JNX-L2TP-MIB Download

jnxL2tpStatsTotalTunnels

This object returns the total number of tunnels that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsTotalSessions

This object returns the total number of sessions that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsControlRxOctets

This object returns the number of control channel octets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsControlRxPkts

This object returns the number of control packets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsControlTxOctets

This object returns the number of control channel octets that were transmitted to the existing tunnel endpoints. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying ...

jnxL2tpStatsControlTxPkts

This object returns the number of control packets that were transmitted to the existing tunnel endpoints.This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsPayloadRxOctets

This object returns the number of payload channel octets that were received on the exisiting tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsPayloadRxPkts

This object returns the number of payload packets that were received on the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsPayloadTxOctets

This object returns the number of payload channel octets that were transmitted to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsPayloadTxPkts

This object returns the number of payload packets that were transmitted to existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsErrorTxPkts

This object returns the number of errored packet transmission attempts to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpStatsErrorRxPkts

This object returns the number of errored packets that were received from the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.

jnxL2tpTunnelGroupStatsTable

The L2TP tunnel group status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel group.

jnxL2tpTunnelGroupStatsEntry

An L2TP tunnel group stats entry.

jnxL2tpTunnelGroupStatsTnlGrpName

This object contains the name of this tunnel group.

jnxL2tpTunnelGroupStatsGatewayAddrType

This object contains the type of local IP address for L2TP tunnels that are part of this group.

jnxL2tpTunnelGroupStatsGatewayAddr

This object contains the local IP address for L2TP tunnels that are part of this group.

jnxL2tpTunnelGroupStatsSvcIntfName

This object contains the name of the service interface that is hosting this tunnel group.

jnxL2tpTunnelGroupStatsTotalTunnels

This object returns the total number of tunnels that are currently in the established state in this tunnel group.

jnxL2tpTunnelGroupStatsTotalSessions

This object returns the total number of sessions that are currently in the established state in this tunnel group.

jnxL2tpTunnelStatsTable

The L2TP tunnel status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel.

jnxL2tpTunnelStatsEntry

An L2TP tunnel interface stats entry.

jnxL2tpTunnelStatsLocalTID

This object contains the local tunnel Identifier.

jnxL2tpTunnelStatsServiceInterface

This object contains the name of the service interface on which this tunnel is being hosted.

jnxL2tpTunnelStatsTunnelGroup

This object contains the name of the tunnel group that this tunnel is part of.

jnxL2tpTunnelStatsRemoteTID

This object contains the remote tunnel Identifier.

jnxL2tpTunnelStatsRemoteIpAddrType

This object contains the type of the remote end address of this tunnel.

jnxL2tpTunnelStatsRemoteIpAddress

This object contains the remote end address of this tunnel.

jnxL2tpTunnelStatsRemoteUdpPort

This object contains the remote end UDP port of this tunnel.

jnxL2tpTunnelStatsActiveSessions

This object contains the total number of sessions in the established state for this tunnel.

jnxL2tpTunnelStatsState

This field contains the current state of the control tunnel - one of the internal tunnel state names as described below: cc_responder_accept_new The tunnel has received and accepted the start control connection request (SCCRQ) cc_responder_reject_new The ...

jnxL2tpTunnelStatsLocalIpAddrType

This object contains the type of the local end address of this tunnel.

jnxL2tpTunnelStatsLocalIpAddress

This object contains the local end address of this tunnel.

jnxL2tpTunnelStatsLocalUdpPort

This object contains the local end UDP port of this tunnel.

jnxL2tpTunnelStatsLocalHostName

This object contains the local host name of this tunnel.

jnxL2tpTunnelStatsRemoteHostName

This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected.

jnxL2tpTunnelMaxSessions

This object represents the maximum number of sessions configured on this tunnel. It could be any positive number or unlimited (0).

jnxL2tpTunnelStatsWindowSize

This object contains the send window size for this tunnel.

jnxL2tpTunnelStatsHelloInterval

This object contains the hello interval for this tunnel.

jnxL2tpTunnelStatsCreationTime

This object represents the time of creation of this tunnel.

jnxL2tpTunnelStatsUpTime

This object represents the time elapsed since this tunnel was established.

jnxL2tpTunnelStatsIdleTime

This object represents the time elapsed since this tunnel had last data activity (transmission or reception).

jnxL2tpTunnelStatsCollectionStart

This object represents the time at which the statistics gathering started for this tunnel.

jnxL2tpTunnelStatsControlTxPkts

This object contains the number of control packets that were transmitted to the tunnel peer.

