PROMINET-MIB

PROMINET-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Avaya network devices.

OID list for PROMINET-MIB

promAgentMIBVersion
The version of the Lucent Cajun Switch MIB that this agent supports.
promAgentMgrIndex
The value of this object represents the index into the community table that is used to authenticate SNMP requests for this manager.
promCommunityTable
promCommunityEntry
promCommunityIndex
An index that uniquely identifies this entry.
promCommunityString
The community string included in the SNMP PDU used for authentication purposes.
promCommunityAddressType
The type of address associated with this community. If set to any(1), only the community string is authenticated.
promCommunityAddress
If the address type is any, then the value of this object is a null string. If the type is ipv4(2), then this value represents a 4 byte IP address.
promCommunityAccess
The MIB access supported for this community entry. A Get or GetNext SNMP PDU is authenticated if the value of this object is read-only(2) or read-write(3). A Set request will be honored if the value of this object is read-write(3). If more granular acces ...
promCommunityTrapReceiver
If set to enable(1), this community entry is considered a trap receiver. When the agent generates an SNMP trap, a copy will be sent to this host using this community string.
promCommunitySecurityLevel
Secure tables are only accessible from users with security clearance. For example, this table (the community table) is only accessible by parties that have the security clearance.
promCommunityStatus
promAgentWebServerURL
The URL of where the document server software is installed. The switch uses this location to find online help and bimapped graphics. Enter the host name or IP address of the HTTP server at the HTTP Server Location prompt, followed by ':2010'. For example ...
promAgentWebServerHelpDirectory
The subdirectory that contains the help files on the document server. Typically, this directory is 'help'.
promChassisType
The model of the chassis that this agent is managing.
promChassisSlots
The number of slots available in this chassis. If this chassis is a stackable chassis, the total capacity of stacking units.
promInventoryTable
A table of inventory information.
promInventoryEntry
Inventory information related to this device.
promInventoryResourceType
The resource class of this inventory item.
promInventoryResourceIndex
The resource identifier of this inventory item.
promInventoryModelNumber
The model number of this device.
promInventorySerialNumber
The serial number of this device.
promInventoryVersion
The revision number of this device.
promInventoryManufactureInfo
Information related to the manufacturing of this device.
promInventoryScratchPad
A scratch pad area available for keeping user-supplied inventory information.
promPowerSupplyTable
A table of information related to each power supply in the system.
promPowerSupplyEntry
An entry providing information about a particular power supply in the system.
promPowerSupplyIndex
An index that uniquely identifies this power supply. This index corresponds to the promResourceIndex of the power supply type resource.
promPowerSupplyType
An enumerated integer describing the type of power supply.
promPowerSupplyStatus
The status of this power supply. Okay(1) indicates the power supply is operating properly. Faulty(2) indicates that the power supply is not functioning properly. In this case, more information can be determined from the other power supply attributes.
promPowerSupplyInputStatus
The status of the input power feed (e.g. the AC power cord) to this power supply.
promPowerSupplyOutputStatus
The status of the output power from this power supply.
promPowerSupplyOutputCapacity
The total capacity of power supplied by this supply in Watts.
promPowerCapacity
The total capacity (in Watts) of power available (currently) in the system.
promPowerUsed
The total power (in Watts) currently being consumed in the system.
promPowerControlTable
This table manages the power attributes associated with each module.
promPowerControlEntry
An entry in the power control table manages the power attributes of the specified module.
promPowerControlUsed
The total power (in Watts) used by this module.
promPowerControlPriority
The priority of this module to be considered in the event of a power supply failure where the amount of power used exceeds the system capacity. Low priority modules will be powered down before higher priority modules.
promPowerControlMode
Normally, a module power mode is enable(1). In the event of a power supply failure resulting in a power shortage, or in the event of this module being inserted without enough available power, the mode will be poweredDown(3). Setting this object to the ...
promTempTable
A table of information related to the temperature within the system.
promTempEntry
An entry providing temperature information related to a specific temperature probe in the system.
promTempIndex
A unique index that identifies this temperature probe. This index corresponds to the promResourceIndex for temperature probe type resources.
promTempValue
The current temperature reading of this temperature probe in degrees Celsius.
promTempUpperLimit
The upper temperature limit of this temperature probe in degrees Celsius.
promTempUpperWarning
The upper temperature warning of this temperature probe in degrees Celsius.
promTempLowerWarning
The lower temperature warning of this temperature probe in degrees Celsius.
promTempLowerLimit
The lower temperature limit of this temperature probe in degrees Celsius.
promModuleTable
A table of information related to the modules in the system.
promModuleEntry
Attributes related to managing this module.
promModuleIndex
An index that uniquely identifies this module. This index corresponds to the promResourceIndex associated with module type resources.
promModuleName
A user-assignable name for this module.
promModuleType
An enumerated integer that is unique for each module model.
