IPX-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the IPX-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the IPX-MIB .

OID list for IPX-MIB

ipxBasicSysTable: The IPX System table - basic information.
ipxBasicSysEntry: on the system.
ipxBasicSysInstance: row corresponds. This value may be written only when creating a new entry in the table.
ipxBasicSysExistState: Setting this field to off indicates that this entry may be deleted from the system table at the IPX implementation's discretion.
ipxBasicSysNetNumber: system.
ipxBasicSysNode: system.
ipxBasicSysName: The readable name for this system.
ipxBasicSysInReceives: those received in error.
ipxBasicSysInHdrErrors: their headers, including any IPX packet with a size less than the minimum of 30 bytes.
ipxBasicSysInUnknownSockets: destination socket was not open.
ipxBasicSysInDiscards: reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards.
ipxBasicSysInBadChecksums: checksums.
ipxBasicSysInDelivers: including packets from local applications.
ipxBasicSysNoRoutes: found.
ipxBasicSysOutRequests: transmission, not including any packets counted in ipxAdvForwPackets.
ipxBasicSysOutMalformedRequests: errors in their structure.
ipxBasicSysOutDiscards: reasons other than those accounted for in ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered, and ipxAdvSysOutCompressDiscards.
ipxBasicSysOutPackets: The total number of IPX packets transmitted.
ipxBasicSysConfigSockets: open at one time.
ipxBasicSysOpenSocketFails: The number of IPX socket open calls which failed.
ipxAdvSysTable: The IPX System table - advanced information.
ipxAdvSysEntry: on the system.
ipxAdvSysInstance: row corresponds. This value may be written only when creating a new entry in the table.
ipxAdvSysMaxPathSplits: value which this instance of the IPX may split between when forwarding packets.
ipxAdvSysMaxHops: The maximum number of hops a packet may take.
ipxAdvSysInTooManyHops: maximum hop count.
ipxAdvSysInFiltered: filtering.
ipxAdvSysInCompressDiscards: decompression errors.
ipxAdvSysNETBIOSPackets: The number of NETBIOS packets received.
ipxAdvSysForwPackets: The number of IPX packets forwarded.
ipxAdvSysOutFiltered: filtering.
ipxAdvSysOutCompressDiscards: compression errors.
ipxAdvSysCircCount: The number of circuits known to this instance of IPX.
ipxAdvSysDestCount: this instance of IPX.
ipxAdvSysServCount: The number of services known to this instance of IPX.
ipxCircTable: The Circuit table.
ipxCircEntry: system.
ipxCircSysInstance: to which this entry corresponds. This value may be written only when creating a new entry in the table.
ipxCircIndex: instance of IPX. This value may be written only when creating a new entry in the table.
ipxCircExistState: value set to off may be deleted from the table at the IPX implementation's discretion.
ipxCircOperState: The operational state of the circuit.
ipxCircIfIndex: circuit. This value may be written only when creating a new entry in the table.
ipxCircName: The readable name for the circuit.
ipxCircType: The type of the circuit.
ipxCircDialName: used to create this circuit. This value may be written only when creating a new entry in the table.
ipxCircLocalMaxPacketSize: system supports locally on this circuit.
ipxCircCompressState: be written only when creating a new entry in the table.
ipxCircCompressSlots: circuit. This value may be written only when creating a new entry in the table.
ipxCircStaticStatus: and services reached via this circuit matches that saved in permanent storage (current). Setting the value to write when it had the value changed will write the currently in use information to permanent storage, if supported. Setting the value to read w ...
ipxCircCompressedSent: The number of compressed packets sent.
ipxCircCompressedInitSent: The number of compression initialization packets sent.
ipxCircCompressedRejectsSent: The number of compressed packet rejected packets sent.
ipxCircUncompressedSent: even though compression was turned on for this circuit.
ipxCircCompressedReceived: The number of compressed packets received.
ipxCircCompressedInitReceived: The number of compression initialization packets received.
ipxCircCompressedRejectsReceived: The number of compressed packet rejected packets received.
ipxCircUncompressedReceived: compressed even though compression was turned on for this circuit.
ipxCircMediaType: The media type used on this circuit.
ipxCircNetNumber: be written only when creating a new entry in the table.
ipxCircStateChanges: The number of times the circuit has changed state.
ipxCircInitFails: circuit has failed.
ipxCircDelay: transmit one byte of data, excluding protocol headers, to a destination on the other end of the circuit, if the circuit is free of other traffic.
ipxCircThroughput: through the circuit if there is no other traffic.
ipxCircNeighRouterName: The name of the neighboring router on a WAN circuit.
ipxCircNeighInternalNetNum: on a WAN circuit.
ipxDestTable: known destinations.
ipxDestEntry: Each entry corresponds to one destination.
ipxDestSysInstance: to which this row corresponds.
ipxDestNetNum: The IPX network number of the destination.
ipxDestProtocol: destination was obtained.
ipxDestTicks: The delay in ticks to reach this destination.
ipxDestHopCount: The number of hops necessary to reach the destination.
ipxDestNextHopCircIndex: next hop.
ipxDestNextHopNICAddress: The NIC address of the next hop.
ipxDestNextHopNetNum: The IPX network number of the next hop.
ipxStaticRouteTable: destinations reached via statically configured routes.
ipxStaticRouteEntry: Each entry corresponds to one static route.
ipxStaticRouteSysInstance: which this row corresponds.
ipxStaticRouteCircIndex: reach the first hop in the static route.
ipxStaticRouteNetNum: The IPX network number of the route's destination.
ipxStaticRouteExistState: value set to off may be deleted from the table at the implementation's discretion.
ipxStaticRouteTicks: The delay, in ticks, to reach the route's destination.
ipxStaticRouteHopCount: The number of hops necessary to reach the destination.
ipxServTable: The table of services, indexed by name and type.
ipxServEntry: Each entry corresponds to one service.
ipxServSysInstance: to which this entry corresponds.
ipxServType: The service type.
ipxServName: The service name.
ipxServProtocol: obtained.
ipxServNetNum: service.
ipxServNode: The node portion of the IPX address of the service.
ipxServSocket: The socket portion of the IPX address of the service.
ipxServHopCount: The number of hops to the service.
ipxDestServTable: and type.
ipxDestServEntry: Each entry corresponds to one service.
ipxDestServSysInstance: to which this entry corresponds.
ipxDestServNetNum: service.
ipxDestServNode: The node portion of the IPX address of the service.
ipxDestServSocket: The socket portion of the IPX address of the service.
ipxDestServName: The service name.
ipxDestServType: The service type.
ipxDestServProtocol: obtained.
ipxDestServHopCount: The number of hops to the service.
ipxStaticServTable: all services reached via statically configured routes.
ipxStaticServEntry: Each entry corresponds to one service.
ipxStaticServSysInstance: this entry corresponds.
ipxStaticServCircIndex: The circuit used to reach this service.
ipxStaticServName: The service name.
ipxStaticServType: The service type.
ipxStaticServExistState: value set to off may be deleted from the table at the implementation's discretion.
ipxStaticServNetNum: service.
ipxStaticServNode: The node portion of the IPX address of the service.
ipxStaticServSocket: The socket portion of the IPX address of the service.
ipxStaticServHopCount: The number of hops to the service.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list