LOAD-BAL-SYSTEM-MIB Download
A private enterprise mib for ip load balancing systems
IPHost Network Monitor offer an easy way of SNMP monitoring your F5 Network Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for LOAD-BAL-SYSTEM-MIB
- interfaceNumber
- The number of interfaces on this BIG/ip.
- interfaceTable
- A table containing information about the BIG/ip intefaces.
- interfaceEntry
- Columns in the Interface Table.
- interfaceName
- The name of the interface.
- interfaceIpAddresses
- The list of IP addresses on this interface.
- interfaceDestination
- This is a destination interface.
- interfaceSource
- This is a source interface.
- interfaceTimeout
- The seconds before a failover is triggered in failsafe mode.
- interfaceArmed
- The interface will be armed if the interface failsafe mode is activated.
- interfaceVLANSEnabled
- Is VLANS enabled for this interface.
- interfaceMasqueradeAddress
- MAC masquerade address of this interface.
- interfaceLastTimeChanged
- The last time the interface attributes were modified.
- interfaceSpeed
- The speed of this interface.
- interfaceFullDuplex
- Is this interface operating in full duplex mode.
- ifaddressNumber
- The number of interface ip addresses on this BIG/ip.
- ifaddressTable
- A table containing information about the BIG/ip interface ip addresses.
- ifaddressEntry
- Columns in the Interface Table.
- ifaddressIpAddress
- The ip address for this interface ip address.
- ifaddressInterfaceName
- The name of the interface for this ip address.
- ifaddressNetmask
- The netmask for this interface ip address.
- ifaddressBroadcast
- The broadcast address for this interface ip address.
- ifaddressType
- The type for this interface ip address.
- ifaddressUnitId
- The unit id for this interface ip address.
- ifaddressVLANTag
- The VLAN tag for this interface ip address.
- poolNumber
- The number of pools on this BIG/ip.
- poolTable
- A table containing information about the BIG/ip pools.
- poolEntry
- Columns in the Pool Table.
- poolName
- The name of this pool.
- poolLBMode
- The load balance mode of this pool.
- poolDependent
- Is this pool a dependent pool.
- poolMemberQty
- The number of members in this pool.
- poolBitsin
- The total bits in for this pool.
- poolBitsout
- The total bits out for this pool.
- poolBitsinHi32
- The total bits in for this pool.
- poolBitsoutHi32
- The total bits out for this pool.
- poolPktsin
- The total packets in for this pool.
- poolPktsout
- The total packets out for this pool.
- poolPktsinHi32
- The total packets in for this pool.
- poolPktsoutHi32
- The total packets out for this pool.
- poolMaxConn
- The maximum number of connections the members of this pool have had open at any one time.
- poolCurrentConn
- The current number of connections the members of this pool have open.
- poolTotalConn
- The total number of connections the members of this pool have served since the pool started.
- poolMemberNumber
- The number of pool members on this BIG/ip.
- poolMemberTable
- A table containing information about the BIG/ip pool members.
- poolMemberEntry
- Columns in the Pool Member Table.
- poolMemberPoolName
- The name of the pool which contains this member.
- poolMemberIpAddress
- The ip address of this pool member.
- poolMemberPort
- The port of this pool member.
- poolMemberMaintenance
- Is this pool member in maintenance mode.
- poolMemberRatio
- Load balancing ratio of the member within the pool. Used by member ratio load balancing mode.
- poolMemberPriority
- Priority level of the member within the pool. Used by priority member load balancing mode.
- poolMemberWeight
- Weight of the member within the pool. Used during dynamically calculated ratio load balancing.
- poolMemberRipeness
- The current load balancing state in member ratio load balancing mode.
- poolMemberBitsin
- The total bits in for this pool member.
- poolMemberBitsout
- The total bits out for this pool member.
- poolMemberBitsinHi32
- The total bits in for this pool member.
- poolMemberBitsoutHi32
- The total bits out for this pool member.
- poolMemberPktsin
- The total packets in for this pool member.
