NETSCREEN-POLICY-MIB Download

nsPlyTable

A firewall provides a network boundary with a single point of entry and exit-a choke point.You can screen and direct all that traffic through the implementation of a set of access policies. Access policies allow you to permit, deny, encrypt, authenticate, ...

nsPlyEntry

Each entry in the nsPlyTable holds a set of configuration parameters associatied with an instance of policy.

nsPlyId

Each policy is identified by a unique policy ID.

nsPlyVsys

Vitural system's name this polic entry belongs to.

nsPlySrcZone

Traffic through a firewall means that traffic flows from one security zone to another. This object describes the source zone name traffic flow passes.

nsPlyDstZone

Traffic through a firewall means that traffic flows from one security zone to another. This object describes the destination zone name traffic flow passes.

nsPlySrcAddr

Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall on which security zone.To create an access policy for specific addresses, you must first create entries for the relevant hosts and ...

nsPlyDstAddr

Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall-on which security zone.To create an access policy for specific addresses, you must first create entries for the relevant hosts and ...

nsPlyService

Sevices are objects that identify application protocols using layer 4 information such as standard and accepted TCP and UDP port numbers for application services like Telnet, FTP, SMTP and HTTP. This object indicates all the traffic service type this poli ...

nsPlyAction

Actions objects that describe what the firewall does to the traffic it receives. Permit allows the packet to pass the firewall. Deny blocks the packet from traversing the firewall. Tunnel encapsulates outgoing IP packets and decapsulates incoming IP packe ...

nsPlyNat

You can apply NAT at the interface level or at the policy level. With policy-based NAT, you can translate the source address on either incoming or outging network and VPN traffic. This object indicates if this is a policy-based NAT.

nsPlyFixPort

When in policy-based NAT, the new secure address can come from either a Dynamic IP or from a Mapped IP. This object indicates if poliy-based NAT uses fix port when working on NAT mode.

nsPlyDipId

This object indicates the Dynamic ID chosen for NAT policy.

nsPlyVpnTunnel

VPN tunnel this access policy applies to.

nsPlyL2tpTunnel

L2TP tunnel this access policy applies to.

nsPlyAuth

This objec indicates the selecting this option requires the user at the source address to authenticate his/her identiry by supplying a user name and password before traffic is allowed to graverw the firewall or enter the VPN tunnel.

nsPlyLogEnable

When you enable logging in an access policy, the NetScreen device logs all connections to which that paticular access policy applies.

nsPlyCountEnable

When you enable counting in an access plicy, the NetScreen device counts the total number of bytes of traffic to which this access policy applies and records the informaiton in historical graphs.

nsPlyAlarmBPS

User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per second.

nsPlyAlarmBPM

User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per Minute.

nsPlySchedule

By associating a schedule to an access policy, you can determine when the access policy is in effect.

nsPlyTrafficShapeEnable

User can set parameters for the control and shaping of traffic for each access policy.

nsPlyTrafficPriority

Traffic priority for this policy.

nsPlyDSEnable

Differentiated Services is a system for tagging traffic at a position within a hierarchy of priority.

nsPlyActiveStatus

Show the status of one policy entry.

nsPlyMonTable

traffic information for the policy-based traffic.

nsPlyMonEntry

An entry holds a set of traffic counters of a specific policy.

nsPlyMonId

Policy Id, also used as index in this table

nsPlyMonVsys

vsys this policy belongs to

nsPlyMonPackPerSec

Packets go through this policy per second

nsPlyMonPackPerMin

Packets go through this policy per minute

nsPlyMonTotalPacket

total packets go through this policy

nsPlyMonBytePerSec

Bytes go through this policy per second

nsPlyMonBytePerMin

Bytes go through this policy per minute

nsPlyMonTotalByte

Total bytes go through this policy

nsPlyMonSessionPerSec

Sessions go through this policy per second

nsPlyMonSessionPerMin

Sessions go through this policy per minute

nsPlyMonTotalSession

Total Sessions go through this policy