass2SeqDelivAgreed

A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service has been agreed.

fcFxPortClass3SeqDelivAgreed

A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed.

fcFxPortNxPortName

The port name of the attached NxPort.

fcFxPortConnectedNxPort

The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a connection, then the value of this object is '000000'H.

fcFxPortBbCreditModel

This object identifies the BB_Credit model used by the FxPort.

fcFxPortErrorTable

A table that contains, one entry for each FxPort, counters that record the numbers of errors detected.

fcFxPortErrorEntry

An entry containing error counters of a FxPort.

fcFxPortLinkFailures

The number of link failures detected by this FxPort.

fcFxPortSyncLosses

The number of loss of synchronization detected by the FxPort.

fcFxPortSigLosses

The number of loss of signal detected by the FxPort.

fcFxPortPrimSeqProtoErrors

The number of primitive sequence protocol errors detected by the FxPort.

fcFxPortInvalidTxWords

The number of invalid transmission word detected by the FxPort.

fcFxPortInvalidCrcs

The number of invalid CRC detected by this FxPort.

fcFxPortDelimiterErrors

The number of Delimiter Errors detected by this FxPort.

fcFxPortAddressIdErrors

The number of address identifier errors detected by this FxPort.

fcFxPortLinkResetIns

The number of Link Reset Protocol received by this FxPort from the attached NxPort.

fcFxPortLinkResetOuts

The number of Link Reset Protocol issued by this FxPort to the attached NxPort.

fcFxPortOlsIns

The number of Offline Sequence received by this FxPort.

fcFxPortOlsOuts

The number of Offline Sequence issued by this FxPort.

fcFxPortC1AccountingTable

A table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized.

fcFxPortC1AccountingEntry

An entry containing Class 1 accounting information for each FxPort.

fcFxPortC1InFrames

The number of Class 1 frames (other than Class 1 connect- request) received by this FxPort from its attached NxPort.

fcFxPortC1OutFrames

The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort.

fcFxPortC1InOctets

The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.

fcFxPortC1OutOctets

The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort.

fcFxPortC1Discards

The number of Class 1 frames discarded by this FxPort.

fcFxPortC1FbsyFrames

The number of F_BSY frames generated by this FxPort against Class 1 connect-request.

fcFxPortC1FrjtFrames

The number of F_RJT frames generated by this FxPort against Class 1 connect-request.

fcFxPortC1InConnections

The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect- request.

fcFxPortC1OutConnections

The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request.

fcFxPortC1ConnTime

The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset.

fcFxPortC2AccountingTable

A table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized.

fcFxPortC2AccountingEntry

An entry containing Class 2 accounting information for each FxPort.

fcFxPortC2InFrames

The number of Class 2 frames received by this FxPort from its attached NxPort.

fcFxPortC2OutFrames

The number of Class 2 frames delivered through this FxPort to its attached NxPort.

fcFxPortC2InOctets

The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.

fcFxPortC2OutOctets

The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.

fcFxPortC2Discards

The number of Class 2 frames discarded by this FxPort.

fcFxPortC2FbsyFrames

The number of F_BSY frames generated by this FxPort against Class 2 frames.

fcFxPortC2FrjtFrames

The number of F_RJT frames generated by this FxPort against Class 2 frames.

fcFxPortC3AccountingTable

A table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized.

fcFxPortC3AccountingEntry

An entry containing Class 3 accounting information for each FxPort.

fcFxPortC3InFrames

The number of Class 3 frames received by this FxPort from its attached NxPort.

fcFxPortC3OutFrames

The number of Class 3 frames delivered through this FxPort to its attached NxPort.

fcFxPortC3InOctets

The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.

fcFxPortC3OutOctets

The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.

fcFxPortC3Discards

The number of Class 3 frames discarded by this FxPort.

fcFxPortCapTable

A table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element.

fcFxPortCapEntry

An entry containing the Cap of a FxPort.

fcFxPortCapFcphVersionHigh

The highest or most recent version of FC-PH that the FxPort is capable of supporting.

fcFxPortCapFcphVersionLow

The lowest or earliest version of FC-PH that the FxPort is capable of supporting.

fcFxPortCapBbCreditMax

The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.

fcFxPortCapBbCreditMin

The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.

fcFxPortCapRxDataFieldSizeMax

The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.

fcFxPortCapRxDataFieldSizeMin

The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.

fcFxPortCapCos

A value indicating the set of Classes of Service that the FxPort is capable of supporting.

fcFxPortCapIntermix

A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.

fcFxPortCapStackedConnMode

A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting.

fcFxPortCapClass2SeqDeliv

A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery.

fcFxPortCapClass3SeqDeliv

A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery.

fcFxPortCapHoldTimeMax

The maximum holding time (in microseconds) that the FxPort is capable of supporting.

fcFxPortCapHoldTimeMin

The minimum holding time (in microseconds) that the FxPort is capable of supporting.

fcFeConfigGroup

A collection of objects providing the configuration and service parameters of the Fabric Element, the modules, and FxPorts.

fcFeStatusGroup

A collection of objects providing the operational status and established service parameters for the Fabric Element and the attached NxPorts.

fcFeErrorGroup

A collection of objects providing various error statistics detected by the FxPorts.

fcFeClass1AccountingGroup

A collection of objects providing various class 1 performance statistics detected by the FxPorts.

fcFeClass2AccountingGroup

A collection of objects providing various class 2 performance statistics detected by the FxPorts.

fcFeClass3AccountingGroup

A collection of objects providing various class 3 performance statistics detected by the FxPorts.

fcFeCapabilitiesGroup

A collection of objects providing the inherent capability of each FxPort within the Fabric Element.