promModuleBaseType
The base type of this module. This object is used to describe the core functions of the module. Often, base designs are derived into multiple module types which are typically just packaging variations (e.g. changing the connector types). The value of ...
promModuleSlotWidth
The number of slots that this module occupies.
promModuleSlotOffset
The slot offset (one based) that identifies, along with the slot width and slot location, the actual slots that this module occupies. The offset identifies which slot within the width of the module that this module reports as its slot number.
promModulePorts
The total number of ports associated with this module.
promPortTable
A table of information related to every data port in this data networking system.
promPortEntry
A data port associated with this data networking system.
promPortIndex
An index that uniquely identifies this port. Typically, ports are child resources of the module that contains them. In these cases, ports are identified by their module and their relative physical position on that module.
promPortName
The user-assigned name for this port. Note that setting this object for an internal(1) port results in an error.
promPortType
An internal(1) port does not have an external connection. An ether-ten-oneHundred(2) port is an Ethernet port which can be switched between 10 and 100 megabits per second. An ether-oneHundred(3) port is a 100 megabits per second Fast Ethernet port. An eth ...
promPortBaseType
The base type of this port. This object may be useful to help manage new port types that are similar in nature to legacy port types.
promPortMode
The mode of this port. When set to enable(1), this port passes data. When set to disable(2), the port does not receive or transmit data, nor does it generate port-level signaling e.g. link integrity pulses. Note that setting an internal(1) port to disabl ...
promPortStatus
The status of this port. Disabled(1) means that this port has been disabled through management action. Okay(2) indicates that this port is operating properly. Warning(3) indicates that this port is encountering an abnormal condition that, however, allo ...
promPortConnector
The connector type associated with this port.
promPortSpeedState
The data rate of this port in bits per second. For example, a standard Ethernet port (e.g. 10BASE-T) would indicate a value of ten-megabits-per-second((1) indicating that the port supports a data rate of 10Mb/s. For ports that can change their data rate ...
promPortDuplexState
The value of this object indicates whether this port is operating in full- or half-duplex mode. The value under-negotiation(3) indicates that the port has not selected an operational duplex setting yet.
promPortGroupBinding
Each port is associated with a port group. Typically, a port will belong to a port group of one and the value of this object will be the same as the port index for this instance. That is, this port will point to itself. The intent of this object is to h ...
promPortFlowControlState
The value of this object indicates whether this port is operating using flow control. The value under-negotiation(3) indicates that the port has not selected an operational flow control setting yet.
promPortFlowControlTable
A table of ports that support flow control.
promPortFlowControlEntry
Configuration objects related to port based flow control.
promPortFlowControlMode
Flow control is used to prevent or reduce the dropping of frames due to the lack of buffer space. Overall, networks are more efficient when a sending station is asked to pause in its sending process, rather than having the transmitted frames dropped. Flo ...
promPortDuplexTable
A table of ports that support full- and half-duplex data communications.
promPortDuplexEntry
A port device configuration that controls the duplex mode of this port.
promPortDuplexMode
A point-to-point Ethernet port may be configured to support half or full duplex communications. A full-duplex(2) port transmits and receives data concurrently, effectively doubling the data rate of the port. Half-duplex(1) ports transmit or receive data, ...
promPortSpeedTable
A table of port devices that support multiple speeds.
promPortSpeedEntry
A port that supports multiple speeds.
promPortSpeedMode
Some of these values may not be applicable to certain types of ports. This object indicates the desired data rate of this port. If auto-negotiation is turned on for this port, then this value is ignored.
promPortAutoNegotiationTable
A table of ports that support auto-negotiation.
promPortAutoNegotiationEntry
Attributes associated with a port that supports auto-negotiation.
promPortAutoNegotiationMode
Setting this object to autoNegotiate(1) causes this port to negotiate the duplex mode and the port speed, subject to the port's capabilities.
promPortAutoNegotiationSpeedAdvertisement
The speed to advertise while auto-negotiating.
promPortAutoNegotiationDuplexAdvertisement
The duplexity to advertise while auto-negotiating.
promPortAutoNegotiationFlowControlAdvertisement
The flow control capability to advertise while auto-negotiating.
promPortRateLimitTable
A table of ports that support the ability to limit the rate of floods.
promPortRateLimitEntry
The rate limit configuration associated with this port.
promPortRateLimitMode
This object configures whether rate limiting is enabled for this port (the factory default is enable(1)). Enabling rate limiting for this port prevents floods from overwhelming the output buffer associated with this port. Normally, rate limiting will onl ...
promPortRateLimitRate
The percentage of the port's transmitted data allowed to be floods (or floods and known multicasts). For example, the factory default setting of twenty-percent(4) indicates that 20% of the data rate can be floods. For 10 Mb/s ports, this is equivalent t ...
promPortRateLimitBurstSize
The maximum number of consecutive transmitted flooded (or flooded and known multicasted) packets. Typically, the burst size is set so as to not overflow the port's buffer.
