MPLS-L3VPN-STD-MIB

MPLS-L3VPN-STD-MIB Download

MIBs list

This MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for MPLS-L3VPN-STD-MIB

mplsL3VpnConfiguredVrfs
The number of VRFs that are configured on this node.
mplsL3VpnActiveVrfs
The number of VRFs that are active on this node. That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus object value is equal to operational (1).
mplsL3VpnConnectedInterfaces
Total number of interfaces connected to a VRF.
mplsL3VpnNotificationEnable
If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be preserved across agent reboots.
mplsL3VpnVrfConfMaxPossRts
Denotes maximum number of routes that the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates that the device is unable to determine the absolute maximum. In this case, the configured maximum MAY not actually be allowed ...
mplsL3VpnVrfConfRteMxThrshTime
Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notific ...
mplsL3VpnIllLblRcvThrsh
The number of illegally received labels above which the mplsNumVrfSecIllglLblThrshExcd notification is issued. The persistence of this value mimics that of the device's configuration.
mplsL3VpnIfConfTable
This table specifies per-interface MPLS capability and associated information.
mplsL3VpnIfConfEntry
An entry in this table is created by an LSR for every interface capable of supporting MPLS L3VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table.
mplsL3VpnIfConfIndex
This is a unique index for an entry in the mplsL3VpnIfConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the MPLS-VPN-layer in the ifTable. Note that this table does not necessarily correspond one-to-o ...
mplsL3VpnIfVpnClassification
Denotes whether this link participates in a carrier's carrier, enterprise, or inter-provider scenario.
mplsL3VpnIfVpnRouteDistProtocol
Denotes the route distribution protocol across the PE-CE link. Note that more than one routing protocol may be enabled at the same time; thus, this object is specified as a bitmask. For example, static(5) and ospf(2) are a typical configuration.
mplsL3VpnIfConfStorageType
The storage type for this VPN If entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.
mplsL3VpnIfConfRowStatus
This variable is used to create, modify, and/or delete a row in this table. Rows in this table signify that the specified interface is associated with this VRF. If the row creation operation succeeds, the interface will have been associated with the spe ...
mplsL3VpnVrfTable
This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The ...
mplsL3VpnVrfEntry
An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. The indexing provides an ordering of VRFs per-VPN interface.
mplsL3VpnVrfName
The human-readable name of this VPN. This MAY be equivalent to the [RFC2685] VPN-ID, but may also vary. If it is set to the VPN ID, it MUST be equivalent to the value of mplsL3VpnVrfVpnId. It is strongly recommended that all sites supporting VRFs that a ...
mplsL3VpnVrfVpnId
The VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zero-length OCTET STRING.
mplsL3VpnVrfDescription
The human-readable description of this VRF.
mplsL3VpnVrfRD
The route distinguisher for this VRF.
mplsL3VpnVrfCreationTime
The time at which this VRF entry was created.
mplsL3VpnVrfOperStatus
Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. T ...
mplsL3VpnVrfActiveInterfaces
Total number of interfaces connected to this VRF with ifOperStatus = up(1). This value should increase when an interface is associated with the corresponding VRF and its corresponding ifOperStatus is equal to up(1). If an interface is associated whose if ...
mplsL3VpnVrfConfMidRteThresh
Denotes mid-level water marker for the number of routes that this VRF may hold.
mplsL3VpnVrfConfHighRteThresh
Denotes high-level water marker for the number of routes that this VRF may hold.
mplsL3VpnVrfConfMaxRoutes
Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0.
mplsL3VpnVrfConfLastChanged
The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF.
mplsL3VpnVrfConfRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus, and mplsL3VpnVrfConfStorageTy ...
mplsL3VpnVrfConfAdminStatus
Indicates the desired operational status of this VRF.
mplsL3VpnVrfConfStorageType
The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.
mplsL3VpnVrfRTTable
This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.
mplsL3VpnVrfRTEntry
An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. The indexing provides an ordering per-VRF instance. See [RFC4364] for a complete definition of a route target.
mplsL3VpnVrfRTIndex
Auxiliary index for route targets configured for a particular VRF.
mplsL3VpnVrfRTType
The route target distribution type.
mplsL3VpnVrfRT
The route target distribution policy.
mplsL3VpnVrfRTDescr
Description of the route target.
mplsL3VpnVrfRTRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfRTRowStatus.
