MRD-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the MRD-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the MRD-MIB .

OID list for MRD-MIB

mrdVersion: The current version of Mrouted.
mrdCachedRouteResTime: The amount of time cached routes stay in memory in seconds. The minimum value is 300, the maximum value is 86,400.
mrdPruneFlag: This flag indicates whether or not this router is a pruning router or not.
mrdConfigUpdate: This flag indicates whether or not the system software will update the online system with the changes entered into the configuration file. This will cause a stop and restart of the Mrouted software.
mrdEnableDisable: This flag indicates whether or not mrouted will be enabled or disabled.
mrdIntfBoundaryTable: The mrdBoundaryTable contains the entries that describe the mrd boundary table
mrdIntfBoundaryEntry: An entry in the table, containing information about a PNNI logical node in this switching system.
mrdIntfPhyIntAddr: This value indicates the physical interface or tunnel address associated with this boundary entry.
mrdIntfScopedAddress: This value indicates the scoped address for the given boundary.
mrdIntfBoundMaskLength: This value gives the mask length of the scoped address.
mrdIntfAdminState: This value gives current state of this interface.
mrdTunBoundaryTable: The mrdBoundaryTable contains the entries that describe the mrd boundary table
mrdTunBoundaryEntry: An entry in the table, containing information about a PNNI logical node in this switching system.
mrdTunLocalAddress: This value indicates the physical interface or tunnel address associated with this boundary entry.
mrdTunRemoteAddress: This value indicates the physical interface or tunnel address associated with this boundary entry.
mrdTunScopedAddress: This value indicates the scoped address for the given boundary.
mrdTunBoundMaskLength: This value gives the mask length of the scoped address.
mrdTunAdminState: This value gives current state of this interface.
mrdAltNetTable: The mrdBoundaryTable contains the entries that describe the mrd boundary table
mrdAltNetEntry: An entry in the table, containing information about a PNNI logical node in this switching system.
mrdAltNetAddr: This value indicates the address of the Physical Interface that this alternate network is associated with network.
mrdNetworkAddress: This value indicates the network address for the given alternate network.
mrdANetMaskLength: This value gives the mask length of the alternate network address.
mrdANetAdminState: This value gives current state of this interface.
mrdInterfaceTable: The mrdInterfaceTable contains the entries that describe the Multicast Interface table.
mrdInterfaceEntry: An entry in the table, containing information about a Multicast Interace Table.
mrdIFAddress: This value indicates the network address for the given multicast interface table entry.
mrdIFEnabledFlag: This value indicates this entry in the Multicast interface table is enabled or not.
mrdIFMetric: This value indicates path metric for this entry in the Multicast Interface table.
mrdIFThreshold: This value indicates the threshold for this entry in the Multicast Interface table.
mrdIFRateLimit: This value indicates the rate limit for this entry in the Multicast Interface table.
mrdIFBoundary: This flag indicates whether or not there is a list of boundary addresses associated with this interface table.
mrdIFAlternateNetwork: This value indicates whether or not there is a list of alternate network addresses associated with this interface.
mrdIFAdminState: This value gives current state of this interface.
mrdTunnelTable: The mrdTunnelTable contains the entries that describe the Multicast Tunnel table.
mrdTunnelEntry: An entry in the table, containing information about a Multicast Tunnel Table.
mrdLocalAddress: This value indicates the local network address for the given multicast tunnel table entry.
mrdRemoteAddress: This value indicates the remote network address for the given multicast tunnel.
mrdTunnelMetric: This value indicates path metric for this entry in the Multicast Tunnel table.
mrdTunnelThreshold: This value indicates the threshold for this entry in the Multicast Tunnel table.
mrdTunnelRateLimit: This value indicates the rate limit for this entry in the Multicast Tunnel table.
mrdTunnelBoundary: This flag indicates whether or not there is a list of boundaries for this tunnel entry.
mrdTunnelAdminState: This value gives current state of this interface.
mrdGroupTable: The mrdGroupTable contains one entry for each group or subnet that is defined on the switch.
mrdGroupEntry: An entry in the table, containing information about a Multicast Group Table.