promPortPacePriorityTable
A table of ports that support the ability to classify frame priority based on 3Com Pace(r) Prioritization.
promPortPacePriorityEntry
A port that supports 3Com Pace(r) priority.
promPortPacePriorityMode
When Pace priority is enabled, this port will detect frames that use 3Com Corporation's Pace(r) Priority signaling. Frames signaled with priority in this manner are mapped to traffic priority level 4 (on scale of 0-7).
promPortCategoryTable
A table of ports that support the port category feature. Currently, all ports support this capability.
promPortCategoryEntry
A port that supports port categorization.
promPortCategoryMode
By default, all ports are considered service ports. A service port is a port that provides a networks service such as a connection to a server, other switches, or the like. A service port will trigger the service port event for status changes with the a ...
promPortRemoteFaultTable
A table of ports that support the ability signal a (pre-standard) remote fault to a far-end interface using proprietary messages.
promPortRemoteFaultEntry
A port that supports pre-standard remote fault detection.
promPortRemoteFaultDetect
When remote fault detection is enabled, this port will transmit a 'remote fault present' control frame to its peer interface when it detects a link failure. It will periodically send the control frame until the link failure clears, at which time it will ...
promBufferTable
A table of frame buffers in the system.
promBufferEntry
Objects related to the management of this frame buffer.
promBufferIndex
The unique index that identifies this buffer within the system. Buffers are indexed first by their module association and then a unique index within that module.
promBufferFabricPort
The switch fabric port associated with this buffer.
promBufferFabricPortDirection
The value of this object indicates whether the buffer is used for buffering frames going into the switching fabric or coming out of the fabric.
promBufferSwitchPort
The switch port associated with this frame buffer. Some buffers are not associated with any one switch port. In those cases, the value of the resource ID returned will be the null resource ID.
promBufferMemory
The amount of memory available for frame buffering in Kilobytes (KB).
promBufferAgeTimer
Configures the timer used for aging frames in this buffer. If the timer expires for a frame, the frame is dropped and the event is counted in the stale drop counter. By default, the age timer is set to a 0.25 seconds (quarter of a second). The actual ti ...
promBufferPriorityServicing
The value of this object configures how often the normal priority queue is serviced relative to the high priority queue. By default, the normal priority queue is serviced every thousand frames(3). This means that the normal priority queue is guaranteed ...
promBufferPriorityAllocation
This object controls how much of the total buffer space should be allocated to high priority queue. Please be warned that setting this object to a different value causes the associated buffer to reset, causing a short loss of data. Setting the value of t ...
promBufferPriorityThreshold
This object configures the threshold for which frames are considered high priority. Frames may have a priority classification ranging from 0-7, 7 being the highest. By default, every frame that has priority 4 (four(5)) or above is considered a high prio ...
promBufferCongestion
This object indicates whether this buffer is in a congested state..
promBufferHighOverflowDrops
The count of the number of high priority frames dropped due to the high priority queue overflowing.
promBufferLowOverflowDrops
The count of the number of low priority frames dropped due to the low priority queue overflowing.
promBufferHighStaleDrops
The count of the number of high priority frames dropped due to being in the high priority queue too long (the frame aged out).
promBufferLowStaleDrops
The count of the number of low priority frames dropped due to being in the low priority queue too long (the frame aged out).
promBufferCongestionDrops
The count of the number of frames dropped due to the destination (output) buffer being congested.
promSwitchSTPConfig
When set to ieee8021dStp(1), the switch executes spanning tree conformant to the IEEE 802.1D bridging standard. The switch runs one instance of spanning tree. When set to stpPerVlan(2), the switch executes a separate instance of spanning tree for each vi ...
promSwitchAgingTime
The timeout period in seconds for aging dynamically learned forwarding information. A default of 300 seconds is recommended. An aged entry is marked invalid, but is not removed from the Address Forwarding Table, because it is assumed that it will be rele ...
promSwitchSuperAgingTime
The timeout period in days for removing stale invalid entries from the Address Forwarding Table. A superaged entry is removed completely from the Address Forwarding Table, because it is assumed that the entry will never be relearned.
promBridgeTable
A table of Spanning Tree information for every bridge in the system.
promBridgeEntry
promBridgeIndex
An index that uniquely identifies this bridge.
promBridgeType
Indicates whether this is a legacy dot1d bridge consisting of all switch ports or a virtual bridge consisting of all virtual subports for a particular Vlan.
promBridgeMode
Used to enable or disable Spanning Tree for this bridge. When set to disable(2), all BPDUs are forwarded like regular multicast packets. The default value is enable(1).
promBridgeStatus
The enable/disable status of this bridge. This object incorporates the setting of the promSwitchSTPConfig object. When promSwitchSTPConfig is set such that this bridge will not be active, promBridgeStatus returns disabled(2). If promSwitchSTPConfig is ...
promBridgeStpPriority
The priority value of the Bridge Identifier. See dot1dStpPriority.