- poolMemberPktsout
- The total packets out for this pool member.
- poolMemberPktsinHi32
- The total packets in for this pool member.
- poolMemberPktsoutHi32
- The total packets out for this pool member.
- poolMemberConnLimit
- The maximum number of connections this pool member can have open at any one time.
- poolMemberMaxConn
- The maximum number of connections this pool member has had open at any one time.
- poolMemberCurrentConn
- The current number of connections this pool member has open.
- poolMemberTotalConn
- The total number of connections this pool member have served since the pool member started.
- virtualAddressNumber
- The number of virtual addresses on this BIG/ip.
- virtualAddressTable
- A table containing information about the BIG/ip Virtual Server addresses.
- virtualAddressEntry
- Columns in the Virtual Address Table.
- virtualAddressIpAddress
- The ip address for this virtual server.
- virtualAddressStatus
- Is this server in maintainance mode?
- virtualAddressConnLimit
- The total number of connections this virtual address can support at one time.
- virtualAddressNetmask
- The netmask for this virtual address.
- virtualAddressBroadcast
- The broadcast address for this virtual address.
- virtualAddressInterface
- The name of the network interface that this address is attached to.
- virtualAddressFailoverFlags
- The failover flags for the this virtual address. The virtualAddressFailoverFlag is no longer relevant. Mirroring is controlled through the virtualServerFailoverFlag.
- virtualAddressOctetsIn
- The number of octets received from the network from this virtual server.
- virtualAddressOctetsOut
- The number of octets sent to the network from this virtual server.
- virtualAddressPacketsIn
- The number of packets received from the network from this virtual server.
- virtualAddressPacketsOut
- The number of packets sent to the network from this virtual server.
- virtualAddressCurrentConn
- The number of connections currently open on this virtual server.
- virtualAddressMaxConn
- The maximum number of connections this virtual server has had open at any one time.
- virtualAddressTotalConn
- The total number of connections this virtual server has served since the server started.
- virtualAddressOctetsInHi32
- The number of octets received from the network from this virtual server.
- virtualAddressOctetsOutHi32
- The number of octets sent to the network from this virtual server.
- virtualAddressPacketsInHi32
- The number of packets received from the network from this virtual server.
- virtualAddressPacketsOutHi32
- The number of packets sent to the network from this virtual server.
- virtualAddressUnitId
- The unit id of this virtual server.
- virtualServerNumber
- The number of virtual servers on this BIG/ip.
- virtualServerTable
- A table containing BIG/ip Virtual server information.
- virtualServerEntry
- Columns in the Virtual Server table.
- virtualServerIpAddress
- The ip address for this virtual server.
- virtualServerPort
- The port for this virtual server.
- virtualServerStatus
- Is this server in maintainance mode?
- virtualServerConnLimit
- The total number of connections this virtual server can support at one time.
- virtualServerAppProtocol
- The application tunnelling protocol this virtual server uses.
- virtualServerAppProtocolTimeout
- The timeout for persistence timeout for this this application protocol session.
- virtualServerAppProtocolReaper
- The amount of idle time before we reap an application protocol session.
- virtualServerPersistTimeout
- The timeout for persistence on this connection.
- virtualServerPersistMask
- The IP addresses matching this mask will have persistent connections. Those not covered by this mask will not.
- virtualServerSticky
- Is Destination Address Affinity turned on for this connection?
- virtualServerStickyMask
- The addresses matching this mask will have Destination Address Affinity if virtualServerSticky is true.
- virtualServerFailoverFlags
- The failover flags for the this virtual server.
- virtualServerOctetsIn
- The number of octets received from the network from this virtual server.
- virtualServerOctetsOut
- The number of octets sent to the network from this virtual server.
- virtualServerPacketsIn
- The number of packets received from the network from this virtual server.
- virtualServerPacketsOut
- The number of packets sent to the network from this virtual server.
- virtualServerCurrentConn
- The number of connections currently open on this virtual server.
- virtualServerMaxConn
- The maximum number of connections this virtual server has had open at any one time.
