MPLS-VPN-MIB Download

mplsVpnConfiguredVrfs

The number of VRFs which are configured on this node.

mplsVpnActiveVrfs

The number of VRFs which are active on this node. That is, those VRFs whose corresponding mplsVpnVrfOperStatus object value is equal to operational (1).

mplsVpnConnectedInterfaces

Total number of interfaces connected to a VRF.

mplsVpnNotificationEnable

If this object is true, then it enables the generation of all notifications defined in this MIB.

mplsVpnVrfConfMaxPossibleRoutes

Denotes maximum number of routes which the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates that the device is unable to determine the absolute maximum. In this case, the configured maximum MAY not actually be allowed ...

mplsVpnInterfaceConfTable

This table specifies per-interface MPLS capability and associated information.

mplsVpnInterfaceConfEntry

An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table.

mplsVpnInterfaceConfIndex

This is a unique index for an entry in the MplsVPNInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the MPLS-VPN-layer in the ifTable. Note that this table does not necessarily correspond one- ...

mplsVpnInterfaceLabelEdgeType

Either the providerEdge(0) (PE) or customerEdge(1) (CE) bit MUST be set.

mplsVpnInterfaceVpnClassification

Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.

mplsVpnInterfaceVpnRouteDistProtocol

Denotes the route distribution protocol across the PE-CE link. Note that more than one routing protocol may be enabled at the same time.

mplsVpnInterfaceConfStorageType

The storage type for this entry.

mplsVpnInterfaceConfRowStatus

The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation succeeds, the interface will have been associated, otherwise the a ...

mplsVpnVrfTable

This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The ...

mplsVpnVrfEntry

An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.

mplsVpnVrfName

The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.

mplsVpnVrfDescription

The human-readable description of this VRF.

mplsVpnVrfRouteDistinguisher

The route distinguisher for this VRF.

mplsVpnVrfCreationTime

The time at which this VRF entry was created.

mplsVpnVrfOperStatus

Denotes whether a VRF is operational or not. A VRF is up(1) when at least one interface associated with the VRF, which ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are n ...

mplsVpnVrfActiveInterfaces

Total number of interfaces connected to this VRF with ifOperStatus = up(1). This counter should be incremented when: a. When the ifOperStatus of one of the connected interfaces changes from down(2) to up(1). b. When an interface with ifOperStatus = up(1) ...

mplsVpnVrfAssociatedInterfaces

Total number of interfaces connected to this VRF (independent of ifOperStatus type).

mplsVpnVrfConfMidRouteThreshold

Denotes mid-level water marker for the number of routes which this VRF may hold.

mplsVpnVrfConfHighRouteThreshold

Denotes high-level water marker for the number of routes which this VRF may hold.

mplsVpnVrfConfMaxRoutes

Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to mplsVrfMaxPossibleRoutes unless it is set to 0.

mplsVpnVrfConfLastChanged

The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF.

mplsVpnVrfConfRowStatus

This variable is used to create, modify, and/or delete a row in this table.

mplsVpnVrfConfStorageType

The storage type for this entry.

mplsVpnVrfRouteTargetTable

This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.

mplsVpnVrfRouteTargetEntry

An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance.

mplsVpnVrfRouteTargetIndex

Auxiliary index for route-targets configured for a particular VRF.

mplsVpnVrfRouteTargetType

The route target export distribution type.

mplsVpnVrfRouteTarget

The route target distribution policy.

mplsVpnVrfRouteTargetDescr

Description of the route target.

mplsVpnVrfRouteTargetRowStatus

Row status for this entry.

mplsVpnVrfBgpNbrAddrTable

Each entry in this table specifies a per-interface MPLS/EBGP neighbor.

mplsVpnVrfBgpNbrAddrEntry

An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.

mplsVpnVrfBgpNbrIndex

This is a unique tertiary index for an entry in the MplsVpnVrfBgpNbrAddrEntry Table.

mplsVpnVrfBgpNbrRole

Denotes the role played by this EBGP neighbor with respect to this VRF.

mplsVpnVrfBgpNbrType

Denotes the address family of the PE address.

mplsVpnVrfBgpNbrAddr

Denotes the EBGP neighbor address.

mplsVpnVrfBgpNbrRowStatus

This variable is used to create, modify, and/or delete a row in this table.

mplsVpnVrfBgpNbrStorageType

The storage type for this entry.

mplsVpnVrfBgpNbrPrefixTable

This table specifies per-VRF vpnv4 multi-protocol prefixes supported by BGP.

mplsVpnVrfBgpNbrPrefixEntry

An entry in this table is created by an LSR for every BGP prefix associated with a VRF supporting a MPLS/BGP VPN. The indexing provides an ordering of BGP prefixes per VRF.

mplsVpnVrfBgpPathAttrPeer

The IP address of the peer where the path information was learned.

