ONS15501-MIB Download

ons15501SysDevFlash1Image

Gives the name of the software programmed on flash bank one.

ons15501SysDevFlash2Image

Gives the name of the software programmed on flash bank two.

ons15501SysDevFlash3Image

Gives the name of the software programmed on flash bank three.

ons15501SysSwDownload

Used to control the image download to the flash banks. NOTE: Read on this attribute returns the last t/ftp command, without login/password. For s/w release 4.0 and above, the value read back includes the Kilo-Bytes downloaded for last download command. It ...

ons15501SysDevActiveImage

Show currently active image's bank number. This may be different from ons15501SysConfiguredActiveImage, if a. The image on ons15501SysConfiguredActiveImage did not boot properly. b. User chose another bank during bootup, using the serial console port. ::= ...

ons15501SysSwDownloadStatus

Denotes the FTP/TFTP status. Please refer to the description of Ons15501ImageDnLoadStatus for a list of supported values

ons15501SysConfiguredImage

Set/Show configured value for flash-bank number to be used on reboot. A set on this attribute will result in a reboot of the system. To restart the system, write back the same value as the one read from it (or from ons15501SysDevActiveImage).

ons15501CLEICode

This attribute represents the CLEI (Common Language Equipment Identifier) code for the ONS15501.

ons15501PrimaryNTP

The IP address for the primary NTP server.

ons15501SecondaryNTP

The IP address for the secondary NTP server.

ons15501NTPAdminStatus

The configured administrative status for NTP.

ons15501NTPOperationalStatus

The operational status for NTP.

ons15501ActiveSoftwareVer

This attribute provides the active software version. This will be same as the entPhysicalSoftwareRev for the entry corresponding to the chassis.

ons15501LastConfigChangeTime

The value of sysUpTime when last configuration change was done. NMS may use this information to synchronize if some configuration has changed on the unit.

ons15501InRemoteInfoUpdateTime

This attribute gives the time-stamp when one or more of ons15501InRemoteChassisName, ons15501InRemotePortName, or ons15501InRemoteAgentIpAddr was changed. NMS may use this information to find the latest information if data from remote unit does not match ...

ons15501InRemoteChassisName

Manager initialized string value to identify the chassis associated with remote connection for optical input. ons15501InRemoteChassisName would be a ZERO length string if the input link is disabled. To disable the input link details set ons15501InRemoteCh ...

ons15501InRemotePortName

Manager initialized string value to identify the the port (on remote chassis) associated with remote connection for optical input. ons15501InRemotePortName would be a ZERO length string if the input link is disabled. To disable the input link details set ...

ons15501InRemoteAgentIpAddr

Manager initialized string value to identify the network address to be used to reach the SNMP agent entity containing information about the port and chassis providing optical input. ons15501InRemoteAgentIpAddr would be a 0.0.0.0 if the input link is disab ...

ons15501OutRemoteInfoUpdateTime

This attribute gives the time-stamp when one or more of ons15501OutRemoteChassisName, ons15501OutRemotePortName, or ons15501OutRemoteAgentIpAddr was changed. NMS may use this information to find the latest information if data from remote unit does not mat ...

ons15501OutRemoteChassisName

Manager initialized string value to identify the chassis associated with remote connection for optical output. ons15501OutRemoteChassisName would be a ZERO length string if the output link is disabled. To disable the output link details set ons15501OutRem ...

ons15501OutRemotePortName

Manager initialized string value to identify the the port (on remote chassis) associated with remote connection for optical output. ons15501OutRemotePortName would be a ZERO length string if the output link is disabled. To disable the output link details ...

ons15501OutRemoteAgentIpAddr

Manager initialized string value to identify the network address to be used to reach the SNMP agent entity containing information about the port and chassis using optical output. ons15501OutRemoteAgentIpAddr would be a 0.0.0.0 if the output link is disabl ...

ons15501SysAlarmStatus

Provides the highest severity alarm currently active.

ons15501SysDateAndTime

The date and time of the System. The write will not succeed if the administrative state for NTP (ons15501NTPAdminStatus) is 'enabled'. Setting this attribute will autmatically change values for ons15501TrapLogEntryDateAndTime and ons15501ActAlarmDateAndTi ...

ons15501LastTrapIndex

The value of ons15501TrapLogEntryIndex, used while logging the most recent trap. Goes back to 1, after reaching the max value. The trap log table is a circular list with the most recent entry at index given by this attribute. On restart of the unit, the v ...

ons15501TrapLogTable

Table for last N traps (N = 100 in most cases). Please refer to ons15501LastTrapIndex for details on how this table is organized.

ons15501TrapLogEntry

Entry for a trap

ons15501TrapLogEntryIndex

index field for this entry. Actual range at run time is ons15501TrapCounter to ons15501TrapCounter - N + 1 or 1 (whichever is higher)

ons15501TrapLogEntryTrapType

The type of trap. See the definition of Ons15501TrapTypeEnumeration for possible values.

ons15501TrapLogEntryDirection

Whether the trap is being asserted or cleared. Please note that some traps don't have a direction. (e.g. configuration changed).