mrdGroupID: This value indicates the Vlan Group of this entry.
mrdGroupVlanMask: This value indicates the Vlan Mask of the group.
mrdGroupSrcIP: This value indicates the source IP address of the group.
mrdGroupSrcIPNet: This value indicates the source IP network address of the group.
mrdGroupSrcNetMask: This value contains the network mask for the source IP address.
mrdGroupMetric: This value indicates the metric for this group.
mrdGroupThreshold: This field indicates how may hops the multicast stream can take.
mrdGroupRate: This value describes the maximum data rate allowed on this interface.
mrdGroupPacketsIn: This value describes the number of packets received on this interface.
mrdGroupPacketsOut: This value describes the maximum data rate allowed on this interface.
mrdGroupOneWayFlg: This flag indicates whether or not this interface is in one-way mode.
mrdGroupDownFlg: This flag indicates whether or not this interface is down.
mrdGroupDisabledFlg: This flag indicates whether or not this interface is disabled.
mrdGroupQuerierFlg: This flag indicates whether or not this interface is a querier.
mrdGroupSrcRteFlg: This flag indicates whether or not this interface is source routed.
mrdGroupLeafFlg: This flag indicates whether or not this interface is a leaf.
mrdGroupIgmpv1Flg: This flag indicates whether or not this interface is running IGMP V1.
mrdTunnelListTable: The mrdTunnelListTable contains one entry for each group or subnet that is defined on the switch.
mrdTunnelListEntry: An entry in the table, containing information about a Multicast Tunnel List Table.
mrdTunnelListGrpID: This value indicates the Vlan Group of this entry.
mrdTunnelListVlanMask: This value indicates the Vlan Mask of the tunnel.
mrdTunnelListSrcIP: This value indicates the source IP address of the tunnel.
mrdTunnelListDstIP: This value indicates the destination or remote IP address of the tunnel.
mrdTunnelListMetric: This value indicates the metric for this tunnel.
mrdTunnelListThreshold: This field indicates how may hops the multicast stream can take.
mrdTunnelListRate: This value describes the maximum data rate allowed on this interface.
mrdTunnelListPacketsIn: This value describes the number of packets received on this interface.
mrdTunnelListPacketsOut: This value describes the maximum data rate allowed on this interface.
mrdTunnelListOneWayFlg: This flag indicates whether or not this interface is in one-way mode.
mrdTunnelListDownFlg: This flag indicates whether or not this interface is down.
mrdTunnelListDisabledFlg: This flag indicates whether or not this interface is disabled.
mrdTunnelListQuerierFlg: This flag indicates whether or not this interface is a querier.
mrdTunnelListSrcRteFlg: This flag indicates whether or not this interface is source routed.
mrdTunnelListLeafFlg: This flag indicates whether or not this interface is a leaf.
mrdTunnelListIgmpv1Flg: This flag indicates whether or not this interface is running IGMP V1.
mrdPeerTable: The mrdPeerTable contains one entry for each group or subnet that is defined on the switch.
mrdPeerEntry: An entry in the table, containing information about a Multicast Tunnel List Table.
mrdPeerGrpID: This value indicates the Vlan Group of this entry.
mrdPeerVlanMask: This value indicates the Vlan Mask of this entry.
mrdPeerSrcIP: This value indicates the source IP address of the interface.
mrdPeerPeerIP: This value indicates the IP address of the peer.
mrdPeerMajorLevel: This value indicates the major version level of this peer.
mrdPeerMinorLevel: This field indicates the minor version level of this peer.
mrdPeerTimer: This value indicates the number of seconds since a neighbor probe has been received.
mrdPeerFlags: This value describes the raw contents of the peer's flag byte.
mrdPeerLeafFlag: This flag indicates whether or not this peer is a leaf.
mrdPeerPruneFlag: This flag indicates whether or not this peer supports pruning.
mrdPeerGenIdFlag: This flag indicates whether or not this peer includes the genid and rtlist in probes.
mrdPeerMtraceFlag: This flag indicates whether or not this peer supports mtrace requests.
