NETSCREEN-VPN-MON-MIB Download
This module defines NetScreen private MIBs for VPN tunnel monitoring
IPHost Network Monitor offer an easy way of SNMP monitoring your Netscreen Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for NETSCREEN-VPN-MON-MIB
- nsVpnMonTable
- A list of active VPN tunnel entries.
- nsVpnMonEntry
- A VPN tunnel entry containing attributes for both IKE Phase 1 and Phase 2 as well as associated policy
- nsVpnMonIndex
- A unique value for each active VPN tunnel. Its value ranges between 1 and 65535 and may not be contigous. Due to the dynamic nature of active VPN tunnels, the index has no other meaning but a pure index
- nsVpnMonInPlyId
- The incoming policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
- nsVpnMonOutPlyId
- The outgoing policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
- nsVpnMonVpnName
- A textual string containing information about the VPN entity from which this tunnel was derived.
- nsVpnMonVsysName
- A textual string containing information about the Virtual system to which this tunnel belongs. This applies to NetScreen 1000
- nsVpnMonTunnelType
- Protocol type used for the tunnel
- nsVpnMonEspEncAlg
- a value which identifies a particular algorithm to be used to provide secrecy protection for ESP.
- nsVpnMonEspAuthAlg
- The ESP Authentication Algorithm used in the IPsec.
- nsVpnMonAhAlg
- a value which identifies a particular algorithm to be used to provide integrity protection for AH.
- nsVpnMonKeyType
- a value which identifies a key exchange protocol to be used for the negotiation
- nsVpnMonP1Auth
- a value which identifies Phase 1 authentication method
- nsVpnMonVpnType
- The type of this VPN tunnel, either a dialup or site-to-site
- nsVpnMonRmtGwIp
- The peer Gateway's IP address
- nsVpnMonRmtGwId
- The peer Gateway's ID
- nsVpnMonMyGwIp
- The local Gateway's IP address
- nsVpnMonMyGwId
- The local Gateway's ID
- nsVpnMonOutSpi
- The SPI for outgoing packets
- nsVpnMonInSpi
- The SPI for incoming packets
- nsVpnMonMonState
- The monitoring status, if it is on, an icmp ping will be sent over the tunnel periodically to test the conntivity and latency
- nsVpnMonTunnelState
- The current tunnel status determined by the icmp ping if The monitoring status is on.
- nsVpnMonP1State
- The IKE's Phase 1 status
- nsVpnMonP1LifeTime
- an active Phase 1 sa's time left before re-key. -1 means unlimited lifetime.
- nsVpnMonP2State
- The IKE's Phase 2 status
- nsVpnMonP2LifeTime
- an active Phase 2 sa's time left before re-key. -1 means unlimited life time.
- nsVpnMonP2LifeBytes
- an active Phase 2 sa's bytes left before re-key. -1 means unlimited life bytes.
- nsVpnMonDelayAvg
- a kind of rolling average of latency, in milliseconds. -1 has no meaning here, which means nsVpnMonDelayAvg has not been calculated yet.
- nsVpnMonDelayLast
- latency in last sample, in milliseconds. -1 means either vpn tunnel is inactive or vpn tunnel monitor is not turned on.
- nsVpnMonAvail
- percentage over 30 samples
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