promBridgeStpTimeSinceTopologyChange
The time since the last topology change was detected. See dot1dStpTimeSinceTopologyChange.
promBridgeStpTopChanges
The total number of topology changes. See dot1dStpTopChanges
promBridgeStpDesignatedRoot
The bridge considered to be root by this node. See dot1dStpDesignatedRoot.
promBridgeStpRootCost
The cost of the path to the root from this node. See dot1dStpRootCost.
promBridgeStpRootPort
The port number with the lowest cost path to the root bridge. See dot1dStpRootPort.
promBridgeStpMaxAge
The maximum age used by this bridge to hold onto STP information before discarding. See dot1dStpMaxAge.
promBridgeStpHelloTime
The amount of time between configuration BPDUs. See dot1dStpHelloTime.
promBridgeStpHoldTime
The time value that indicates the interval during which no more than two configuration BPDUs will be sent by this node. See dot1dStpHoldTime.
promBridgeStpForwardDelay
The amount of time that this node stays in each of the Listening and Learning states. See dot1dStpForwardDelay.
promBridgeStpBridgeMaxAge
The value of MaxAge when this bridge is the root. See dot1dStpBridgeMaxAge.
promBridgeStpBridgeHelloTime
The value of HelloTime to use when this bridge is the root. See dot1dStpBridgeHelloTime.
promBridgeStpBridgeForwardDelay
The value of FowardDelay to use when this bridge is the root. See dot1dStpBridgeForwardDelay.
promBridgePortTable
A table of Spanning Tree information for every port that supports Spanning Tree in every bridge in the system
promBridgePortEntry
promBridgePortIndex
An index that uniquely identifies this bridge port. This index corresponds to the promResourceIndex for bridge port type resources.
promBridgePortPriority
The value of the priority field in the port ID. See dot1dStpPortPriority. The default value is 128.
promBridgePortState
The port's current state as defined by the Spanning Tree Protocol. See dot1dStpPortState. The virtual port is considered broken if its switch port is blocked.
promBridgePortEnable
The enabled/disabled status of this port. See dot1dStpPortEnable. The default is enabled(2).
promBridgePortPathCost
The contribution of this port to the path cost of the paths towards the spanning tree root. See dot1dStpPortPathCost. The default value is dependent on the port speed, trunking mode, and duplexity.
promBridgePortDesignatedRoot
The bridge recorded as root for this port's segment. See dot1dStpPortDesignatedRoot.
promBridgePortDesignatedCost
The path cost of the designated root of the segment connected to this port. See dot1dStpPortDesignatedCost.
promBridgePortDesignatedBridge
The bridge identifier of the bridge that is considered the designated bridge for this port's segment. See dot1dStpPortDesignatedBridge.
promBridgePortDesignatedPort
The port identifier of the port on the Designated Bridge for this port's segment. See dot1dStpPortDesignatedPort.
promBridgePortForwardTransitions
The number of times this port has transitioned from the learning state to the forwarding state. See dot1dStpPortForwardTransitions.
promBridgePortFastStart
This object is being replaced by the switch port object promSwitchPortFastStart. When this bridge port object is set to enable(1), the bridge port and all other bridge ports on the same switch port, transition right from blocking to forwarding, skipping t ...
promBridgePortSetDefault
When set to setDefault(2), the promBridgePortPriority, promBridgePortEnable, and promBridgePortPathCost will be set to the factory default values.
promBridgePortEnableChangeDetection
When this object is set to enable(1), a Topology Change Notification will be generated when this port goes to Blocking or Forwarding (if the port is a designated port). When set to disable(2), no Topology Change Notification will be generated for this po ...
promL2AddressTable
A table of address table entries. The address table is used by the bridging function to perform forwarding and filtering decisions. An address may appear multiple times in different entries corresponding to the different logical address tables.
promL2AddressEntry
A particular address table entry.
promL2AddressIndex
An index that uniquely identifies this address entry.
promL2AddressTableIndex
The address table that this entry is associated with.
promL2AddressMacAddress
The IEEE 802 MAC Address associated with this database entry.
promL2AddressPortBinding
The switch port that this address is associated with.
promL2AddressBindingValid
The port binding of an address entry is aged out in conformance with the specifications laid out in the IEEE 802.1D standard. When the address is aged out, the port binding becomes invalid.
promL2AddressVlanID
The VLAN ID of the VLAN that this address entry corresponds to.
promL2AddressPriority
If set to high(2), frames destined to this address are classified with priority value 4.
promL2AddressForward
When set to specialDelivery(2), frames sent to this address are treated to special delivery where the spanning tree state of the inbound port is ignored. Typically, special delivery is only used for Bridge PDUs such as spanning tree frames.
promL2AddressCopy
It is sometimes useful for the switch processor to eavesdrop on traffic to certain destinations. This is especially useful in supporting the intelligent multicasting function.
