MYLEXDAC960SCSIRAIDCONTROLLER-MIB ING-MIB Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for MYLEXDAC960SCSIRAIDCONTROLLER-MIB ING-MIB
- tComponentid
- group is required.
- eComponentid
- INDEX {DmiComponentIndex} ::= {tComponentid 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Controller Manufacturer.
- a1Product
- Product Name for this Controller.
- a1Version
- ::= {eComponentid 3} SYNTAX DmiDisplaystring ACCESS not-accessible STATUS mandatory DESCRIPTION "
- a1Installation
- The time and date for the last time this componentwas installed.
- a1Verify
- is still installed and working.
- tControllerInformation
- This group provides Controller Information.
- eControllerInformation
- INDEX {DmiComponentIndex, a2ControllerNumber} ::= {tControllerInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number assigned to this controller by the device driver.
- a2OperationalState
- driver.
- a2FirmwareRevision
- Controller Firmware Revision.
- a2ConfiguredChannels
- configuration.
- a2ActualChannels
- on-board the controller.
- a2MaximumLogicalDrives
- this controller.
- a2MaximumTargetsPerChannel
- Maximum Number of SCSI Target IDs supported per SCSI Bus.
- a2MaximumTaggedRequests
- disk device by Controller Firmware.
- a2MaximumDataTransferSizePerIoRequestInK
- IO request - in KB.
- a2MaximumConcurrentCommands
- simultaneouly.
- a2RebuildRate
- Value of Rebuild Rate.
- a2LogicalSectorSizeInBytes
- Logical Sector Size in Bytes (Default: 512 bytes).
- a2PhysicalSectorSizeInBytes
- Physical Sector Size in Bytes (Default: 512 bytes).
- a2CacheLineSizeInBytes
- Cache Line Size in Bytes.
- a2DramSizeInMb
- Size of Controller EPROM Module - in MB.
- a2EpromSizeInKb
- Size of Controller EPROM Module - in KB.
- a2BusType
- Controller - System Bus Interface Type.
- a2SystemBusNumber
- with. This value is supplied by the Operating system and may not be defined for all operating systems.
- a2SlotNumber
- for EISA and MCA controller only. For PCI controller it will always be set to 0.
- a2InterruptVectorNumber
- value is a mapped IRQ supplied by OperatingSystem and may not be same as the actual Interrupt Vector.
- a2InterruptMode
- Interrupt Mode - Edge/Level.
- tLogicalDriveInformation
- Provides information about Logical Drive Configuration.
- eLogicalDriveInformation
- INDEX {DmiComponentIndex, a3ControllerNumber, a3LogicalDriveNumber} ::= {tLogicalDriveInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.
- a3LogicalDriveNumber
- Logical Drive Number - used as a Key.
- a3OperationalState
- Logical Drive Operational State.
- a3RaidLevel
- RAID Level associated with Logical Drive.
- a3WritePolicy
- Write Cache Policy associated with Logical Drive.
- a3SizeInMb
- Logical Drive Size - in MB.
- a3StripeSizeInBytes
- Levels 0, 5 and 6 only. Value is specifed in bytes.
- a3PhysicalDriveMap
- The information is provided in Channel-Target combination form.
- tPhyicalDeviceInformation
- SCSI Physical Device Information.
- ePhyicalDeviceInformation
- INDEX {DmiComponentIndex, a4ControllerNumber, a4ScsiBusId, a4ScsiTargetId} ::= {tPhyicalDeviceInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key
- a4ScsiBusId
- SCSI Channel Number - used as a key
- a4ScsiTargetId
- SCSI Physical Device Target Id - used as a key
- a4OperationalState
- SCSI Physical Device State.
- a4VendorId
- Physical Device Vendor Id - from SCSI Inquiry Info.
- a4ProductId
- Physical Device Product Id - from SCSI Inquiry Info.
- a4ProductRevisionLevel
- Info.
- a4SizeInMb
- Size in MB - from SCSI Read Capacity Data.