ons15501TrapLogEntryTimeStamp

The value of sysUpTime when the entry was placed in the log.

ons15501TrapLogEntryDateAndTime

The local date and time at which the entry was placed in the log.

ons15501TrapLogEntryPhyIndex

Provides entPhysicalIndex value for the physical entity corresponding to the trap entry.

ons15501TrapLogEntrySeverity

Provides the severity level corresponding to this trap entry.

ons15501ActiveAlarmTable

Table for currently active alarm conditions. This table is effectively the list of traps that have been asserted but not cleared.

ons15501ActiveAlarmEntry

Entry for an active alarm condition. For each alarm condition present on the equipment, there would be an entry in the table.

ons15501ActAlarmType

Index field for ons15501ActiveAlarmTable. Presence of an entry implies that the specific alarm type is active on the unit.

ons15501ActAlarmTimeStamp

The time since when the alarm is active.

ons15501ActAlarmDateAndTime

The local date and time since when the alarm is active

ons15501ActAlarmPhyIndex

Provides entPhysicalIndex value for the physical entity corresponding to the alarm entry.

ons15501ActAlarmSeverity

Provides the severity level corresponding to this alarm entry.

ons15501TrapDescriptionTable

Table for mapping the Ons15501TrapTypeEnumeration values to their textual information.

ons15501TrapDescriptionEntry

Entry for textual information about traps.

ons15501TrapTypeValue

Index field for this entry.

ons15501TrapDescription

The textual information corresponding to the ons15501TrapTypeValue.

ons15501TrapSeverity

Provides the default severity level corresponding to the ons15501TrapTypeValue.

ons15501InputOpticalPower

The optical power being fed into the Amplifier.

ons15501InputOpticalPowerMean

Mean value for input optical power. If the input optical power falls below the mean value by more than trigger (see ons15501InputOpticalPowerTrigger) an alarm is generated. The alarm is cleared when the input optical power is back within 90% of trigger fr ...

ons15501InputOpticalPowerTrigger

Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not cleared until the input optical power falls back within 90% of the trigger value from the mean. Please also refer to ons15501I ...

ons15501OutputOpticalPower

The measured value for raw optical power being generated at the output of the Amplifier.

ons15501OutputSignalPower

The optical signal power at the output of the Amplifier. The value of this attribute triggers the alarm, based on mean value and trigger as defined by ons15501OutputSignalPowerMean and ons15501OutputSignalPowerTrigger. This value is internally calculated ...

ons15501OutputSignalPowerTrigger

Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not cleared until the output signal power falls back within 90% of the trigger value from the mean. Please also refer to ons15501O ...

ons15501ConfigOpticalGain

The configured value for power gain.

ons15501OpticalPowerGain

The measured value for power gain. This value does not include the amplification noise that is significant for low input signals.

ons15501GainTrigger

The gain deviation allowed from the configured gain before an alarm is asserted. The alarm is not cleared, until measured gain(ons15501OpticalPowerGain) is back within 90% of ons15501GainTrigger from configured gain (ons15501ConfigOpticalGain).

ons15501PowerSupply1Level

The voltage fed through power supply 1. The value of the attribute is 10 times the the value in volts.

ons15501PowerSupply2Level

The voltage fed through power supply 2. The value of the attribute is 10 times the the value in volts.

ons15501LaserStatus

Gives the status of the laser pumps.

ons15501DevAmbTemp

The ambient temperature for the device.

ons15501DevAmbTempMean

Mean value for temperature. If the temperature falls below (or goes above) the mean value by more than trigger level (see ons15501DevAmbTempTrigger) an alarm is generated. The alarm is cleared when the temperature is back within 90% of trigger value, from ...

ons15501DevAmbTempTrigger

Please refer to ons15501DevAmbTempMean above. Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not cleared until the temperature falls back within 90% of the value.

ons15501PowerSupply1Status

Gives the status of power supply one.

ons15501PowerSupply2Status

Gives the status of power supply two.

ons15501SysInfoGroup

The basic group defines objects which are common to all Embedded Linux product series of Synchronous equipment.

ons15501TrapLogGroup

The trap attribute group provides the trap logs. These attributes are also used in trap notifications.

ons15501ActiveAlarmGroup

The alarm attribute group provides the list of active alarms

ons15501TrapDescriptionGroup

The trap description attribute group provides the mapping from trap type to textual information about the trap.

ons15501FinalAttrGroup

The ons15501 group of attributes models the parameters in the EDFA.

ons15501CoreAttrGroup

The ons15501 group of attributes models the parameters in the EDFA. The power supply related attributes are not part of this group.

ons15501PowerSupplyStatusGroup

The ons15501 group of attributes models the status of power supplies. The support for status was introduced in version 4.0.

ons15501PowerSupplyLevelGroup

The ons15501 group of attributes provides the voltage level of power supplies. It is available only for DC series of ONS15501.

ons15501SysInfoGroup2

The basic group defines objects which are common to all Embedded Linux product series of Synchronous equipment.