JUNIPER-ATM-COS-MIB Download
The Juniper enterprise MIB for ATM COS (Class Of
Service) infrastructure. For detailed information on ATM
With the IPHost SNMP tool, you can monitor any SNMP objects of the
JUNIPER-ATM-COS-MIB
.
OID list for JUNIPER-ATM-COS-MIB
- jnxCosAtmVcTable
- A table of ATM VCs which have COS configured.
- jnxCosAtmVcEntry
- This entry contains COS info specific to an ATM VC. Each entry is indexed using ifIndex, vpi and vci of the VC.
- jnxCosAtmVcCosMode
- The mode of COS queue priority for the VC. strict mode : One queue of the four queues has strict high priority and is always serviced before the rest of the queues. The remaining queues are serviced in round robin fashion. alternate mode : One queue has h ...
- jnxCosAtmVcScTable
- A table of rows representing atm-scheduler config parameters for each forwarding class within a specified VC. NOTE: These schedulers are specific to an atm interface and are different from the typical schedulers specified under class-of-service config in ...
- jnxCosAtmVcScEntry
- This entry represents atm-scheduler config parameters per forwarding class and per VC.
- jnxCosAtmVcScPriority
- The atm-scheduler priority for the queue associated with the specified forwarding class within the specified VC.
- jnxCosAtmVcScTxWeightType
- The atm-scheduler transmit-weight-type for the queue associated with the specified forwarding class inside the specified VC. An atm-scheduler can specify the transmit-weight-type either as number of cells or as a percentage of the queue size.
- jnxCosAtmVcScTxWeight
- The atm-scheduler's transmit weight for the queue associated with the specified forwarding class and the specified VC. This object value is either expressed in units of cells or as a percentage of the total VC bandwidth. The unit (value-type) can be deter ...
- jnxCosAtmVcScDpType
- The type of RED drop profile configured for the specified forwarding class within the specified VC. A scheduler can specify either linear or constant drop profile. A constant type drop profile (aka EPD) specifies that when the number of queued cells excee ...
- jnxCosAtmVcScLrdpQueueDepth
- The maximum queue size in cells, as specified by the linear RED drop profile associated with the specified forwarding class within the specified VC. This object is valid only when value of object jnxCosAtmVcScDpType is 'linearRed(0)'.
- jnxCosAtmVcScLrdpLowPlpThresh
- The threshold percentage of fill-level beyond which low PLP (Packet Loss Priority) packets belonging to the specified forwarding class within the specified VC are randomly dropped. This value is specified by linear RED drop profile config. This object is ...
- jnxCosAtmVcScLrdpHighPlpThresh
- The threshold percentage of fill-level beyond which high PLP (Packet Loss Priority) packets belonging to the specified forwarding class within the specified VC are randomly dropped. This value is specified by linear RED drop profile config. This object is ...
- jnxCosAtmVcEpdThreshold
- If a EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells in the queue are dropped. This object has valid value only when jnxCosAtmVcScDpType is 'epd(1)'.
- jnxCosAtmVcQstatsTable
- A table of per VC and per forwarding class queue stats entries.
- jnxCosAtmVcQstatsEntry
- This entry contains queue stats for a specified forwarding class and specified VC.
- jnxCosAtmVcQstatsOutPackets
- The number of packets belonging to the specified forwarding class transmitted on the specified VC.
- jnxCosAtmVcQstatsOutBytes
- The number of bytes belonging to the specified forwarding class that were transmitted on the specified VC.
- jnxCosAtmVcQstatsOutRedDropPkts
- The number of outgoing packets on the specified VC and belonging to the specified forwarding class, that were RED-dropped.
- jnxCosAtmVcQstatsOutNonRedDrops
- The number of outgoing packets on the specified VC and belonging to the specified forwarding class, that were dropped not as a result of RED mechanism, but because of errors in packets.
- jnxCosAtmVcQstatsOutLpBytes
- The number of low PLP (PLP0) bytes transmitted.
- jnxCosAtmVcQstatsOutLpPkts
- The number of low PLP (PLP0) packets transmitted.
- jnxCosAtmVcQstatsOutLpDropBytes
- The number of low PLP (PLP0) bytes dropped at the output queue.
- jnxCosAtmVcQstatsOutHpDropBytes
- The number of high PLP (PLP1) bytes dropped at the output queue.
- jnxCosAtmVcQstatsOutLpDropPkts
- The number of low PLP (PLP0) packets dropped at the output queue.
- jnxCosAtmVcQstatsOutHpDropPkts
- The number of high PLP (PLP1) packets dropped at the output queue.
- jnxCosAtmTrunkTable
- A table of all ATM Trunk CoS entries. Stats and configuration information is provided for each ATM Trunk CoS interface.
- jnxCosAtmTrunkEntry
- A single ATM Trunk CoS Entry.
- jnxCosAtmTrunkMode
- The mode of COS queue priority for the Trunk. strict mode : One queue of the four queues has strict high priority and is always serviced before the rest of the queues. The remaining queues are serviced in round robin fashion. alternate mode : One queue ha ...
- jnxCosAtmTrunkScPriority
- The atm-scheduler priority for the queue associated with the specified forwarding class within the specified Trunk.
- jnxCosAtmTrunkScTxWeightType
- The atm-scheduler transmit-weight-type for the queue associated with the specified forwarding class inside the specified Trunk. An atm-scheduler can specify the transmit-weight-type either as number of cells or as a percentage of the queue size.
- jnxCosAtmTrunkScTxWeight
- The atm-scheduler's transmit weight for the queue associated with the specified forwarding class and the specified Trunk. This object value is either expressed in units of cells or as a percentage of the total Trunk bandwidth. The unit (value-type) can be ...
- jnxCosAtmTrunkQaType
- The atm queue admission type used for the specified Trunk.
- jnxCosAtmTrunkEpdThresholdPlp0
- If an EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells which have plp equal to 0 will be dropped. This object has valid value only when jnxCosAtmTrunkQaType is singleEpd o ...
- jnxCosAtmTrunkEpdThresholdPlp1
- If a EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells which have plp equal to 1 will be dropped. This object has valid value only when jnxCosAtmTrunkQaType is dualEpd.
- jnxCosAtmTrunkQstatsOutPackets
- The number of packets belonging to the specified forwarding class transmitted on the specified Trunk.
- jnxCosAtmTrunkQstatsOutBytes
- The number of bytes belonging to the specified forwarding class that were transmitted on the specified Trunk.
- jnxCosAtmTrunkQstatsOutDrops
- The number of outgoing packets on the specified Trunk and belonging to the specified forwarding class, that were dropped.
- jnxCosAtmTrunkQstatsOutLpBytes
- The number of low PLP (PLP0) bytes transmitted.
- jnxCosAtmTrunkQstatsOutLpPkts
- The number of low PLP (PLP0) packets transmitted.
- jnxCosAtmTrunkQstatsOutLpDropBytes
- The number of low PLP (PLP0) bytes dropped at the output queue.
- jnxCosAtmTrunkQstatsOutHpDropBytes
- The number of high PLP (PLP1) bytes dropped at the output queue.
- jnxCosAtmTrunkQstatsOutLpDropPkts
- The number of low PLP (PLP0) packets dropped at the output queue.
- jnxCosAtmTrunkQstatsOutHpDropPkts
- The number of high PLP (PLP1) packets dropped at the output queue.
- jnxCosAtmTrunkQstatsOutHpBytes
- The number of high PLP (PLP1) bytes transmitted.
- jnxCosAtmTrunkQstatsOutHpPkts
- The number of high PLP (PLP1) packets transmitted.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
