INTEL-NIC-MIB Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Dell Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for INTEL-NIC-MIB
- intelComponentIDTable
- This groupis required.
- intelComponentIDEntry
- This groupis required.
- manufacturerAtt1
- Manufacturer of this system.
- productAtt2
- Product name for this system.
- versionAtt3
- Version number of this system.
- serialNumberAtt4
- Serial number for this system.
- installationAtt5
- The time and date when this component was installed.
- verifyAtt6
- A code that provides a level of verification that the component is still installed and working.
- intelNetworkAdapterDriverTable
- ::= { intelnic 4 } SYNTAX SintelNetworkAdapterDriver ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelNetworkAdapterDriverState
- driverIndexAtt1
- interface to an ethernet-like medium.
- driverSoftwareNameAtt2
- REFERENCE "'Intel|Network Adapter Driver|001' 2
- driverSoftwareVersionAtt3
- REFERENCE "'Intel|Network Adapter Driver|001' 3
- driverSoftwareDescriptionAtt4
- REFERENCE "'Intel|Network Adapter Driver|001' 4
- driverSizeAtt5
- REFERENCE "'Intel|Network Adapter Driver|001' 5
- driverInterfaceTypeAtt6
- Driver interface type.
- driverInterfaceVersionAtt7
- Driver interface version.
- driverInterfaceDescriptionAtt8
- Description of the driver interface.
- intelNetworkAdapter802PortTable
- ::= { intelnic 5 } SYNTAX SintelNetworkAdapter802Port ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelNetworkAdapter802PortState
- portIndexAtt1
- interface to an ethernet-like medium.
- permanentNetworkAddressAtt2
- Permanent network address.
- currentNetworkAddressAtt3
- Current network address.
- connectorTypeAtt4
- Connector type.
- dataRateAtt5
- Data rate.
- totalPacketsTransmittedAtt6
- Total packets transmitted successfully.
- totalBytesTransmittedAtt7
- Total bytes transmitted successfully.
- totalPacketsReceivedAtt8
- Total packets received without errors.
- totalBytesReceivedAtt9
- Total bytes received without errors.
- totalTransmitErrorsAtt10
- Count of transmit errors.
- totalReceiveErrorsAtt11
- Count of receive errors.
- totalHostErrorsAtt12
- Count of host-side errors.
- totalWireErrorsAtt13
- Count of network-side errors.
- intelNetworkAdapterInstrumentationTable
- ::= { intelnic 6 } SYNTAX SintelNetworkAdapterInstrumentation ACCESS not-accessible STATUS mandatory DESCRIPTION "
- mIFIdAtt1
- REFERENCE "'Intel|Network Adapter Instrumentation|001' 1
- versionAtt2
- REFERENCE "'Intel|Network Adapter Instrumentation|001' 2
- intelDriverExtensionsGroupTable
- ::= { intelnic 7 } SYNTAX SintelDriverExtensionsGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelDriverExtensionsGroupState
- driverFilePathAtt1
- The file path of the adapter driver.
- driverFileDateAtt2
- Adapter driver file date.
- intelEtherLikeTable
- ::= { intelnic 8 } SYNTAX SintelEtherLike ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelEtherLikeState
- indexAtt1
- interface to an ethernet-like medium.
- alignmentErrorsAtt2
- interface that are not an integral number of octets in length and do not pass the FCS check.
- fcsErrorsAtt3
- interface that are an integral number of octets in length but do not pass the FCS check.
- singleCollisionFramesAtt4
- a particular interface for which transmission is inhibited by exactly one collision.
- multipleCollisionFramesAtt5
- a particular interface for which transmission is inhibited by more than one collision.
- sqeTestErrorsAtt6
- message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
- deferredTransmissionsAtt7
- transmission attempt on a particular interface is delayed because the medium is busy.
- lateCollisionsAtt8
- detected on a particular interface later than 512 bit-times into the transmission of a packet.
- excessiveCollisionsAtt9
- particular interface fails due to excessive collisions.
- internalMacTransmitErrorsAtt10
- particular interface fails due to an internal MAC sublayer transmit error.
- carrierSenseErrorsAtt11
- condition was lost or never asserted when attempting to transmit a frame on a particular interface.
- frameTooLongAtt12
- interface that exceed the maximum permitted frame size.
- internalMacReceiveErrorsAtt13
- particular interface fails due to an internal MAC sublayer receive error.
- etherChipSetAtt14
- Of the chipset used to realize the interface.
- intelVLANGroupTable
- ::= { intelnic 9 } SYNTAX SintelVLANGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelVLANGroupState
- vLANIdAtt1
- REFERENCE "'Intel|VLAN Group|001' 1
- vLANNameAtt2
- REFERENCE "'Intel|VLAN Group|001' 2
- typeOfVLANAtt3
- REFERENCE "'Intel|VLAN Group|001' 3
- intelNICHEALTHTable
- Events.
- intelNICHEALTHEntry
- Events.
- intelNICHEALTHState
- eventTypeAtt1
- The type of event that has occurred.
- deviceNumberAtt2
- REFERENCE "'Intel|NIC_HEALTH|001' 2
- eventSolutionAtt3
- A solution to the problem that caused the event.
- deviceInstanceAtt4
- Name of the instance of the Device
- intelTeamingEventsGroupTable
- Events.
- intelTeamingEventsGroupEntry
- Events.
- intelTeamingEventsGroupState
- teamIDAtt1
- The ID of the team.
- eventTypeAtt2
- The type of event that has occurred.
- teamModeAtt3
- The configuration mode of the team
- teamSizeAtt4
- Total number of adapters in the team
- intelTeamingGroupTable
- Team.
- intelTeamingGroupEntry
- Team.
- intelTeamingGroupState
- teamModeAtt2
- The configuration mode of the team
- teamSizeAtt3
- Total number of adapters in the team
- currentPrimaryAdapterAtt4
- ID of the current Primary member of the Team
- originalPrimaryAdapterAtt5
- reset.
- preferredPrimaryAdapterAtt6
- the team.This may be NULL if not set.
- intelTeamingMemberGroupTable
- member.
- intelTeamingMemberGroupEntry
- member.
- intelTeamingMemberGroupState
- boardTypeAtt1
- The board type of this adapter.
- adapterStatusAtt2
- The current status of the adapter.
- adapterFunctionAtt3
- The current role played by the adapter in the team.
- adapterIDAtt4
- ID of the adapter.
- permanentMACAddressAtt5
- The permanent MAC address as stored in the EEPROM.
- currentMACAddressAtt6
- canchange etc.
- intelFCTCOGroupTable
- ::= { intelnic 14 } SYNTAX SintelFCTCOGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "
- intelFCTCOGroupState
- flowControlTxPauseAtt2
- Number of Flow Control frames transmitted by the device.
- flowControlRxPauseAtt3
- Number of Flow Control frames received by the device.
- flowControlRxUnsupportedAtt4
- Number of MAC Control frames received by the device that are not Flow Control Pause frames.
- transmitTCOFramesAtt5
- Number of TCO frames transmitted.
- receiveTCOFramesAtt6
- Number of TCO frames received.
- intelNICHEALTHEvSys
- The major functional aspect of the product causing the fault.
- intelNICHEALTHEvSub
- The minor functional aspect of the product causing the fault.
- intelTeamingEventsGroupEvSys
- The major functional aspect of the product causing the fault.
- intelTeamingEventsGroupEvSub
- The minor functional aspect of the product causing the fault.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
