IP-LRRP-MIB Download
Cajun's Lucent Router Redundancy Protocol MIB
IPHost Network Monitor offer an easy way of SNMP monitoring your Avaya network devices.
OID list for IP-LRRP-MIB
- cjnLrrpEnabled
- Enable / Disable LRRP on this system.
- cjnLrrpGlobalStatsReset
- When set to the value enable (1) all VRRP statistics are reset to zero after which the value of this MIB object returns to disable(2)
- cjnLrrpRouterChecksumErrors
- The total number of LRRP packets received with an invalid LRRP checksum value.
- cjnLrrpRouterVersionErrors
- The total number of LRRP packets received with an unknown or unsupported version number.
- cjnLrrpRouterVrIdErrors
- The total number of LRRP packets received with an invalid VRID for this virtual router.
- cjnLrrpRouterStatsTable
- Table of virtual router statistics.
- cjnLrrpRouterStatsEntry
- An entry in the table, containing statistics information about a given virtual router.
- cjnLrrpStatsBecomeMaster
- The total number of times that this virtual router's state has transitioned to MASTER.
- cjnLrrpStatsAdvertiseRcvd
- The total number of LRRP advertisements received by this virtual router.
- cjnLrrpStatsAdvertiseIntervalErrors
- The total number of LRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.
- cjnLrrpStatsAuthFailures
- The total number of LRRP packets received that do not pass the authentication check.
- cjnLrrpStatsIpTtlErrors
- The total number of LRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255.
- cjnLrrpStatsPriorityZeroPktsRcvd
- The total number of LRRP packets received by the virtual router with a priority of '0'.
- cjnLrrpStatsPriorityZeroPktsSent
- The total number of LRRP packets sent by the virtual router with a priority of '0'.
- cjnLrrpStatsInvalidTypePktsRcvd
- The number of LRRP packets received by the virtual router with an invalid value in the 'type' field.
- cjnLrrpStatsAddressListErrors
- The total number of packets received for which the address list does not match the locally configured list for the virtual router.
- cjnLrrpStatsInvalidAuthType
- The total number of packets received with an unknown authentication type.
- cjnLrrpStatsAuthTypeMismatch
- The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`cjnLrrpOperAuthType').
- cjnLrrpStatsPacketLengthErrors
- The total number of packets received with a packet length less than the length of the LRRP header.
- cjnLrrpOperTable
- Operations table for a LRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'cjnLrrpOperEntry' items.
- cjnLrrpOperEntry
- An entry in the cjnLrrpOperTable containing the operational characteristics of a virtual router. On a LRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `cj ...
- cjnLrrpOperVrId
- This object contains the Virtual Router Identifier (VRID).
- cjnLrrpOperVirtualMacAddr
- The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-
. Where the first three octets consist of the IANA's OUI; The next two octets indicate the address block of the LRRP protocol; and the remaining octets consist ... - cjnLrrpOperState
- The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the ...
- cjnLrrpOperAdminState
- This object will enable/disable the virtual router function. Setting the value to 'up', will transition the state of the virtual router from `initialize' to `backup' or `master'; setting the value to `down', will transition the router from `master' or `ba ...
- cjnLrrpOperPriority
- This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to particpate ...
- cjnLrrpOperIpAddrCount
- The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the cjnLrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.
- cjnLrrpOperMasterIpAddr
- The master router's real (primary) IP address. This is the IP address listed as the source in LRRP advertisement last received by this virtual router.
- cjnLrrpOperPrimaryIpAddr
- In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `cjnLrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0 ...
- cjnLrrpOperAuthType
- Authentication type used for LRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex.
- cjnLrrpOperAuthKey
- The Authentication Key. This object is set according to the value of the 'cjnLrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 oct ...
- cjnLrrpOperAdvertisementInterval
- The time interval, in seconds, between sending advertisement messages. Only the master router sends LRRP advertisements.
- cjnLrrpOperPreemptMode
- Controls whether a higher priority virtual router will preempt a lower priority master.
- cjnLrrpOperVirtualRouterUpTime
- This is the value of the `sysUpTime' object when this virtual router (i.e., the `cjnLrrpOperState') transitioned out of `initialized'.
- cjnLrrpOperProtocol
- The particular protocol being controlled by this Virtual Router.
- cjnLrrpOperOverrideAddressOwner
- Enable/Disable LRRP override IP address owner on this system. When set to true (1), this system will respond to ping requests, telnet requests, etc., for all configured virtual IP addresses when this system is in MASTER VRRP state.
- cjnLrrpOperRowStatus
- The row status variable, used in accordance to installation and removal conventions for conceptual rows. In the text that follows, the characteristics (i.e., whether readable, settable or both) of each value are indicated in parenthesis. The state that th ...
- cjnLrrpAssoIpAddrTable
- The table of addresses associated with this virtual router.
- cjnLrrpAssoIpAddrEntry
- An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'cjnLrrpOperIpAd ...
- cjnLrrpAssoIpAddr
- The assigned IP addresses that a virtual router is responsible for backing up.
- cjnLrrpAssoIpAddrRowStatus
- The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to `active' or 'createAndGo' results in the addition of an associated address for a virtual router. Destroying the entry or setting it ...