promL2AddressPersistence
This object indicates the persistence of this entry: other(1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - Writing this value to the object removes the corr ...
promL2AddressStatus
This object indicates the status of the entry: other(1) - None of the following. learned(2) - This entry was learned dynamically. self(3) - The value of the corresponding instance of promAddressMacAddress represents one of the bridge's addresses. mgmt(4) ...
promL2AddrSummaryTable
This summary table packs the address entries in the address database into summary objects. The goal is to optimize the upload of the large amount of data stored therein. Typically, a management station would use getNext requests to retrieve the next logi ...
promL2AddrSummaryEntry
A summary object that packs as many address entries possible into a summary object.
promL2AddrSummary
The value of this object is a packed opaque structure representing an array of address entries. The format of this structure is: struct L2AddressEntry { UNS32 index; UNS8 addr[6]; // mac address UNS8 fabricPort; //fabricPort and subPort == promL2A ...
promL2AddressControlTable
This table provides the network manager the ability to create new, static address entries. Entries added through this table are added to the specified address table as a static entry and are save in non-volatile memory for reconfiguration upon system res ...
promL2AddressControlEntry
A control entry enables this manager to add a new entry to the specified address table. When the entry is written to, the control index value is reset to 0. When the actual entry is created, the index value will read as non-zero, reporting the actual en ...
promL2AddressControlIndex
The index of the address entry that was created for this address.
promL2AddressControlMacAddress
The IEEE 802 MAC Address associated with this database entry.
promL2AddressControlPortBinding
The port to bind this address to.
promL2AddressControlVlanID
The VLAN ID of the VLAN to bind this address to.
promL2AddressControlPriority
If set to high(2), frames destined to this address are classified with priority value 4.
promL2AddressControlPersistence
The persistence of the entry to be created: permanent(1) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are sto ...
promL2AddressControlStatus
The status of an entry to be created. When adding an entry all fields will be set, and then the control status is set to createRequest(1), indicating that the entry is to be created. During creation, the status will be underCreation(2). If the creation ...
promL2AddressChangeLast
The index of the last entry written to the address change table
promL2AddressChangeWraps
The count of the number of times the address change table has wrapped.
promL2AddressChangeMaxEntries
The maximum number of entries in the address change table.
promL2AddressChangeTable
.
promL2AddressChangeEntry
The address change table provides a quick way of getting only the entries that have recently changed. Since entries age out as part of the normal switching process, entries that have aged (i.e. their destination bindings are no longer valid) are not cons ...
promL2AddressChangeWrapCount
The number of times that the promAddressChangeLastIndex had wrapped when this entry was added.
promL2AddressChangeIndex
The index that uniquely identifies this address change entry.
promL2AddressChangeIndexChanged
The address entry that changed. The value of this object corresponds to the promL2AddressIndex object.
promL2AddressChangeSummary
The structure is interpreted in the following manner:
promSwitchPortTable
promSwitchPortEntry
promSwitchPortIndex
A unique index that identifies this switch port. The value of this index corresponds to the value of the promResourceIndex for switch ports.
promSwitchPortSTAPMode
Disabling spanning tree on a switch port prevents the switch port from participating in the spanning tree process. When disabled(2), this port will neither generate BPDUs, nor process received BPDUs. Also, the port will always start in the forwarding st ...
promSwitchPortConvertToStatic
When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of the static address table. Typically, this object will be used to perform a crude form of address database update where the addre ...
promSwitchPortLearningMode
Disable learning on a bridge port to prevent new addresses from being added to the address database. Used in combination with static (permanent) address entries, disabling address learning is an effective security feature to prevent new hosts from appear ...
promSwitchPortHuntGroup
Hunt groups provide the capability to logically bind multiple switch ports into one switch port. This provides a way of balancing the load of multiple links between like-configured switches. Care must be taken to configure the hunt groups properly to pre ...
promSwitchPortPhysicalPort
The physical port resource bound to this switch port.
promSwitchPortKnownMode
Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames. This mode greatly enhances the efficiency of the port's output buffer since space is not wasted for frames not meant for th ...
promSwitchPortMappingMethod
The frame mapping method of this switch port. When set to port-based(1) (the factory default), all non-tagged frames are classified to the VLAN associated with this switch port.
promSwitchPortTrunkingMode
The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format: Clear: Ethernet or IEEE 802.3 frame format. This is the default. IEEE 802.1Q: The original frame with a new Ether ...
promSwitchPortVlanBindingMethod
The VLAN binding method of a switch port specifies the way in which the port can be a member of the egress lists of VLANs other than the port default VLAN specified by promSwitchPortVlanID: static: A Virtual Switch Port must be statically created for ...
promSwitchPortIgnoreTag
Each switch port is capable of ignoring the VLAN Tag associated with a frame in a trunking format. When ignored, the tag is used as the default in the event that a VLAN classification based on the switch's policy(s) cannot be made. This feature is useful ...
