JUNIPER-MPLS-LDP-MIB Download

jnxMplsLdpLsrId

The LSR's Identifier.

jnxMplsLdpLsrLoopDetectionCapable

A indication of whether this Label Switching Router supports loop detection. none(1) -- Loop Detection is not supported on this LSR. other(2) -- Loop Detection is supported but by a method other than those listed below. hopCount(3) -- Loop Detection is su ...

jnxMplsLdpEntityLastChange

The value of sysUpTime at the time of the most recent addition or deletion of an entry to the jnxMplsLdpEntityTable/jnxMplsLdpEntityStatsTable. If no such changes have occurred since the last re-initialization of the local management subsystem, then this ...

jnxMplsLdpEntityIndexNext

This object contains an appropriate value to be used for jnxMplsLdpEntityIndex when creating entries in the jnxMplsLdpEntityTable. The value 0 indicates that no unassigned entries are available. To obtain the jnxMplsLdpEntityIndex value for a new entry, t ...

jnxMplsLdpEntityTable

This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switching Router (LSR).

jnxMplsLdpEntityEntry

An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.

jnxMplsLdpEntityLdpId

The LDP identifier.

jnxMplsLdpEntityIndex

This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'jnxMplsLdpEntityIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this tabl ...

jnxMplsLdpEntityProtocolVersion

The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version of the LDP protocol is negotiated during session establishment. The value of this object rep ...

jnxMplsLdpEntityAdminStatus

The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all contact with that Peer is lost and all information from that Peer needs to ...

jnxMplsLdpEntityOperStatus

The operational status of this LDP Entity.

jnxMplsLdpEntityTcpDscPort

The TCP Discovery Port for LDP. The default value is the well-known value of this port.

jnxMplsLdpEntityUdpDscPort

The UDP Discovery Port for LDP. The default value is the well-known value for this port.

jnxMplsLdpEntityMaxPduLength

The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies the default maximum length of 4096 octets, this is why the value of this objec ...

jnxMplsLdpEntityKeepAliveHoldTimer

The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.

jnxMplsLdpEntityHelloHoldTimer

The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received from potential peers. This object represents the Hold Time in the Common Hello Parameters TL ...

jnxMplsLdpEntityInitSesThreshold

When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'jnxMplsLdpInitSesThresholdExceeded', when the number of Session Initialization messages sent exceeds this threshold. The notification i ...

jnxMplsLdpEntityLabelDistMethod

For any given LDP session, the method of label distribution must be specified.

jnxMplsLdpEntityLabelRetentionMode

The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a ...

jnxMplsLdpEntityPathVectorLimit

If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the ...

jnxMplsLdpEntityHopCountLimit

If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Detection using Hop Counters is enabled, and this object specifies this Entity's maximum allowable ...

jnxMplsLdpEntityTargetPeer

If this LDP entity uses targeted peer then set this to true.

jnxMplsLdpEntityTargetPeerAddrType

The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of jnxMplsLdpEntityTargetPeerAddr is to be interpreted.

jnxMplsLdpEntityTargetPeerAddr

The value of the internetwork layer address used for the Extended Discovery.

jnxMplsLdpEntityLabelType

Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization message associated with this Entity. If the value is atmParameters(2) then a row must be c ...

jnxMplsLdpEntityDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the specific instances associated with this entity of any Counter32, or Counter64 object contained i ...

jnxMplsLdpEntityStorageType

The storage type for this entry.

jnxMplsLdpEntityRowStatus

An object that allows entries in this table to be created and deleted using the RowStatus convention.

jnxMplsLdpEntityStatsTable

This table is a read-only table which augments the jnxMplsLdpEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR.

jnxMplsLdpEntityStatsEntry

A row in this table contains statistical information about an LDP Entity. Some counters contained in a row are for fatal errors received during a former LDP Session associated with this entry. For example, an Ldp Pdu received on a TCP connection during ...

jnxMplsLdpAttemptedSessions

A count of the total attempted sessions for this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of jnxMplsLdpEntityDiscontinuityTime.

jnxMplsLdpSesRejectedNoHelloErrors

A count of the Session Rejected/No Hello Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ...

jnxMplsLdpSesRejectedAdErrors

A count of the Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indi ...

jnxMplsLdpSesRejectedMaxPduErrors

A count of the Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicate ...

jnxMplsLdpSesRejectedLRErrors

A count of the Session Rejected/Parameters Label Range Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the ...

jnxMplsLdpBadLdpIdentifierErrors

This object counts the number of Bad LDP Identifier Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at ot ...

jnxMplsLdpBadPduLengthErrors

This object counts the number of Bad Pdu Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other ...

jnxMplsLdpBadMessageLengthErrors

This object counts the number of Bad Message Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at ot ...