- virtualServerTotalConn
- The total number of connections this virtual server has served since the server started.
- virtualServerSslNew
- The number of new SSL sessions on this virtual server.
- virtualServerSslHits
- The number of lookup successes in the SSL session id cache for valid session ids.
- virtualServerSslTimeouts
- The number of lookup successes in the SSL session id cache for session ids that have already been reaped.
- virtualServerSslMisses
- The number of lookup failures in the SSL session id cache.
- virtualServerOctetsInHi32
- The number of octets received from the network from this virtual server.
- virtualServerOctetsOutHi32
- The number of octets sent to the network from this virtual server.
- virtualServerPacketsInHi32
- The number of packets received from the network from this virtual server.
- virtualServerPacketsOutHi32
- The number of packets sent to the network from this virtual server.
- virtualServerCookieMethod
- The cookie persistence method for this virtual server.
- virtualServerRule
- The load balancing rule used by this virtual server.
- virtualServerPool
- The load balancing pool used by this virtual server if a load balancing rule is not defined.
- snatTransTable
- A table of all the secure NATS entries.
- snatTransEntry
- Columns in the table of secure NATS entries.
- snatTransEnabled
- Is this TransAddress enabled for SNAT?
- snatTransAddr
- The ipaddress to the outside world for this SNAT.
- snatTransIface
- The name of the interface that this trans address exists on.
- snatTransNetmask
- The network mask for the snatTransAddr.
- snatTransBroadcast
- The broadcast address for the snatTransAddr.
- snatTransSecsCollectingStats
- The number of seconds we have been collecting statistics for this port.
- snatTransBitsIn
- The total bits in for this SNAT.
- snatTransBitsOut
- The total bits out for this SNAT.
- snatTransPktsIn
- The total packets in for this SNAT.
- snatTransPktsOut
- The total packets out for this SNAT.
- snatTransCurrConns
- this SNAT.
- snatTransMaxConns
- has had open at any one time.
- snatTransTotalConns
- has had since the SNAT started.
- snatTransBitsInHi32
- The upper 32 bits of the total number of bits in for this SNAT.
- snatTransBitsOutHi32
- The upper 32 bits of the total number of bits out for this SNAT.
- snatTransPktsInHi32
- The upper 32 bits of the total number of packets in for this SNAT.
- snatTransPktsOutHi32
- The upper 32 bits of the total number of packets out for this SNAT.
- snatTransLastTransPort
- Last translated port accessed using the SNAT.
- snatTransUnitId
- the SNAT translation address is assigned.
- snatOrigTable
- A table of all the secure NATS entries.
- snatOrigEntry
- Columns in the table of secure NATS entries.
- snatOrigEnabled
- Is this OrigAddress enabled for SNAT?
- snatOrigAddr
- The ipaddress to the outside world for this SNAT.
- snatOrigConnLimit
- The maximum number of connections through this snat.
- snatOrigTransAddr
- The translation address corresponding to this original address.
- snatOrigTcpIdleTimeout
- The idle timeout for TCP connections though this snat.
- snatOrigUdpIdleTimeout
- The idle timeout for TCP connections though this snat.
- snatOrigStatsZeroTime
- The time we started collecting statistics for this port.
- snatOrigSecsCollectingStats
- The number of seconds we have been collecting statistics for this port.
- snatOrigBitsIn
- Total bits in for this SNAT.
- snatOrigBitsOut
- Total bits out for this SNAT.
- snatOrigPktsIn
- Total packets in for this SNAT.
- snatOrigPktsOut
- Total packets out for this SNAT.
- snatOrigCurrConns
- The current number of connections for this SNAT.
- snatOrigMaxConns
- had at any one time.
- snatOrigTotalConns
- had since the SNAT started.
- snatOrigBitsInHi32
- The upper 32 bits of the total number of bits in for this SNAT.
- snatOrigBitsOutHi32
- The upper 32 bits of the total number of bits out for this SNAT.
- snatOrigPktsInHi32
- The upper 32 bits of the total number of packets in for this SNAT.