promSwitchPortVlanID
When this switch port is configured in port-based VLAN mode, all non-tagged frames received on this port are bound to this VLAN. Otherwise, non-tagged frames are classified to this VLAN as the default if a VLAN binding cannot be otherwise determined. The ...
promSwitchPort3ComMappingTableIndex
The 3Com VLAN mapping table associated with this switch port. The default is 1, which indicates the default mapping table.
promSwitchPortAutoVlanCreation
Enabling auto VLAN creation for this switch port causes the port to dynamically create a VLAN whenever an IEEE 802.1Q or Multi-level tagged frame is received on the port with a tag value which does not correspond to a known VLAN. All switch ports with a ...
promSwitchPortMirrorMode
When set to enable(1), this object indicates that the port is defined as a mirror port through the promPortMirroringTable. A mirror port duplicates frames received at one or more source ports.
promSwitchPortIfIndex
Each switch port is associated with an interface. This object provides a mechanism to map switch ports to bridge ports.
promSwitchPortFastStart
When this object is set to enable(1), bridge ports on this switch port transitions right from blocking to forwarding, skipping the listening and learning states. The user should be warned that using the fast start feature greatly increases the likelihood ...
promSwitchPortVtpSnooping
When this object is set to enable(1), this switch port attempts to learn VLANs from a major networking equipment vendor if the switch port's trunking mode is IEEE 802.1Q Format or Multi-level Format. The factory default value for this object is enable(1).
promHuntGroupTable
promHuntGroupEntry
promHuntGroupIndex
An index that uniquely identifies this hunt group. This index corresponds to the value of promResourceIndex for resources of the hunt group type.
promHuntGroupName
promHuntGroupBasePort
The switch port index that serves as the base port for this hunt group. Each hunt group requires a base port. In lieu of a specific configuration, the hunt group will inherit the first switch port bound to the hunt group as its base port. The base port s ...
promHuntGroupNumberOfPorts
The current number of ports that belong to this hunt group.
promHuntGroupLoadSharing
promHuntGroupStatus
promPortMirroringTable
A table of port mirroring entries used to mirror traffic from a source port to a mirror port.
promPortMirroringEntry
Objects related to the PortMirroring functionality.
promPortMirroringIndex
The unique index that identifies this entry. This index consists of a switch fabric port and the index of a Packet Lookup Engine servicing this fabric port.
promPortMirroringSourceSubPort
The frame sampler source switch subport. The source port is the port from which received traffic will be mirrored. This object identifies the switch subport only, the switch fabric port is identified in promPortMirroringIndex. If set to 0, all subports ...
promPortMirroringSamplerType
The type for this frame sampler. When set to enable(1), every frame received on the source port(s) will be mirrored at the mirror port. When set to disable(2), no frames received on the source port(s) will be mirrored at the mirror port. When set to peri ...
promPortMirroringRate
Used in conjunction with promPortMirroringSamplerType to implement periodic sampling functionality. If promPortMirroringSamplerType is set to periodic(3), this object defines the number of packets/second that will be mirrored. If promPortMirroringSamplerT ...
promPortMirroringMirrorPort
The Switch Port on which frames received at source ports(s) will be duplicated. If no mirror port has been defined this object will return NULL.
promVlanTable
promVlanEntry
promVlanID
An identifier that is unique within the administrative domain. This ID is assigned by the management application and is meaningful within that context. This ID is used to identify VLANs when tagged using either the IEEE 802.1 frame format or the Multi-lev ...
promVlanName
A user-assignable name for this Vlan.
promVlanIfIndex
Each virtual LAN has a virtual interface associated with it. This enables RMON monitoring to occur per-VLAN. It also provides a handy mechanism to map virtual LANs to bridge ports by mapping them with the ifStack table from the Interface MIB.
promVlanAFTIndex
The address table used for this VLAN for explicitly tagged frames (frames received in a trunking frame format or from a port in port-based VLAN mode.) Normally, each VLAN maps to a unique address table. This is useful for environments with duplicate hos ...
promVlanBridgeIndex
The bridge resource which is bound to this Vlan.
promVlanStatus
The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(3) (indi ...
promVlanInitialHashTableSize
The initial hash table size used for MAC addresses on this VLAN. This attribute may only be set when promVlanStatus is set to createRequest(1). It must be a power of 2 between 16 and 8192, inclusive.
promVlanAutoIncrementHTSize
This attribute specifies whether or not the hash table size used for MAC addresses on this VLAN is automatically increased as necessary to hold more MAC addresses. This attribute may only be set when promVlanStatus is set to createRequest(1).
promVlanLearnStatus
This attribute indicates if the VLAN was learned. If learned it indicates if the VLAN was learned either by VTP or Auto VLAN creation.
prom3ComMappingTable
prom3ComMappingEntry
prom3ComMappingTableIndex
prom3ComMappingTableName
A user-readable name associated with this table.