mplsVpnVrfBgpPathAttrIpAddrPrefixLen

Length in bits of the IP address prefix in the Network Layer Reachability Information field.

mplsVpnVrfBgpPathAttrIpAddrPrefix

An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by mplsVpnVrfBgpPathAttrIpAddrPrefixLen. Any bits beyond the length specified by mplsVpnVrfBgpPathAttrIpAdd ...

mplsVpnVrfBgpPathAttrOrigin

The ultimate origin of the path information.

mplsVpnVrfBgpPathAttrASPathSegment

The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_ ...

mplsVpnVrfBgpPathAttrNextHop

The address of the border router that should be used for the destination network.

mplsVpnVrfBgpPathAttrMultiExitDisc

This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.

mplsVpnVrfBgpPathAttrLocalPref

The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.

mplsVpnVrfBgpPathAttrAtomicAggregate

Whether or not the local system has selected a less specific route without selecting a more specific route.

mplsVpnVrfBgpPathAttrAggregatorAS

The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.

mplsVpnVrfBgpPathAttrAggregatorAddr

The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.

mplsVpnVrfBgpPathAttrCalcLocalPref

The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.

mplsVpnVrfBgpPathAttrBest

An indication of whether or not this route was chosen as the best BGP4 route.

mplsVpnVrfBgpPathAttrUnknown

One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.

mplsVpnVrfSecTable

This table specifies per MPLS/BGP VPN VRF Table security features.

mplsVpnVrfSecEntry

An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. Each entry in this table is used to indicate security-related information for each VRF entry.

mplsVpnVrfSecIllegalLabelViolations

Indicates the number of illegally received labels on this VPN/VRF.

mplsVpnVrfSecIllegalLabelRcvThresh

The number of illegally received labels above which this notification is issued.

mplsVpnVrfPerfTable

This table specifies per MPLS/BGP VPN VRF Table performance information.

mplsVpnVrfPerfEntry

An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN.

mplsVpnVrfPerfRoutesAdded

Indicates the number of routes added to this VPN/VRF over the coarse of its lifetime.

mplsVpnVrfPerfRoutesDeleted

Indicates the number of routes removed from this VPN/VRF.

mplsVpnVrfPerfCurrNumRoutes

Indicates the number of routes currently used by this VRF.

mplsVpnVrfRouteTable

This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in ...

mplsVpnVrfRouteEntry

An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.

mplsVpnVrfRouteDest

The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of t ...

mplsVpnVrfRouteDestAddrType

The address type of the mplsVpnVrfRouteDest entry.

mplsVpnVrfRouteMask

Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mplsVpnVrf ...

mplsVpnVrfRouteMaskAddrType

The address type of mplsVpnVrfRouteMask.

mplsVpnVrfRouteTos

The IP TOS Field is used to specify the policy to be applied to this route. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-- ...

mplsVpnVrfRouteNextHop

On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .

mplsVpnVrfRouteNextHopAddrType

The address type of the mplsVpnVrfRouteNextHopAddrType object.

mplsVpnVrfRouteIfIndex

The ifIndex value that identifies the local interface through which the next hop of this route should be reached.

mplsVpnVrfRouteType

The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for that the next hop is not the final destination. Routes which do not result in traffic forwarding or rejection shoul ...

mplsVpnVrfRouteProto

The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.

mplsVpnVrfRouteAge

The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.

mplsVpnVrfRouteInfo

A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mplsVpnVrfRouteProto value. If this information is not present, its value SHOULD be set ...

mplsVpnVrfRouteNextHopAS

The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. When this object is unknown or not relevant its value should be set to zero.

mplsVpnVrfRouteMetric1

The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set to -1.

mplsVpnVrfRouteMetric2

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set to -1.

mplsVpnVrfRouteMetric3

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set to -1.

mplsVpnVrfRouteMetric4

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set to -1.

mplsVpnVrfRouteMetric5

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set to -1.

mplsVpnVrfRouteRowStatus

Row status for this table. It is used according to row installation and removal conventions.

mplsVpnVrfRouteStorageType

Storage type value.

mplsVpnScalarGroup

Collection of scalar objects required for MPLS VPN management.

mplsVpnVrfGroup

Collection of objects needed for MPLS VPN VRF management.

mplsVpnInterfaceGroup

Collection of objects needed for MPLS VPN interface management.

mplsVpnPerfGroup

Collection of objects needed for MPLS VPN performance information.

mplsVpnVrfBgpNbrGroup

Collection of objects needed for MPLS VPN bgp neighbor-related information.

mplsVpnVrfBgpPrefixGroup

Collection of objects needed for MPLS VPN bgp neighbor-related information.

mplsVpnSecGroup

Collection of objects needed for MPLS VPN security-related information.

mplsVpnVrfRouteGroup

Objects required for VRF route table management.

mplsVpnVrfRouteTargetGroup

Objects required for VRF route target management.