HC-ALARM-MIB

HC-ALARM-MIB Download

MIBs list

This module defines Remote Monitoring MIB extensions for High Capacity Alarms.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for HC-ALARM-MIB

hcAlarmTable
A list of entries for the configuration of high capacity alarms.
hcAlarmEntry
A conceptual row in the hcAlarmTable. Entries are usually created in this table by management application action, but may also be created by agent action as well.
hcAlarmIndex
An arbitrary integer index value used to uniquely identify this high capacity alarm entry.
hcAlarmInterval
The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled var ...
hcAlarmVariable
The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated e ...
hcAlarmSampleType
The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of t ...
hcAlarmAbsValue
The absolute value (i.e., unsigned value) of the hcAlarmVariable statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. To obtain the true value for this sampling interv ...
hcAlarmValueStatus
This object indicates the validity and sign of the data for the hcAlarmAbsValue object, as described in the HcValueStatus textual convention.
hcAlarmStartupAlarm
The alarm that may be sent when this entry is first set to active. If the first sample after this entry becomes active is greater than or equal to the rising threshold and this object is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single r ...
hcAlarmRisingThreshAbsValueLo
The lower 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the hcAlarmRisingThreshAbsValueHi and hcAlarmRisingThresholdValStatus objects, as follows: ABS(thresh ...
hcAlarmRisingThreshAbsValueHi
The upper 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the hcAlarmRisingThreshAbsValueLo and hcAlarmRisingThresholdValStatus objects, as follows: ABS(thresh ...
hcAlarmRisingThresholdValStatus
This object indicates the sign of the data for the rising threshold, as defined by the hcAlarmRisingThresAbsValueLo and hcAlarmRisingThresAbsValueHi objects, as described in the HcValueStatus textual convention. The enumeration 'valueNotAvailable(1)' is n ...
hcAlarmFallingThreshAbsValueLo
The lower 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the hcAlarmFallingThreshAbsValueHi and hcAlarmFallingThresholdValStatus objects, as follows: ABS(thre ...
hcAlarmFallingThreshAbsValueHi
The upper 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the hcAlarmFallingThreshAbsValueLo and hcAlarmFallingThresholdValStatus objects, as follows: ABS(thre ...
hcAlarmFallingThresholdValStatus
This object indicates the sign of the data for the falling threshold, as defined by the hcAlarmFallingThreshAbsValueLo and hcAlarmFallingThreshAbsValueHi objects, as described in the HcValueStatus textual convention. The enumeration 'valueNotAvailable(1)' ...
hcAlarmRisingEventIndex
The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the ev ...
hcAlarmFallingEventIndex
The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the e ...
hcAlarmValueFailedAttempts
The number of times the associated hcAlarmVariable instance was polled on behalf of this hcAlarmEntry, (while in the active state) and the value was not available. This counter may experience a discontinuity if the agent restarts, indicated by the value ...
hcAlarmOwner
The entity that configured this entry and is therefore using the resources assigned to it.
hcAlarmStorageType
The type of non-volatile storage configured for this entry. If this object is equal to 'permanent(4)', then the associated hcAlarmRisingEventIndex and hcAlarmFallingEventIndex objects must be writable.
hcAlarmStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The hcAlarmStatus object may be modified if the associated inst ...
hcAlarmCapabilities
An indication of the high capacity alarm capabilities supported by this agent. If the 'hcAlarmCreation' BIT is set, then this agent allows NMS applications to create entries in the hcAlarmTable. If the 'hcAlarmNvStorage' BIT is set, then this agent allows ...
hcAlarmControlGroup
A collection of objects used to configure entries for high capacity alarm threshold monitoring purposes.
hcAlarmCapabilitiesGroup
A collection of objects used to indicate an agent's high capacity alarm threshold monitoring capabilities.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list