- snatOrigPktsOutHi32
- The upper 32 bits of the total number of packets out for this SNAT.
- snatOrigLastTransPort
- Last translated port accessed using the SNAT.
- uptime
- The uptime of this device -- not the uptime of the SNMP agent.
- contot
- The total number of connections this balancer has serviced.
- concur
- The number of current connections.
- conmax
- The maximum number of connections that this balancer has serviced at one time.
- pktsin
- The total count of all packets read off the network.
- pktsout
- The total count of all packets written to the network.
- bitsin
- The total number of bits read off the network.
- bitsout
- The total count of all bits written to the network.
- portdeny
- The count of port denies that has occuried.
- droppedin
- The count of inbound packets that have been dropped.
- droppedout
- The count of outbound packets that have been dropped.
- active
- If this balancer in active or standby mode?
- mirrorenabled
- Is mirroring enabled on this load balancer?
- resetcounters
- Is mirroring enabled on this load balancer?
- pktsinHi32
- The total count of all packets read off the network.
- pktsoutHi32
- The total count of all packets written to the network.
- bitsinHi32
- The total number of bits read off the network.
- bitsoutHi32
- The total count of all bits written to the network.
- nodePing
- Node ping interval in seconds.
- nodeTimeout
- Node timeout interval in seconds.
- loadbalMode
- The global load balance mode.
- watchDogArmed
- Watch dog card state.
- snatConnLimit
- Number of simultaneous connections allowed through a SNAT.
- snatTCPIdleTimeout
- Default connection timeout for SNAT TCP connections.
- snatUDPIdleTimeout
- Default timeout for SNAT UDP connections.
- gatewayFailsafe
- Is gateway failsafe pinging enabled.
- unitId
- Unit id(s) for this load balancer.
- memoryUsed
- Memory used by the load balancer kernal.
- memoryTotal
- Total memory available to the load balancer kernal.
- vaddressNumber
- The number of virtual address's present on this system.
- vaddressTable
- A list of virtual address's entries. The number of entries is given by the value of vaddressNumber.
- vaddressEntry
- A vaddress entry containing vaddress information.
- vaddressIndex
- A unique value for each virtual address defined.
- vaddressDescr
- A textual string describing the virtual address.
- vaddressIpAddr
- The IP address for this virtual address.
- vaddressPktsin
- The total packets in for this virtual address.
- vaddressPktsout
- The total packets out of this virtual address.
- vaddressBitsin
- The total bits in for this virtual address.
- vaddressBitsout
- The total bits out of this virtual address.
- vaddressConcur
- The current number of connections on this virtual address.
- vaddressConmax
- The maximum number of connections this virtual server has had open at any one time.
- vaddressConlimit
- The total number of connections this virtual address can support at one time.
- vaddressContot
- The total number of connections this virtual server has served since the server started.
- vaddressStatus
- Status of this virtual address.
- vaddressPktsinHi32
- The total packets in for this virtual address.
- vaddressPktsoutHi32
- The total packets out of this virtual address.
- vaddressBitsinHi32
- The total bits in for this virtual address.
- vaddressBitsoutHi32
- The total bits out of this virtual address.
- ndaddrNumber
- The number of ndaddrs present on this system.
- ndaddrTable
- A list of ndaddr entries. The number of entries is given by the value of ndaddrNumber.
- ndaddrEntry
- A ndaddr entry containing ndaddr statitics.
- ndaddrIndex
- A unique value for each ndaddr defined.
- ndaddrDescr
- A textual string describing the node address.
- ndaddrIpAddr
- The Node address (IP Address).
- ndaddrPktsin
- The total packets in for this node address.
- ndaddrPktsout
- The total packets out for this node address.
- ndaddrBitsin
- The total bits in for this node address.
- ndaddrBitsout
- The total bits out for this node address.
- ndaddrConcur
- The number of current connections for this node address.
- ndaddrConmax
- The maximum number of connections this node address has had oppen at one time.