mrdAltNetList: The mrdAltNetListTable contains one entry for each alternate Network that is currently running in the switch.
mrdAltNetListEntry: An entry in the table, containing information about an Alternate Network List Table.
mrdAltNetListGrpID: This value indicates the Vlan Group of this entry.
mrdAltNetListVlanMask: This value indicates the Vlan Mask of this entry.
mrdAltNetListSrcIP: This value indicates the source IP address of the interface.
mrdAltNetListAltNetIP: This value indicates the IP address of the Alternate Network.
mrdAltNetListAltNetNetMask: This value contains the network mask for the Alternate Network IP address.
mrdBoundaryList: The mrdBoundaryListTable contains one entry for each boundary entry that is running in the switch.
mrdBoundaryListEntry: An entry in the table, containing information about a Boundary List Table.
mrdBoundaryListGrpID: This value indicates the Vlan Group of this entry.
mrdBoundaryListVlanMask: This value indicates the Vlan Mask of this entry.
mrdBoundaryListSrcIP: This value indicates the source IP address of the interface.
mrdBoundaryListBoundaryIP: This value indicates the IP address of the Boundary entry.
mrdBoundaryListBoundaryNetMask: This value contains the network mask for the Boundary Network IP address.
mrdGroupMemTable: The mrdGroupMem contains one entry for each Multicast Group membership entry that is running in the switch.
mrdGroupMemEntry: An entry in the table, containing information about a Group Membership Table.
mrdGroupMemGrpID: This value indicates the Vlan Group of this entry.
mrdGroupMemVlanMask: This value indicates the Vlan Mask of this entry.
mrdGroupMemSrcIP: This value indicates the source IP address of the interface.
mrdGroupMemIP: This value indicates the IP address of the IP Multicast group membership.
mrdGroupMemTimer: This value indicates the number of seconds before this membership times out.
mrdForwardingTable: The mrdForwardingTable contains one entry for each entry in the forwarding table on the switch.
mrdForwardingEntry: An entry in the table, containing information about a Forwarding Table.
mrdForwardingSrcIP: This value indicates the Source IP address of this multicast stream.
mrdForwardingDstIP: This value indicates the destination IP address of this multicast stream.
mrdForwardingGrpID: This value indicates the Destination Group ID for this multicast stream.
mrdForwardingVlanMask: This value indicates the Vlan mask of the forwarding group.
mrdForwardingSrcGrpID: This value contains the Vlan Group ID where this stream originates.
mrdForwardingSrcVlanMask: This value contains the Vlan mask of the source group.
mrdPruneTable: The mrdPruneTable contains one entry for each entry in the prune table on the switch.
mrdPruneEntry: An entry in the table, containing information about a Prune Table.
mrdPruneDstGroup: This value indicates the Destination IP address that is being pruned.
mrdPrunePruningRouter: This value indicates the IP address of the router that is pruning.
mrdPruneGrpID: This value indicates the Group ID of the pruning router.
mrdPruneVlanMask: This value indicates the Vlan mask of the pruning router.
mrdPruneTimer: This value contains the timer value associated with this prune entry.
mrdRouteTable: The mrdRouteTable contains one entry for each entry in the forwarding table on the switch.
mrdRouteEntry: An entry in the table, containing information about a Route Table.
mrdRouteOriginIP: This value indicates the IP address of origin of this route.
mrdRouteOriginMask: This value indicates the network mask of the origin.
mrdRouteGatewayIP: This value indicates the IP address of the gateway.
mrdRouteGrpID: This value indicates the Group ID for which the entry has a route.
mrdRouteVlanMask: This value contains the Vlan mask for the group.
mrdRouteLeafFlag: This value contains a flag indicating if the router in the route entry is a leaf router or not.
mrdRouteTunFlag: This value contains a flag indicating if the router in the route entry is a tunnel or not.
mrdRouteSrcGrpID: This value contains the Vlan group of the interface that received this route entry.
mrdRouteSrcVlanMask: This value contains the Vlan mask of the source group.
mrdRouteMetric: This value contains the metric for this route.
mrdRouteTimer: This value contains the timer value for this route entry.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list