prom3ComMappingTableStatus
The status of an entry to be created. When adding an entry all fields will be set, and then the status is set to createRequest(1), indicating that the entry is to be created. If the creation is successful, then the status will be set to active(3). Otherw ...
promVlan3ComMappingTable
promVlan3ComMappingEntry
promVlan3ComMappingIndex
The external tag of this 3Com VLAN.
promVlan3ComMappingVlanID
The VLAN ID of the VLAN that this 3Com tag is associated with.
promVlan3ComMappingStatus
The status of an entry to be created. When adding an entry all fields will be set, and then the status is set to createRequest(1), indicating that the entry is to be created. If the creation is successful, then the status will be set to active(3). Otherw ...
promVirtualSwitchPortTable
promVirtualSwitchPortEntry
An instance of a virtual switch port indicates that this switch port is a member of this VLAN.
promVirtualSwitchPortIndex
The Resource ID of the virtual switch port bound to the VLAN.
promVirtualSwitchPortFormat
Typically, a VLAN capable switch port has one of three modes: access, trunk, or hybrid. In access mode, the port sends frames in clear format (untagged). In trunk mode, all outbound frames are translated into the switch port's configured trunking format. ...
promVirtualSwitchPortBridgePort
The bridge port resource bound to this virtual port.
promVirtualSwitchPortBindingType
The method by which this switch port was bound to the VLAN. If the value is static(1), the binding was manually created by the administrator. If the value is persistent(2), the binding was created by the switch because the VLAN is the port-based VLAN for ...
promVirtualSwitchPortStatus
The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(2) (indi ...
promVirtualModulePortTable
promVirtualModulePortEntry
An instance of a virtual module port indicates that this module port is a member of this VLAN.
promVirtualModulePortIndex
The Resource ID of the virtual switch port bound to the VLAN.
promVirtualModulePortFormat
Typically, a VLAN capable switch port has one of three modes: access, trunk, or hybrid. In access mode, the port sends frames in clear format (untagged). In trunk mode, all outbound frames are translated into the switch port's configured trunking format. ...
promVirtualModulePortBridgePort
The bridge port resource bound to this virtual port.
promVirtualModulePortBindingType
The method by which this switch port was bound to the VLAN. If the value is static(1), the binding was manually created by the administrator. If the value is persistent(2), the binding was created by the switch because the VLAN is the port-based VLAN for ...
promVirtualModulePortModuleName
The name for this module.
promVirtualModulePortPortName
The name for this port.
promEventTable
Table of events currently supported.
promEventEntry
Attributes associated with the event.
promEventIndex
promEventMode
Disabling an event prevents this event from taking any actions when triggered. When set to enable to the console, the event will print the event information to the console serial port. The user can select whether to view log messages, trap messages or an ...
promEventLogAction
When enabled, this action will cause an event log entry to be created.
promEventTrapAction
When enabled, this event will cause an SNMP trap to be generated.
promEventConsoleAction
When enabled, this event will cause a message to printed to the console serial port.
promLogTableMaxSize
The maximum number of entries in the log table. Changing this value causes the existing log to be truncated and rebuilt.
promLogLastEntry
The log index of the last entry entered in the log.
promLogWraps
The number of times that the last entry has wrapped from 65K back to 1.
promEventLogTable
The log table for the events in the event table that are enabled for the Log Action.
promEventLogEntry
An entry in the log indicates information associated with a particular event.
promEventLogEventIndex
The index that uniquely identifies the event that caused this log entry.
promEventLogIndex
An index that uniquely identifies this log entry.
promEventLogTime
The value of sysUpTime when this event was triggered.
promEventLogDescr
The event log description.
promEventLogType
The type of event that caused this log entry.
promEventLogSeverity
The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure.
promEventLogDTM
The date and time when this log entry was made. The format is yy-Mon- dd hh:mm:ss, time is in 24 hour time.
promEventLogResType
The type of object (if provided) that triggered this event. If not provided, the value is equal to 'Invalid Resource'.
promEventLogResID
The instance of this resource (if provided - see promEventLogResType) that triggered this event.
promEventLogResLeaf
A number corresponding to the attribute associated with this resource and this event entry. It corresponds exactly to the leaf MIB number of the MIB that manages this resource. For example, if a port's mode changed, the configuration event log entry wou ...
promEventLogValueType
The data type associated with the log event value. This object indicates how to interpret the data stored in the event log value: - none(1) indicates no value returned. - integer32(2) - a 4 byte unsigned integer. - integer64(3) - an 8 byte unsigned inte ...
promEventLogValue
The value associated with the event encoded in an octet string. Refer to promEventLogValueType for how to interpret this value. The value encoded in this string is in Big Endian order.
promEventLogEpochTime
The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1 ...
promEventLogID
A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like.
promShutdownLogTableMaxSize
The maximum number of entries in the non-volatile log table. Changing the value of this object changes the maximum number of entries to be stored in Shutdown.