- a4DeviceType
- SCSI Device Type - from SCSI Inquiry Information.
- a4SoftErrorsCount
- Number of Soft Errors.
- a4HardErrorsCount
- Number of Hard Errors.
- a4ParityErrorsCount
- Number of Parity Errors.
- a4MiscErrorsCount
- Number of Misc Errors.
- tMylexDac960ComponentInstrumentationInfo
- MDAC CI Software Version Information.
- eMylexDac960ComponentInstrumentationInfo
- INDEX {DmiComponentIndex} ::= {tMylexDac960ComponentInstrumentationInfo 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "CI Software Revision Information.
- a5CiBuildDate
- CI Software Build Date Information - date/month/year format.
- a5MdacDeviceDriverRevision
- Mylex DAC960 Controller Device driver Revision Info.
- a5MdacDeviceDriverBuildDate
- ear format.
- tLogicalDriveStatistics
- Logical Drive Performance Statistics
- eLogicalDriveStatistics
- INDEX {DmiComponentIndex, a6ControllerNumber, a6LogicalDriveNumber} ::= {tLogicalDriveStatistics 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.
- a6LogicalDriveNumber
- Logical Drive Number - used as a key.
- a6ReadRequestsCount
- Number of Read Requests.
- a6AmountOfDataReadInMb
- Amount of Data Read - in MB.
- a6WriteRequestsCount
- Number of Write Requests.
- a6AmountOfDataWrittenInMb
- Amount of data written - in MB.
- a6ReadCacheHit
- Read Cache Hit Rate.
- tPhysicalDriveStatistics
- Physical Drive Performance Statistics
- ePhysicalDriveStatistics
- INDEX {DmiComponentIndex, a7ControllerNumber, a7ScsiBusId, a7ScsiTargetId} ::= {tPhysicalDriveStatistics 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.
- a7ScsiBusId
- SCSI Channel Number - used as a key.
- a7ScsiTargetId
- SCSI Target Device Id - used as a key.
- a7ReadRequestsCount
- Number of Read Requests.
- a7AmountOfDataReadInKb
- Amount of Data Read - in KB.
- a7WriteRequestsCount
- Number of Write Requests.
- a7AmountOfDataWrittenInKb
- Amount of data written - in KB.
- tErrorControl
- Indication control and status for the parent group
- eErrorControl
- INDEX {DmiComponentIndex, a98Selfid} ::= {tErrorControl 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Instance Identifier. A unique number that identifies this row.
- a98NumberOfFatalErrors
- Count of all fatal errors since system startup.
- a98NumberOfMajorErrors
- Count of all major errors since system startup.
- a98NumberOfWarnings
- Count of all warning errors since system startup.
- a98ErrorStatus
- current error status
- a98ErrorStatusType
- status.
- a98AlarmGeneration
- Controls indication generation for errors.
- tMiftomib
- to SNMP translati n
- eMiftomib
- INDEX {DmiComponentIndex} ::= {tMiftomib 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The MIB name that defines this MIF
- a99MibOid
- The MIB OID that corresponds to this MIF
- a99DisableTrap
- from this component
- tTrapGroup
- definition. This group does not exist in MIF file
- eTrapGroup
- INDEX {DmiComponentIndex} ::= {tTrapGroup 1} SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Date & Time when the error occured
- a9999ErrorStatus
- Error Status Code
- a9999ErrorGroupId
- Group ID of the errorControl Group
- a9999ErrorInstanceId
- Instance ID of the errorControl Group
- a9999ComponentId
- Component ID of the component that caused this error
- a9999GroupId
- Group ID of the Group that caused this error
- a9999InstanceId
- Instance ID of the Group that caused this error
- a9999VendorCode1
- Vendor specific code 1
- a9999VendorCode2
- Vendor specific code 2
- a9999VendorText
- Vendor specific octet string info
- a9999ParentGroupId
- Group ID of parent of Group that caused this error
- a9999ParentInstanceId
- Instance ID of parent of Group that caused this error
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