jnxMplsLdpBadTlvLengthErrors

This object counts the number of Bad TLV Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other ...

jnxMplsLdpMalformedTlvValueErrors

This object counts the number of Malformed TLV Value Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at o ...

jnxMplsLdpKeepAliveTimerExpErrors

This object counts the number of Session Keep Alive Timer Expired Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, a ...

jnxMplsLdpShutdownNotifReceived

This object counts the number of Shutdown Notfications received related to session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other ti ...

jnxMplsLdpShutdownNotifSent

This object counts the number of Shutdown Notfications sent related to session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times ...

jnxMplsLdpPeerLastChange

The value of sysUpTime at the time of the most recent addition or deletion to the jnxMplsLdpPeerTable/jnxMplsLdpSessionTable.

jnxMplsLdpPeerTable

Information about LDP peers known by Entities in the jnxMplsLdpEntityTable. The information in this table is based on information from the Entity-Peer interaction during session initialization but is not appropriate for the jnxMplsLdpSessionTable, becaus ...

jnxMplsLdpPeerEntry

Information about a single Peer which is related to a Session. NOTE: this table is augmented by the jnxMplsLdpSessionTable.

jnxMplsLdpPeerLdpId

The LDP identifier of this LDP Peer.

jnxMplsLdpPeerLabelDistMethod

For any given LDP session, the method of label distribution must be specified.

jnxMplsLdpPeerPathVectorLimit

If the value of this object is 0 (zero) then Loop Dection for Path Vectors for this Peer is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors for this Peer is enabled and the Path Vector Limit is this v ...

jnxMplsLdpSessionTable

A table of Sessions between the LDP Entities and LDP Peers. Each row represents a single session.

jnxMplsLdpSessionEntry

An entry in this table represents information on a single session between an LDP Entity and LDP Peer. The information contained in a row is read-only. Please note: the Path Vector Limit for the Session is the value which is configured in the correspondin ...

jnxMplsLdpSesStateLastChange

The value of this object is sysUpTime when the most recent change in the jnxMplsLdpSesState object occurred. When the entry is created, then this object has the value of sysUpTime when the entry was created.

jnxMplsLdpSesState

The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.

jnxMplsLdpSesProtocolVersion

The version of the LDP Protocol which this session is using. This is the version of the LDP protocol which has been negotiated during session initialization.

jnxMplsLdpSesKeepAliveHoldTimeRem

The keep alive hold time remaining for this session.

jnxMplsLdpSesMaxPduLength

The value of maximum allowable length for LDP PDUs for this session. This value may have been negotiated during the Session Initialization. This object is related to the jnxMplsLdpEntityMaxPduLength object. The jnxMplsLdpEntityMaxPduLength object speci ...

jnxMplsLdpSesDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the specific instances associated with this session of any Counter32 or Counter64 object contained ...

jnxMplsLdpSesStatsTable

A table of statistics for Sessions between LDP Entities and LDP Peers.

jnxMplsLdpSesStatsEntry

An entry in this table represents statistical information on a single session between an LDP Entity and LDP Peer.

jnxMplsLdpSesStatsUnkMesTypeErrors

This object counts the number of Unknown Message Type Errors detected during this session. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of jnxMplsLdpSesD ...

jnxMplsLdpSesStatsUnkTlvErrors

This object counts the number of Unknown TLV Errors detected during this session. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of jnxMplsLdpSessionDiscon ...

jnxMplsLdpHelloAdjacencyTable

A table of Hello Adjacencies for Sessions.

jnxMplsLdpHelloAdjacencyEntry

Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.

jnxMplsLdpHelloAdjIndex

An identifier for this specific adjacency.

jnxMplsLdpHelloAdjHoldTimeRem

The time remaining for this Hello Adjacency. This interval will change when the 'next' Hello message which corresponds to this Hello Adjacency is received.

jnxMplsLdpHelloAdjType

This adjacency is the result of a 'link' hello if the value of this object is link(1). Otherwise, it is a result of a 'targeted' hello, targeted(2).

jnxMplsLdpLspTable

A table of LDP LSP's which map to a Segment Table in the the LSR MIB's (either the mplsInSegmentTable or mplsOutSegmentTable) AND to the LSR MIB's mplsXCTable.

jnxMplsLdpLspEntry

An entry in this table represents information on a single LDP LSP which is represented by a session's index triple (jnxMplsLdpEntityLdpId, jnxMplsLdpEntityIndex, jnxMplsLdpPeerLdpId) AND the index tuple (jnxMplsLdpLspIfIndex, jnxMplsLdpLspLabel). The info ...

jnxMplsLdpLspIfIndex

The ifIndex value associated with this LSP.