jnxL2tpTunnelStatsControlTxBytes

This object contains the number of control bytes that were transmitted to the tunnel peer.

jnxL2tpTunnelStatsControlRxPkts

This object contains the number of control packets received on the tunnel.

jnxL2tpTunnelStatsControlRxBytes

This object contains the number of control bytes that were received from the tunnel peer.

jnxL2tpTunnelStatsDataTxPkts

This object contains the number of data packets transmitted to the tunnel.

jnxL2tpTunnelStatsDataTxBytes

This object contains the number of data bytes that were transmitted to the tunnel peer.

jnxL2tpTunnelStatsDataRxPkts

This object contains the number of data packets received from this tunnel.

jnxL2tpTunnelStatsDataRxBytes

This object contains the number of data bytes that were received from the tunnel peer.

jnxL2tpTunnelStatsErrorTxPkts

This object contains the number of error transmit packets on the tunnel.

jnxL2tpTunnelStatsErrorRxPkts

This object contains the number of error receive packets on the tunnel.

jnxL2tpSessionStatsTable

The L2TP session status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled session.

jnxL2tpSessionStatsEntry

An L2TP session interface stats entry.

jnxL2tpSessionStatsLocalTID

This object contains the local tunnel Identifier.

jnxL2tpSessionStatsLocalSID

This object contains the local session Identifier.

jnxL2tpSessionStatsServiceInterface

This object contains the name of the service interface on which this session is being hosted.

jnxL2tpSessionStatsTunnelGroup

This object contains the name of the tunnel group that this session is part of.

jnxL2tpSessionStatsRemoteSID

This object contains the remote end assigned session identifier for this session. When a session is starting this value may be zero until the remote tunnel endpoint has responded.

jnxL2tpSessionStatsInterfaceUnit

This object contains the interface unit number corresponding to the logical service interface on which the session is being hosted.

jnxL2tpSessionStatsEncapType

This object contains the tunnel encapsulation type.

jnxL2tpSessionStatsBundleID

This object identifies the bundle that this session is a link of. This field is valid only for tunnel encapsulation type multilink-ppp.

jnxL2tpSessionStatsState

This field contains the current state of the session - one of the internal session related state names as described below: established The session is operating closed The session is being closed destroyed The session is being destroyed cleanup The session ...

jnxL2tpSessionStatsUserName

This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.

jnxL2tpSessionStatsMode

This object identifies the configured mode value for this session.

jnxL2tpSessionStatsLocalAddrType

This object contains the type of the local end address of the tunnel that is hosting this session.

jnxL2tpSessionStatsLocalAddress

This object contains the local end address of the tunnel that is hosting this session.

jnxL2tpSessionStatsLocalUdpPort

This object contains the UDP port of the local end of the tunnel that is hosting this session.

jnxL2tpSessionStatsRemoteAddrType

This object contains the type of the remote end address of the tunnel hosting this session.

jnxL2tpSessionStatsRemoteAddress

This object contains the remote end address of the tunnel hosting this session.

jnxL2tpSessionStatsRemoteUdpPort

This object contains the UDP port of the remote end of the tunnel hosting this session.

jnxL2tpSessionStatsLocalHostName

This object contains the local host name of the tunnel that is hosting this session.

jnxL2tpSessionStatsRemoteHostName

This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer.

jnxL2tpSessionAssignedIpAddrType

This object contains the type of IP address of PPP client being tunneled as obtained from IPCP configuration during session establishment.

jnxL2tpSessionAssignedIpAddress

This object contains the IP address of the PPP client being tunneled as obtained from IPCP configuration during session establishment.

jnxL2tpSessionLocalMRU

The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to this session.

jnxL2tpSessionRemoteMRU

The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP client.

jnxL2tpSessionStatsTxSpeed

This object returns the last known transmit baud rate for this session.

jnxL2tpSessionStatsRxSpeed

This object returns the last known receive baud rate for this session established.

jnxL2tpSessionStatsCallBearerType

This object describes the bearer type of this session.

jnxL2tpSessionStatsFramingType

This object describes the framing type of this session.

jnxL2tpSessionStatsLCPRenegotiation

This object returns whether LCP renegotiation is on or off for this session.

jnxL2tpSessionStatsAuthMethod

This object contains the proxy authentication method employed by the LAC for the session.

jnxL2tpSessionStatsNasIpAddrType

This object contains the type of IP address of the RADIUS network address server to which the accounting records for this session are being sent to.

jnxL2tpSessionStatsNasIpAddress

This object contains the IP address of the RADIUS network address server to which the accounting records for this session are being sent to.