- ndaddrConlimit
- The maximum number of connections this node address is allowed to have open at one time.
- ndaddrContot
- The total connections that this node address had had.
- ndaddrStatus
- The status of this node address.
- ndaddrPktsinHi32
- The total packets in for this node address.
- ndaddrPktsoutHi32
- The total packets out for this node address.
- ndaddrBitsinHi32
- The total bits in for this node address.
- ndaddrBitsoutHi32
- The total bits out for this node address.
- ndaddrMaintenance
- Is this node address in maintenance mode.
- natNumber
- The number of NATS present on this system.
- natTable
- A list of NAT entries. The number of entries is given by the value of natNumber.
- natEntry
- A NAT entry containing information by nat.
- natIndex
- A unique value for each NAT defined.
- natDescr
- A textual string describing the NAT.
- natIpAddrFR
- The NAT's from IP Address.
- natIpAddrTO
- The NAT's TO IP Address.
- natPktsin
- The total packets in for this NAT.
- natPktsout
- The total packets out for this NAT.
- natBitsin
- The total bits in for this NAT.
- natBitsout
- The total bits out for this NAT.
- natPktsinHi32
- The total packets in for this NAT.
- natPktsoutHi32
- The total packets out for this NAT.
- natBitsinHi32
- The total bits in for this NAT.
- natBitsoutHi32
- The total bits out for this NAT.
- natOutsideNetmask
- The outside netmask for this NAT.
- natOutsideBroadcast
- The outside broadcast address for this NAT.
- natInterface
- The interface name for this NAT.
- natUnitId
- The unit id associated with this NAT.
- vportNumber
- The number of vports present on this system.
- vportTable
- A list of vport entries. The number of entries is given by the value of vportNumber.
- vportEntry
- A vport entry containing vport statitics.
- vportIndex
- A unique value for each virtual port defined.
- vportPort
- The Virutal port's port Number.
- vportDescr
- A textual string describing the virtual port.
- vportPktsin
- The total packets in for this virtual port.
- vportPktsout
- The total packets out for this virtual port.
- vportBitsin
- The total bits in for this virtual port.
- vportBitsout
- The total bits out for this virtual port.
- vportConcur
- The number of current connections for this virtual port
- vportConmax
- The maximum number of connections this virtual port has had open at any one time.
- vportConlimit
- The connection limit for this virtual port.
- vportContot
- The total number of connections this virtual port has had open since the server started.
- vportReaped
- The total connections reaped on this virtual port.
- vportPktsinHi32
- The total packets in for this virtual port.
- vportPktsoutHi32
- The total packets out for this virtual port.
- vportBitsinHi32
- The total bits in for this virtual port.
- vportBitsoutHi32
- The total bits out for this virtual port.
- vportAllowed
- Is this port allowed.
- vportTCPpersistance
- expires for this virtual port.
- vportUDPpersistance
- expires for this virtual port.
- memberTable
- A table containing balancer member information.
- memberEntry
- Information Specific to Members.
- memberVirtualAddress
- The virtual IP address.
- memberVirtualAddressPort
- The virtual IP address port.
- memberOrdinal
- The virtual IP address member ordinal number.
- memberAddress
- The node ip address for this member.
- memberPort
- The node port for this member.
- memberStatus
- The status of this member.
- memberPktsin
- The count of packets read off the network for this member.
- memberPktsout
- The count of packets written to the network for this member.
- memberBitsin
- The count of bits read off the network for this member.
- memberBitsout
- The count of bits written to the network for this member.
- memberConcur
- The number of connections currently open for this member.
- memberConmax
- The maximum number of connections this member has had open at any one time.
- memberConlimit
- The total number of connections this member can support at one time.
- memberContot
- The total number of connections this member has served since the server started.
- memberPktsinHi32
- The count of packets read off the network for this member.
- memberPktsoutHi32
- The count of packets written to the network for this member.
- memberBitsinHi32
- The count of bits read off the network for this member.
- memberBitsoutHi32
- The count of bits written to the network for this member.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