jnxMplsLdpLspLabel

The LDP label for this LSP.

jnxMplsLdpLspLabelType

The Layer 2 Label Type.

jnxMplsLdpLspType

The type of LSP connection. The possible values are: unknown(1) -- if the LSP is not known to be one of the following. terminatingLsp(2) -- if the LSP terminates on the LSR, then this is an ingressing LSP which ends on the LSR, originatingLsp(3 ...

jnxMplsLdpLspLsrInSegmentPointer

If this LSP terminates or is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the mplsLsrInSegmentTable. In other words if the value of jnxMplsLdpLspType is terminatingLsp(2) or crossConnectingLsp(4), then thi ...

jnxMplsLdpLspLsrOutSegmentPointer

If this LSP originates or is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the LSR-MIB's mplsOutSegmentTable. In other words if the value of jnxMplsLdpLspType is originatingLsp(3) or crossConnectingLsp(4), ...

jnxMplsLdpLspLsrXCPointer

If this LSP is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the LSR-MIB's mplsXCTable. In other words if the value of jnxMplsLdpLspType is crossConnectingLsp(4), then this should point to an instance of an ...

jnxMplsFecIndexNext

This object contains an appropriate value to be used for jnxMplsFecIndex when creating entries in the jnxMplsFecTable. The value 0 indicates that no unassigned entries are available. To obtain the jnxMplsFecIndex value for a new entry, the manager issues ...

jnxMplsFecTable

This table represents the FEC (Forwarding Equivalence Class) Information associated with an LSP.

jnxMplsFecEntry

Each row represents a single FEC Element.

jnxMplsFecIndex

The index which uniquely identifies this entry.

jnxMplsFecType

The type of the FEC. If the value of this object is 'prefix(1)' then the FEC type described by this row is for address prefixes. If the value of this object is 'hostAddress(2)' then the FEC type described by this row is a host address.

jnxMplsFecAddrLength

If the value of 'jnxMplsFecType' is 'prefix(1)' then the value of this object is the length in bits of the address prefix represented by 'jnxMplsFecAddr', or if the length is zero then this is a special value which indicates that the prefix matches all ad ...

jnxMplsFecAddrFamily

The value of this object is from the Address Family Numbers.

jnxMplsFecAddr

If the value of 'jnxMplsFecType' is 'prefix(1)' then the value of this object is the address prefix. If the value of the 'jnxMplsFecAddrLength' is object is zero, then this object should also be zero. If the value of the 'jnxMplsFecType' is 'hostAddress(2 ...

jnxMplsFecStorageType

The storage type for this entry.

jnxMplsFecRowStatus

An object that allows entries in this table to be created and deleted using the RowStatus convention.

jnxMplsLdpLspFecTable

A table which shows the relationship between LDP LSP's and FECs. Each row represents a single LSP to FEC association. This table is read-only.

jnxMplsLdpLspFecEntry

An entry represents a LDP LSP to FEC association.

jnxMplsLdpLspFecOperStatus

An indication of the operational status of the FEC associated with LDP LSP. unknown(1) - this is a temporary state which may indicate the LSP-FEC association is in a state of transition. inUse(2) - the FEC associated with the LSP is currently being applie ...

jnxMplsLdpLspFecLastChange

This value of sysUpTime when the jnxMplsLdpLspFecOperStatus last changed state.

jnxMplsLdpLspFecRowStatus

An object that allows entries in this table to be created and deleted using the RowStatus convention.

jnxMplsLdpSesPeerAddrTable

This table 'extends' the jnxMplsLdpSessionTable. This table is used to store Label Address Information from Label Address Messages received by this LSR from Peers. This table is read-only and should be updated when Label Withdraw Address Messages are rec ...

jnxMplsLdpSesPeerAddrEntry

An entry in this table represents information on session's for a single next hop address which was advertised in an Address Message from the LDP peer. The information contained in a row is read-only.

jnxMplsLdpSesPeerAddrIndex

An index which uniquely identifies this entry within a given session.

jnxMplsLdpSesPeerNextHopAddrType

The internetwork layer address type of this Next Hop Address as specified in the Label Address Message associated with this Session. The value of this object indicates how to interpret the value of jnxMplsLdpSessionPeerNextHopAddress.

jnxMplsLdpSesPeerNextHopAddr

The value of the next hop address.

jnxMplsLdpGeneralGroup

Objects that apply to all MPLS LDP implementations.

jnxMplsLdpLspGroup

These objects are specific to LDP LSPs.

jnxMplsLdpLsrGroup

These objects are optional and only need to be supported for LDP implementations which support the following tables in the LSR MIB: mplsInSegmentTable, mplsOutSegmentTable and mplsXCTable.