RFCEnBridge-MIB Download

dot1dBaseBridgeAddress

The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenate ...

dot1dBaseNumPorts

The number of ports controlled by this bridging entity.

dot1dBaseType

Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.

dot1dBasePortTable

A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.

dot1dBasePortEntry

A list of information for each port of the bridge.

dot1dBasePortIfIndex

Identifies the port for which this entry contains bridge management information. The value of this object for a particular port has the same value as the ifIndex object, defined in [4,6], for the corresponding interface.

dot1dBasePortDelayExceededDiscards

The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.

dot1dBasePortMtuExceededDiscards

The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.

dot1dStpProtocolSpecification

An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tr ...

dot1dStpPriority

The value of the priority field which is contained in the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.

dot1dStpTimeSinceTopologyChange

The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity.

dot1dStpTopChanges

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

dot1dStpDesignatedRoot

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

dot1dStpRootCost

The cost of the path to the root as seen from this bridge.

dot1dStpRootPort

Identifies the port which offers the lowest cost path from this bridge to the root bridge. The value of this object indicates the port for which the ifIndex object, defined in [4,6], of the corresponding interface has the same value.

dot1dStpMaxAge

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.

dot1dStpHelloTime

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently u ...

dot1dStpHoldTime

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

dot1dStpForwardDelay

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state ...

dot1dStpBridgeMaxAge

The value that all bridges use for MaxAge when this bridge is acting as the root.

dot1dStpBridgeHelloTime

The value that all bridges use for HelloTime when this bridge is acting as the root.

dot1dStpBridgeForwardDelay

The value that all bridges use for ForwardDelay when this bridge is acting as the root.

dot1dStpPortTable

A table that contains port-specific information for the Spanning Tree Protocol.

dot1dStpPortEntry

A list of information maintained by every port about the Spanning Tree Protocol state for that port.

dot1dStpPortIfIndex

Identifies the port for which this entry contains Spanning Tree Protocol management information. The value of this object for a particular port has the same value as the ifIndex object, defined in [4,6], for the corresponding interface.

dot1dStpPortPriority

The value of the priority field which is contained in the first octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPortIfIndex.

dot1dStpPortState

The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(7) s ...

dot1dStpPortEnable

The enabled/disabled status of the port.

dot1dStpPortMultiCastAddr

The MAC address used as the destination for all Spanning Tree Protocol PDU generated out this port.

dot1dStpPortPathCost

The contribution of this port to the path cost of paths towards the spanning tree root which include this port.

dot1dStpPortDesignatedRoot

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the LAN to which the Port is attached.

dot1dStpPortDesignatedCost

The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.

dot1dStpPortDesignatedBridge

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

dot1dStpPortDesignatedPort

The Port Identifier of the port on the Designated Bridge for this port's segment.

dot1dStpPortForwardTransitions

The number of times this port has transitioned from the Learning state to the Forwarding state.

dot1dTpLearntEntryDiscards

The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database ...

dot1dTpAgingTime

The timeout period in seconds for aging out dynamically learned forwarding information.

dot1dTpFdbTable

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.

dot1dTpFdbEntry

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

dot1dTpFdbAddress

A unicast MAC address for which the bridge has forwarding and/or filtering information.

dot1dTpFdbPort

Either the value '0', or the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A non-zero value of this object indicates the port for which the ifIndex object, defined in [4 ...

dot1dTpFdbStatus

The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used ...

spanningTreeEnable

An indication of whether Spanning Tree is being run.

protFilterTable

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific protocols are allowed to be forwarded.

protFilterEntry

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific protocols are allowed to be forwarded.

protAddress

The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.

protReceivePort

The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates the port for which the ifIndex object, defined in [4,6], of the corresponding interface has th ...

protAllowedToGoTo

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 throug ...

protStatus

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the correspon ...

srcFilterTable

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific source addresses are allowed to be forwarded. Entries ar ...

srcFilterEntry

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific source address are allowed to be forwarded.

srcAddress

The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.

srcReceivePort

The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates the port for which the ifIndex object, defined in [4,6], of the corresponding interface has th ...

srcAllowedToGoTo

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 throug ...

srcStatus

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the correspon ...

destFilterTable

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. Entri ...

destFilterEntry

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

destAddress

The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.

destReceivePort

The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates the port for which the ifIndex object, defined in [4,6], of the corresponding interface has th ...

destAllowedToGoTo

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 throug ...

destStatus

This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the correspon ...

manualFilterSwitch

This object indicates the status of manual filter switches. enabled(1) - all manual filter switches entered in the filtering table are active. Therfore, the packet filtering decision process checks the manual filters to decide whether to filter/forward p ...

exclusiveFilter

This object indicates the status of manual filter switches. filter(1) - all addresses in the manual filtering table are filter addresses. Thus, if an incoming packet matches one of the addresses in the filtering table, the packet is filtered. This is th ...