promShutdownLogLastEntry
The ID of the last entry made to the shutdown log.
promShutdownLogAcknowledged
This object is to set to acknowledged(2) the first time the Shutdown Log Table is accessed indicating that the Shutdown log has been read (at least once) since the system restarted.
promEventShutdownLogTable
A table of the last events logged before the system restarted.
promEventShutdownLogEntry
A log entry stored in non-volatile memory.
promEventShutdownLogEventIndex
The index that uniquely identifies the event that caused this ShutdownLog entry.
promEventShutdownLogIndex
An index that uniquely identifies this ShutdownLog entry.
promEventShutdownLogTime
The value of sysUpTime when this event was triggered. Note, the value corresponds to the sysUpTime when the system was last running (i.e. before it was shutdown.)
promEventShutdownLogDescr
The event ShutdownLog description.
promEventShutdownLogType
The type of event that caused this ShutdownLog entry.
promEventShutdownLogSeverity
The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure.
promEventShutdownLogDTM
The date and time when this ShutdownLog entry was made. The format is yy-Mon-dd hh:mm:ss, time is in 24 hour time.
promEventShutdownLogResType
The type of object (if provided) that triggered this event. If not provided, the value is invalid.
promEventShutdownLogResID
The instance of this resource (if provided) that triggered this event.
promEventShutdownLogResLeaf
To be provided.
promEventShutdownLogValueType
The data type associated with the ShutdownLog event value. This object indicates how to interpret the data stored in the event ShutdownLog value.
promEventShutdownLogValue
The value associated with the event encoded in an octet string.
promEventShutdownLogEpochTime
The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1 ...
promEventShutdownLogID
A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like.
promEventTrapEventIndex
The index that uniquely identifies the event that caused this trap.
promEventTrapTime
The value of sysUpTime when this event was triggered.
promEventTrapDescr
The event log description.
promEventTrapType
The type of event that caused this trap.
promEventTrapSeverity
The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure.
promEventTrapDTM
The date and time when this trap was sent. The format is yy-Mon- dd hh:mm:ss, time is in 24 hour time.
promEventTrapResType
The type of object (if provided) that triggered this event. If not provided, the value is equal to 'Invalid Resource'.
promEventTrapResID
The instance of this resource (if provided - see promEventTrapResType) that triggered this event.
promEventTrapResLeaf
A number corresponding to the attribute associated with this resource and this event entry. It corresponds exactly to the leaf MIB number of the MIB that manages this resource. For example, if a port's mode changed, the configuration event log entry wou ...
promEventTrapValueType
The data type associated with the trap event value. This object indicates how to interpret the data stored in the event trap value: - none(1) indicates no value returned. - integer32(2) - a 4 byte unsigned integer. - integer64(3) - an 8 byte unsigned in ...
promEventTrapValue
The value associated with the event encoded in an octet string. Refer to promEventTrapValueType for how to interpret this value. The value encoded in this string is in Big Endian order.
promEventTrapEpochTime
The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1 ...
promEventTrapID
A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like.
promAlarmGeneralActiveEntries
The total number of alarm entries in the triggered state currently in the alarm table.
promAlarmGeneralTimeStamp
The value of sysUpTime when any alarm state last changed (either triggering a new alarm or re-arming an old one).
promActiveAlarmTable
A table of all alarms in the triggered state.
promActiveAlarmEntry
An alarm in the triggered state.
promActiveAlarmIndex
The unique index that identifies this alarm.
promActiveAlarmName
The name of this alarm.
promActiveAlarmValueHigh
The high order 32 bits of the value that triggered this alarm.
promActiveAlarmValueLow
The low order 32 bits of the value that triggered this alarm.
promActiveAlarmVariable
The OID of the alarm variable if this is a user-created alarm (null otherwise).
promActiveAlarmResType
The resource type of this alarm if this is an internally created alarm.
promActiveAlarmResID
The resource identifier associated with this alarm if this is an internally created alarm.
promActiveAlarmLeaf
The leaf index of the MIB table used to manage this resource that is associated with this alarm, if this is an internally created alarm. For example, if this alarm was created to monitor a port's status, then the value of this object will be 6, correspo ...
promActiveAlarmOwner
This is the owner of the alarm.
promVtpSnoopingState
When this object is set to enable(1), the switch attempts to learn VLANs from a major networking equipment vendor on switch ports that have their VTP Snooping parameter set to enable(1). trunking mode is IEEE 802.1Q Format or Multi-level Format. The facto ...
promVtpSnoopingDomainName
The VTP Snooping Domain Name of the switch. A switch may only belong to one domain.
promVtpSnoopingUpdaterId
The IP address of the switch from which the VTP Snooping configuration was learned.
promVtpSnoopingUpdateTimeStamp
The time at which the VTP configuration changed on the initiating switch.
promVtpSnoopingConfigRevNum
VTP Configuration Revision Number on the switch that initiated the VTP message exchange.

MIBs list