GENERIC-3COM-VLAN-MIB-1-0-7 Download

a3ComVlanGlobalMappingTable

This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier.

a3ComVlanGlobalMappingEntry

An individual VLAN interface global mapping entry. Entries in this table are created by setting the a3ComVlanIfGlobalIdentifier object in the a3ComVlanIfTable to a non-zero value.

a3ComVlanGlobalMappingIdentifier

An index into the a3ComVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally ...

a3ComVlanGlobalMappingIfIndex

The value of a3ComVlanIfIndex for the VLAN interface in the a3ComVlanIfTable, which is bound to the global identifier specified by this entry.

a3ComVlanIfTable

This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan.

a3ComVlanIfEntry

An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the a3ComNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the ...

a3ComVlanIfIndex

The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the a3ComNextAvailableVirtIfIndex object.

a3ComVlanIfDescr

This is a description of the VLAN interface.

a3ComVlanIfType

The VLAN interface type.

a3ComVlanIfGlobalIdentifier

An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN int ...

a3ComVlanIfInfo

A TLV encoded information string for the VLAN interface. The information contained within this string corresponds to VLAN information not contained within this table, but contained elsewhere within this MIB module. The purpose of this string is to provid ...

a3ComVlanIfStatus

The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to a ...

a3ComVlanIfModeType

The VLAN mode type for this interface. This object can be set to: usedefault(1) open(2) closed(3) UseDefault Vlans: uses the bridge Vlan Mode value. The bridge Vlan Mode Value can be set to : Open, Closed or Mixed. Open VLANs: have no requirements about ...

a3ComIpVlanTable

A list of IP VLAN interface information entries. Entries in this table are related to entries in the a3ComVlanIfTable by using the same index.

a3ComIpVlanEntry

A a3ComIpVlanEntry contains layer 3 information about a particular IP VLAN interface. Note entries in this table cannot be deleted until the entries in the ifStackTable that produce overlap are removed.

a3ComIpVlanIpNetAddress

The IP network number for the IP VLAN interface defined in the a3ComVlanIfTable identified with the same index. The IpNetAdress and the IpNetMask must be set and the the row creation process completed by a NMS before overlapping rows in the ifStackTable c ...

a3ComIpVlanIpNetMask

The IP network mask corresponding to the IP Network address defined by a3ComIpVlanIpNetAddress. The IpNetAdress and the IpNetMask must be set and the row creation process completed by a NMS before overlapping rows in the ifStackTable can be created. Sets ...

a3ComIpVlanStatus

The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to at ...

a3ComVlanProtocolTable

This table lists the configured protocols per Vlan. A single entry exists in this list for each protocol configured on a VLAN interface. The a3ComVlanIfType object in a3ComVlanIfTable has to be set to vlanLayeredProtocols in order to use this table.

a3ComVlanProtocolEntry

A a3ComVlanProtocolEntry contains a single VLAN to protocol entry.

a3ComVlanProtocolIfIndex

The first indice of this row and the vlan's ifIndex in the ifTable. The value of this object is the same as the corresponding a3ComVlanIfIndex in the a3ComVlanTable.

a3ComVlanProtocolIndex

The second indice of this row, which identifies one of possible many protocols associated with the VLAN interface identified by this entries first indice. The values are based on the layer 3 protocols specified in A3ComVlanType

a3ComVlanProtocolStatus

The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to a ...

a3ComVlanEncapsIfTable

This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed.

a3ComVlanEncapsIfEntry

An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the a3ComNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does n ...

a3ComVlanEncapsIfIndex

The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the a3ComNextAvailableVirtIfIndex object.

a3ComVlanEncapsIfType

The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.

a3ComVlanEncapsIfTag

The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.

a3ComVlanEncapsIfStatus

The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set a3ComVlanE ...

a3ComNextAvailableVirtIfIndex

The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an age ...