mplsL3VpnVrfRTStorageType
The storage type for this VPN route target (RT) entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.
mplsL3VpnVrfSecTable
This table specifies per MPLS L3VPN VRF Table security-related counters.
mplsL3VpnVrfSecEntry
An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. Each entry in this table is used to indicate security-related information for each VRF entry.
mplsL3VpnVrfSecIllegalLblVltns
Indicates the number of illegally received labels on this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfSecDiscontinuityTime.
mplsL3VpnVrfSecDiscontinuityTime
The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object c ...
mplsL3VpnVrfPerfTable
This table specifies per MPLS L3VPN VRF Table performance information.
mplsL3VpnVrfPerfEntry
An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN.
mplsL3VpnVrfPerfRoutesAdded
Indicates the number of routes added to this VPN/VRF since the last discontinuity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfPerfDiscT ...
mplsL3VpnVrfPerfRoutesDeleted
Indicates the number of routes removed from this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfPerfDiscTime.
mplsL3VpnVrfPerfCurrNumRoutes
Indicates the number of routes currently used by this VRF.
mplsL3VpnVrfPerfRoutesDropped
This counter should be incremented when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. Discontinuities in the value of this counter can occur at re ...
mplsL3VpnVrfPerfDiscTime
The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object c ...
mplsL3VpnVrfRteTable
This table specifies per-interface MPLS L3VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and Interior Gateway Protocol IGP rou ...
mplsL3VpnVrfRteEntry
An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. Implem ...
mplsL3VpnVrfRteInetCidrDestType
The type of the mplsL3VpnVrfRteInetCidrDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.
mplsL3VpnVrfRteInetCidrDest
The destination IP address of this route. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrDestType object. The values for the index objects mplsL3VpnVrfRteInetCidrDest and mplsL3VpnVrfRteInetCidrPfxLen must be consistent. ...
mplsL3VpnVrfRteInetCidrPfxLen
Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the mplsL3VpnVrfRteInetCidrDest field. The values for the index objects mplsL3VpnVrfRteInetCidrDest and mpls ...
mplsL3VpnVrfRteInetCidrPolicy
This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the default value for this object.
mplsL3VpnVrfRteInetCidrNHopType
The type of the mplsL3VpnVrfRteInetCidrNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object.
mplsL3VpnVrfRteInetCidrNextHop
On remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrNHopType object.
mplsL3VpnVrfRteInetCidrIfIndex
The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.
mplsL3VpnVrfRteInetCidrType
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should ...
mplsL3VpnVrfRteInetCidrProto
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
mplsL3VpnVrfRteInetCidrAge
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.
mplsL3VpnVrfRteInetCidrNextHopAS
The Autonomous System Number of the next hop. The semantics of this object are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. When this object is unknown or not relevant, its value should be set to zero.
mplsL3VpnVrfRteInetCidrMetric1
The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1.
mplsL3VpnVrfRteInetCidrMetric2
An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1.
mplsL3VpnVrfRteInetCidrMetric3
An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1.
mplsL3VpnVrfRteInetCidrMetric4
An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1.
mplsL3VpnVrfRteInetCidrMetric5
An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1.
mplsL3VpnVrfRteXCPointer
Index into mplsXCTable that identifies which cross- connect entry is associated with this VRF route entry by containing the mplsXCIndex of that cross-connect entry. The string containing the single-octet 0x00 indicates that a label stack is not associated ...
mplsL3VpnVrfRteInetCidrStatus
The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).
mplsL3VpnScalarGroup
Collection of scalar objects required for MPLS VPN management.
mplsL3VpnVrfGroup
Collection of objects needed for MPLS VPN VRF management.
mplsL3VpnIfGroup
Collection of objects needed for MPLS VPN interface management.
mplsL3VpnPerfGroup
Collection of objects needed for MPLS VPN performance information.
mplsL3VpnPerfRouteGroup
Collection of objects needed to track MPLS VPN routing table dropped routes.
mplsL3VpnSecGroup
Collection of objects needed for MPLS VPN security-related information.
mplsL3VpnVrfRteGroup
Objects required for VRF route table management.
mplsL3VpnVrfRTGroup
Objects required for VRF route target management.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list