jnxL2tpSessionStatsNasIpPort

This object contains the port on which RADIUS network address server accounting messages will be sent.

jnxL2tpSessionStatsFramedProtocol

This object contains the frame protocol attribute obtained from RADIUS server for this session.

jnxL2tpSessionStatsFramedIpAddrType

This Attribute indicates the type of address to be configured for the user, as provided by the RADIUS server in response to authentication request.

jnxL2tpSessionStatsFramedIpAddress

This Attribute indicates the address to be configured for the user, as provided by the RADIUS server in response to authentication request.

jnxL2tpSessionStatsCallingStationID

This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the call came from, using Automatic Number Identification (ANI) or similar technology. It is only used in Access-Request packets.

jnxL2tpSessionStatsCalledStationID

This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the user called, using Dialed Number Identification (DNIS) or similar technology. It is only used in Access-Request packets.

jnxL2tpSessionStatsAcctDelayTime

This attribute indicates how many seconds the RADIUS accounting client has been trying to send a record for, and can be subtracted from the time of arrival on the server to find the approximate time of the event generating this Accounting-Request.

jnxL2tpSessionStatsAcctSessionID

This attribute is a unique Accounting ID to make it easy to match start and stop records in a log file.

jnxL2tpSessionStatsAcctMethod

This object contains the accounting method employed for this session.

jnxL2tpSessionStatsAcctSessionTime

This attribute indicates how many seconds the user has received service for.

jnxL2tpSessionStatsAcctNasPortType

This Attribute indicates the type of the physical port of the NAS which is performing accounting for the user.

jnxL2tpSessionStatsAcctTnlClientEndPoint

This object contains the remote tunnel Identifier of the tunnel hosting this session.

jnxL2tpSessionStatsAcctTnlServerEndPoint

This object contains the local tunnel Identifier of the tunnel hosting this session.

jnxL2tpSessionStatsAcctTnlClientAuthID

This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer, for the tunnel that is hosting this session.

jnxL2tpSessionStatsAcctTnlServerAuthID

This object contains the local host name of the tunnel that is hosting this session.

jnxL2tpSessionStatsUserProfileName

This object contains the configured access profile name that is being used for this session.

jnxL2tpSessionStatsInterfaceID

This object contains the interface identification (name) for the session bearing service interface.

jnxL2tpSessionStatsCallSerialNumber

This object contains the serial number that has been assigned to this session.

jnxL2tpSessionStatsCreationTime

This object represents the time of creation of this session.

jnxL2tpSessionStatsUpTime

This object represents the time elapsed since this session was established.

jnxL2tpSessionStatsIdleTime

This object represents the time elapsed since this session had last data activity (transmission or reception).

jnxL2tpSessionStatsCollectionStart

This object represents the time at which the statistics gathering started for this session.

jnxL2tpSessionStatsControlTxPkts

This object contains the number of control packets that were transmitted to the session peer.

jnxL2tpSessionStatsControlTxBytes

This object contains the number of control bytes that were transmitted to the session peer.

jnxL2tpSessionStatsControlRxPkts

This object contains the number of control packets received on the session.

jnxL2tpSessionStatsControlRxBytes

This object contains the number of control bytes that were received from the session peer.

jnxL2tpSessionStatsDataTxPkts

This object contains the number of data packets transmitted to the remote session peer.

jnxL2tpSessionStatsDataTxBytes

This object contains the number of data bytes that were transmitted to the session peer.

jnxL2tpSessionStatsDataRxPkts

This object contains the number of data packets received on this session.

jnxL2tpSessionStatsDataRxBytes

This object contains the number of data bytes that were received from the session peer.

jnxL2tpSessionStatsErrorTxPkts

This object contains the number of error transmit packets on the session.

jnxL2tpSessionStatsErrorRxPkts

This object contains the number of error receive packets on the session.

jnxL2tpMlpppBundleStatsTable

The L2TP MLPPP bundle status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled multilink PPP bundle.

jnxL2tpMlpppBundleStatsEntry

An L2TP MLPPP bundle statistics entry.

jnxL2tpMlpppBundleStatsBundleID

This object identifies the session's associated bundle.

jnxL2tpMlpppBundleStatsNumLinks

This object identifies the current number of links that have joined the bundle.

jnxL2tpMlpppBundleStatsEndpoint

This object identifies the username of the MLPPP bundle.

jnxL2tpMlpppBundleStatsInputMrru

This object identifies the maximum packet size that the input inteface can process.

jnxL2tpMlpppBundleStatsOutputMrru

This object identifies the maximum packet size that the output interface can process.